src/ata.c

// Low level ATA disk access
//
// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2002  MandrakeSoft S.A.
//
// This file may be distributed under the terms of the GNU GPLv3 license.

#include "ata.h" // ATA_*
#include "types.h" // u8
#include "ioport.h" // inb
#include "util.h" // BX_INFO
#include "cmos.h" // inb_cmos

#define TIMEOUT 0
#define BSY 1
#define NOT_BSY 2
#define NOT_BSY_DRQ 3
#define NOT_BSY_NOT_DRQ 4
#define NOT_BSY_RDY 5

#define IDE_TIMEOUT 32000u //32 seconds max for IDE ops

#define DEBUGF1(fmt, args...) bprintf(0, fmt , ##args)
#define DEBUGF(fmt, args...)

// XXX - lots of redundancy in this file.

static int
await_ide(u8 when_done, u16 base, u16 timeout)
{
    u32 time=0, last=0;
    // for the times you're supposed to throw one away
    u16 status = inb(base + ATA_CB_STAT);
    for (;;) {
        status = inb(base+ATA_CB_STAT);
        time++;
        u8 result;
        if (when_done == BSY)
            result = status & ATA_CB_STAT_BSY;
        else if (when_done == NOT_BSY)
            result = !(status & ATA_CB_STAT_BSY);
        else if (when_done == NOT_BSY_DRQ)
            result = !(status & ATA_CB_STAT_BSY) && (status & ATA_CB_STAT_DRQ);
        else if (when_done == NOT_BSY_NOT_DRQ)
            result = !(status & ATA_CB_STAT_BSY) && !(status & ATA_CB_STAT_DRQ);
        else if (when_done == NOT_BSY_RDY)
            result = !(status & ATA_CB_STAT_BSY) && (status & ATA_CB_STAT_RDY);
        else if (when_done == TIMEOUT)
            result = 0;

        if (result)
            return 0;
        // mod 2048 each 16 ms
        if (time>>16 != last) {
            last = time >>16;
            DEBUGF("await_ide: (TIMEOUT,BSY,!BSY,!BSY_DRQ,!BSY_!DRQ,!BSY_RDY)"
                   " %d time= %d timeout= %d\n"
                   , when_done, time>>11, timeout);
        }
        if (status & ATA_CB_STAT_ERR) {
            DEBUGF("await_ide: ERROR (TIMEOUT,BSY,!BSY,!BSY_DRQ"
                   ",!BSY_!DRQ,!BSY_RDY) %d time= %d timeout= %d\n"
                   , when_done, time>>11, timeout);
            return -1;
        }
        if ((timeout == 0) || ((time>>11) > timeout))
            break;
    }
    BX_INFO("IDE time out\n");
    return -1;
}


// ---------------------------------------------------------------------------
// ATA/ATAPI driver : software reset
// ---------------------------------------------------------------------------
// ATA-3
// 8.2.1 Software reset - Device 0

void
ata_reset(u16 device)
{
    u16 iobase1, iobase2;
    u8  channel, slave, sn, sc;
    u8  type;

    channel = device / 2;
    slave = device % 2;

    iobase1 = GET_EBDA(ata.channels[channel].iobase1);
    iobase2 = GET_EBDA(ata.channels[channel].iobase2);

    // Reset

    // 8.2.1 (a) -- set SRST in DC
    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC);

    // 8.2.1 (b) -- wait for BSY
    await_ide(BSY, iobase1, 20);

    // 8.2.1 (f) -- clear SRST
    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC);

    type=GET_EBDA(ata.devices[device].type);
    if (type != ATA_TYPE_NONE) {

        // 8.2.1 (g) -- check for sc==sn==0x01
        // select device
        outb(slave?ATA_CB_DH_DEV1:ATA_CB_DH_DEV0, iobase1+ATA_CB_DH);
        sc = inb(iobase1+ATA_CB_SC);
        sn = inb(iobase1+ATA_CB_SN);

        if ( (sc==0x01) && (sn==0x01) ) {
            if (type == ATA_TYPE_ATA) //ATA
                await_ide(NOT_BSY_RDY, iobase1, IDE_TIMEOUT);
            else //ATAPI
                await_ide(NOT_BSY, iobase1, IDE_TIMEOUT);
        }

        // 8.2.1 (h) -- wait for not BSY
        await_ide(NOT_BSY, iobase1, IDE_TIMEOUT);
    }

    // Enable interrupts
    outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
}


// ---------------------------------------------------------------------------
// ATA/ATAPI driver : execute a data command
// ---------------------------------------------------------------------------
      // returns
      // 0 : no error
      // 1 : BUSY bit set
      // 2 : read error
      // 3 : expected DRQ=1
      // 4 : no sectors left to read/verify
      // 5 : more sectors to read/verify
      // 6 : no sectors left to write
      // 7 : more sectors to write

struct ata_pio_command {
    void *far_buffer;
    u8 biosid;

    u8 feature;
    u8 sector_count;
    u8 lba_low;
    u8 lba_mid;
    u8 lba_high;
    u8 device;
    u8 command;

    u8 sector_count2;
    u8 lba_low2;
    u8 lba_mid2;
    u8 lba_high2;
};

static int
send_cmd(struct ata_pio_command *cmd)
{
    u16 biosid = cmd->biosid;
    u8 channel = biosid / 2;
    u16 iobase1 = GET_EBDA(ata.channels[channel].iobase1);
    u16 iobase2 = GET_EBDA(ata.channels[channel].iobase2);

    u8 status = inb(iobase1 + ATA_CB_STAT);
    if (status & ATA_CB_STAT_BSY)
        return 1;

    outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC);
    if (cmd->command & 0x04) {
        outb(0x00, iobase1 + ATA_CB_FR);
        outb(cmd->sector_count2, iobase1 + ATA_CB_SC);
        outb(cmd->lba_low2, iobase1 + ATA_CB_SN);
        outb(cmd->lba_mid2, iobase1 + ATA_CB_CL);
        outb(cmd->lba_high2, iobase1 + ATA_CB_CH);
    }
    outb(cmd->feature, iobase1 + ATA_CB_FR);
    outb(cmd->sector_count, iobase1 + ATA_CB_SC);
    outb(cmd->lba_low, iobase1 + ATA_CB_SN);
    outb(cmd->lba_mid, iobase1 + ATA_CB_CL);
    outb(cmd->lba_high, iobase1 + ATA_CB_CH);
    outb(cmd->device, iobase1 + ATA_CB_DH);
    outb(cmd->command, iobase1 + ATA_CB_CMD);

    await_ide(NOT_BSY_DRQ, iobase1, IDE_TIMEOUT);

    status = inb(iobase1 + ATA_CB_STAT);
    if (status & ATA_CB_STAT_ERR) {
        DEBUGF("send_cmd : read error\n");
        return 2;
    }
    if (!(status & ATA_CB_STAT_DRQ)) {
        DEBUGF("send_cmd : DRQ not set (status %02x)\n"
               , (unsigned) status);
        return 3;
    }

    return 0;
}

static int
ata_transfer(struct ata_pio_command *cmd)
{
    DEBUGF("ata_transfer id=%d cmd=%d lba=%d count=%d buf=%p\n"
           , cmd->biosid, cmd->command
           , (cmd->lba_high << 16) | (cmd->lba_mid << 8) | cmd->lba_low
           , cmd->sector_count, cmd->far_buffer);

    // Reset count of transferred data
    SET_EBDA(ata.trsfsectors,0);
    SET_EBDA(ata.trsfbytes,0L);

    int ret = send_cmd(cmd);
    if (ret)
        return ret;

    u16 biosid = cmd->biosid;
    u8 channel  = biosid / 2;
    u16 iobase1 = GET_EBDA(ata.channels[channel].iobase1);
    u16 iobase2 = GET_EBDA(ata.channels[channel].iobase2);
    u8 mode     = GET_EBDA(ata.devices[biosid].mode);
    int iswrite = (cmd->command & ~0x40) == ATA_CMD_WRITE_SECTORS;
    u8 current = 0;
    u16 count = cmd->sector_count;
    u8 status;
    void *far_buffer = cmd->far_buffer;
    for (;;) {
        if (iswrite) {
            // Write data to controller
            DEBUGF("Write sector id=%d dest=%p\n", biosid, far_buffer);
            if (mode == ATA_MODE_PIO32)
                outsl_far(iobase1, far_buffer, 512 / 4);
            else
                outsw_far(iobase1, far_buffer, 512 / 2);
        } else {
            // Read data from controller
            DEBUGF("Read sector id=%d dest=%p\n", biosid, far_buffer);
            if (mode == ATA_MODE_PIO32)
                insl_far(iobase1, far_buffer, 512 / 4);
            else
                insw_far(iobase1, far_buffer, 512 / 2);
            await_ide(NOT_BSY, iobase1, IDE_TIMEOUT);
        }
        far_buffer += 512;

        current++;
        SET_EBDA(ata.trsfsectors,current);
        count--;
        status = inb(iobase1 + ATA_CB_STAT);
        if (count == 0)
            break;
        status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ
                   | ATA_CB_STAT_ERR);
        if (status != (ATA_CB_STAT_RDY | ATA_CB_STAT_DRQ)) {
            DEBUGF("ata_transfer : more sectors left (status %02x)\n"
                   , (unsigned) status);
            return 5;
        }
    }

    status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF
               | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR);
    if (!iswrite)
        status &= ~ATA_CB_STAT_DF;
    if (status != ATA_CB_STAT_RDY ) {
        DEBUGF("ata_transfer : no sectors left (status %02x)\n"
               , (unsigned) status);
        return 4;
    }

    // Enable interrupts
    outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
    return 0;
}

inline int
ata_cmd_data(u16 biosid, u16 command, u32 lba, u16 count, void *far_buffer)
{
    u8 slave   = biosid % 2;

    struct ata_pio_command cmd;
    cmd.far_buffer = far_buffer;
    cmd.biosid = biosid;

    if (count >= (1<<8) || lba + count >= (1<<28)) {
        cmd.sector_count2 = count >> 8;
        cmd.lba_low2 = lba >> 24;
        cmd.lba_mid2 = 0;
        cmd.lba_high2 = 0;

        command |= 0x04;
        lba &= 0xffffff;
    }

    cmd.feature = 0;
    cmd.sector_count = count;
    cmd.lba_low = lba;
    cmd.lba_mid = lba >> 8;
    cmd.lba_high = lba >> 16;
    cmd.device = ((slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0)
                  | ((lba >> 24) & 0xf) | ATA_CB_DH_LBA);
    cmd.command = command;
    return ata_transfer(&cmd);
}

// ---------------------------------------------------------------------------
// ATA/ATAPI driver : execute a packet command
// ---------------------------------------------------------------------------
      // returns
      // 0 : no error
      // 1 : error in parameters
      // 2 : BUSY bit set
      // 3 : error
      // 4 : not ready
static inline int
__ata_cmd_packet(u16 biosid, u8 *cmdbuf, u8 cmdlen
                 , u16 header, u32 length, void *far_buffer)
{
    DEBUGF("ata_cmd_packet d=%d cmdlen=%d h=%d l=%d buf=%p\n"
           , biosid, cmdlen, header, length, far_buffer);

    u8 channel = biosid / 2;
    u8 slave = biosid % 2;

    // The header length must be even
    if (header & 1) {
        DEBUGF("ata_cmd_packet : header must be even (%04x)\n", header);
        return 1;
    }

    u16 iobase1 = GET_EBDA(ata.channels[channel].iobase1);
    u16 iobase2 = GET_EBDA(ata.channels[channel].iobase2);
    u8 mode     = GET_EBDA(ata.devices[biosid].mode);

    struct ata_pio_command cmd;
    cmd.sector_count = 0;
    cmd.feature = 0;
    cmd.lba_low = 0;
    cmd.lba_mid = 0xf0;
    cmd.lba_high = 0xff;
    cmd.device = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0;
    cmd.command = ATA_CMD_PACKET;

    cmd.biosid = biosid;
    int ret = send_cmd(&cmd);
    if (ret)
        return ret;

    // Reset count of transferred data
    SET_EBDA(ata.trsfsectors,0);
    SET_EBDA(ata.trsfbytes,0L);

    // Send command to device
    outsw_far(iobase1, MAKE_FARPTR(GET_SEG(SS), (u32)cmdbuf), cmdlen / 2);

    u8 status;
    u16 loops = 0;
    for (;;) {
        if (loops == 0) {//first time through
            status = inb(iobase2 + ATA_CB_ASTAT);
            await_ide(NOT_BSY_DRQ, iobase1, IDE_TIMEOUT);
        } else
            await_ide(NOT_BSY, iobase1, IDE_TIMEOUT);
        loops++;

        status = inb(iobase1 + ATA_CB_STAT);
        inb(iobase1 + ATA_CB_SC);

        // Check if command completed
        if(((inb(iobase1 + ATA_CB_SC)&0x7)==0x3) &&
           ((status & (ATA_CB_STAT_RDY | ATA_CB_STAT_ERR)) == ATA_CB_STAT_RDY))
            break;

        if (status & ATA_CB_STAT_ERR) {
            DEBUGF("ata_cmd_packet : error (status %02x)\n", status);
            return 3;
        }

        // Get the byte count
        u16 lcount =  (((u16)(inb(iobase1 + ATA_CB_CH))<<8)
                       + inb(iobase1 + ATA_CB_CL));

        // adjust to read what we want
        u16 lbefore, lafter;
        if (header > lcount) {
            lbefore=lcount;
            header-=lcount;
            lcount=0;
        } else {
            lbefore=header;
            header=0;
            lcount-=lbefore;
        }

        if (lcount > length) {
            lafter=lcount-length;
            lcount=length;
            length=0;
        } else {
            lafter=0;
            length-=lcount;
        }

        // Save byte count
        u16 count = lcount;

        DEBUGF("Trying to read %04x bytes (%04x %04x %04x) to %p\n"
               , lbefore+lcount+lafter, lbefore, lcount, lafter, far_buffer);

        // If counts not dividable by 4, use 16bits mode
        u8 lmode = mode;
        if (lbefore & 0x03) lmode=ATA_MODE_PIO16;
        if (lcount  & 0x03) lmode=ATA_MODE_PIO16;
        if (lafter  & 0x03) lmode=ATA_MODE_PIO16;

        // adds an extra byte if count are odd. before is always even
        if (lcount & 0x01) {
            lcount+=1;
            if ((lafter > 0) && (lafter & 0x01)) {
                lafter-=1;
            }
        }

        if (lmode == ATA_MODE_PIO32) {
            lcount>>=2; lbefore>>=2; lafter>>=2;
        } else {
            lcount>>=1; lbefore>>=1; lafter>>=1;
        }

        int i;
        for (i=0; i<lbefore; i++)
            if (lmode == ATA_MODE_PIO32)
                inl(iobase1);
            else
                inw(iobase1);

        if (lmode == ATA_MODE_PIO32)
            insl_far(iobase1, far_buffer, lcount);
        else
            insw_far(iobase1, far_buffer, lcount);

        for (i=0; i<lafter; i++)
            if (lmode == ATA_MODE_PIO32)
                inl(iobase1);
            else
                inw(iobase1);

        // Compute new buffer address
        far_buffer += count;

        // Save transferred bytes count
        SET_EBDA(ata.trsfsectors, loops);
    }

    // Final check, device must be ready
    if ( (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_RDY | ATA_CB_STAT_DF
                    | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR) )
         != ATA_CB_STAT_RDY ) {
        DEBUGF("ata_cmd_packet : not ready (status %02x)\n"
               , (unsigned) status);
        return 4;
    }

    // Enable interrupts
    outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC);
    return 0;
}

int
ata_cmd_packet(u16 biosid, u8 *cmdbuf, u8 cmdlen
               , u32 length, void *far_buffer)
{
    return __ata_cmd_packet(biosid, cmdbuf, cmdlen, 0, length, far_buffer);
}

static void
build_cdrom_cmd(u8 *atacmd, u32 lba, u16 count)
{
    memset(atacmd, 0, 12);
    atacmd[0]=0x28;                     // READ command
    atacmd[7]=(count & 0xff00) >> 8;    // Sectors
    atacmd[8]=(count & 0x00ff);         // Sectors
    atacmd[2]=(lba & 0xff000000) >> 24; // LBA
    atacmd[3]=(lba & 0x00ff0000) >> 16;
    atacmd[4]=(lba & 0x0000ff00) >> 8;
    atacmd[5]=(lba & 0x000000ff);
}

// Read sectors from the cdrom.
int
cdrom_read(u16 biosid, u32 lba, u32 count, void *far_buffer)
{
    u8 atacmd[12];
    build_cdrom_cmd(atacmd, lba, count);
    return ata_cmd_packet(biosid, atacmd, sizeof(atacmd)
                          , count*2048, far_buffer);
}

// Pretend the cdrom has 512 byte sectors (instead of 2048) and read
// sectors.
int
cdrom_read_512(u16 biosid, u32 vlba, u32 count, void *far_buffer)
{
    u32 slba = vlba / 4;
    u16 before = vlba % 4;
    u32 elba = (vlba + count - 1) / 4;

    u8 atacmd[12];
    build_cdrom_cmd(atacmd, slba, elba - slba + 1);

    int status = __ata_cmd_packet(biosid, atacmd, sizeof(atacmd)
                                  , before*512, count*512, far_buffer);
    if (status) {
        SET_EBDA(ata.trsfsectors, 0);
        return status;
    }
    SET_EBDA(ata.trsfsectors, count);
    return 0;
}


// ---------------------------------------------------------------------------
// ATA/ATAPI driver : device detection
// ---------------------------------------------------------------------------

static void
report_model(u8 devid, u8 *buffer)
{
    u8 model[41];

    // Read model name
    int i;
    for (i=0; i<40; i+=2) {
        model[i] = buffer[i+54+1];
        model[i+1] = buffer[i+54];
    }

    // Reformat
    model[40] = 0x00;
    for (i=39; i>0; i--) {
        if (model[i] != 0x20)
            break;
        model[i] = 0x00;
    }

    u8 channel = devid / 2;
    u8 slave = devid % 2;
    // XXX - model on stack not %cs
    printf("ata%d %s: %s", channel, slave ? " slave" : "master", model);
}

static u8
get_ata_version(u8 *buffer)
{
    u16 ataversion = *(u16*)&buffer[160];
    u8 version;
    for (version=15; version>0; version--)
        if (ataversion & (1<<version))
            break;
    return version;
}

static void
init_drive_atapi(u8 devid)
{
    SET_EBDA(ata.devices[devid].type,ATA_TYPE_ATAPI);

    // Temporary values to do the transfer
    SET_EBDA(ata.devices[devid].device,ATA_DEVICE_CDROM);
    SET_EBDA(ata.devices[devid].mode, ATA_MODE_PIO16);

    // Now we send a IDENTIFY command to ATAPI device
    u8 buffer[0x0200];
    memset(buffer, 0, sizeof(buffer));
    u16 ret = ata_cmd_data(devid, ATA_CMD_IDENTIFY_DEVICE_PACKET
                           , 1, 1
                           , MAKE_FARPTR(GET_SEG(SS), (u32)buffer));
    if (ret != 0)
        BX_PANIC("ata-detect: Failed to detect ATAPI device\n");

    u8 type      = buffer[1] & 0x1f;
    u8 removable = (buffer[0] & 0x80) ? 1 : 0;
    u8 mode      = buffer[96] ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
    u16 blksize  = 2048;

    SET_EBDA(ata.devices[devid].device, type);
    SET_EBDA(ata.devices[devid].removable, removable);
    SET_EBDA(ata.devices[devid].mode, mode);
    SET_EBDA(ata.devices[devid].blksize, blksize);

    // fill cdidmap
    u8 cdcount = GET_EBDA(ata.cdcount);
    SET_EBDA(ata.idmap[1][cdcount], devid);
    SET_EBDA(ata.cdcount, ++cdcount);

    report_model(devid, buffer);
    u8 version = get_ata_version(buffer);
    if (GET_EBDA(ata.devices[devid].device)==ATA_DEVICE_CDROM)
        printf(" ATAPI-%d CD-Rom/DVD-Rom\n", version);
    else
        printf(" ATAPI-%d Device\n", version);
}

static void
init_drive_ata(u8 devid)
{
    SET_EBDA(ata.devices[devid].type,ATA_TYPE_ATA);

    // Temporary values to do the transfer
    SET_EBDA(ata.devices[devid].device, ATA_DEVICE_HD);
    SET_EBDA(ata.devices[devid].mode, ATA_MODE_PIO16);

    // Now we send a IDENTIFY command to ATA device
    u8 buffer[0x0200];
    memset(buffer, 0, sizeof(buffer));
    u16 ret = ata_cmd_data(devid, ATA_CMD_IDENTIFY_DEVICE
                           , 1, 1
                           , MAKE_FARPTR(GET_SEG(SS), (u32)buffer));
    if (ret)
        BX_PANIC("ata-detect: Failed to detect ATA device\n");

    u8 removable  = (buffer[0] & 0x80) ? 1 : 0;
    u8 mode       = buffer[96] ? ATA_MODE_PIO32 : ATA_MODE_PIO16;
    u16 blksize   = *(u16*)&buffer[10];

    u16 cylinders = *(u16*)&buffer[1*2]; // word 1
    u16 heads     = *(u16*)&buffer[3*2]; // word 3
    u16 spt       = *(u16*)&buffer[6*2]; // word 6

    u32 sectors   = *(u32*)&buffer[60*2]; // word 60 and word 61

    SET_EBDA(ata.devices[devid].device,ATA_DEVICE_HD);
    SET_EBDA(ata.devices[devid].removable, removable);
    SET_EBDA(ata.devices[devid].mode, mode);
    SET_EBDA(ata.devices[devid].blksize, blksize);
    SET_EBDA(ata.devices[devid].pchs.heads, heads);
    SET_EBDA(ata.devices[devid].pchs.cylinders, cylinders);
    SET_EBDA(ata.devices[devid].pchs.spt, spt);
    SET_EBDA(ata.devices[devid].sectors, sectors);

    u8 channel = devid / 2;
    u8 slave = devid % 2;
    u8 translation = inb_cmos(CMOS_BIOS_DISKTRANSFLAG + channel/2);
    u8 shift;
    for (shift=devid%4; shift>0; shift--)
        translation >>= 2;
    translation &= 0x03;

    SET_EBDA(ata.devices[devid].translation, translation);

    BX_INFO("ata%d-%d: PCHS=%u/%d/%d translation="
            , channel, slave, cylinders, heads, spt);
    switch (translation) {
    case ATA_TRANSLATION_NONE:
        BX_INFO("none");
        break;
    case ATA_TRANSLATION_LBA:
        BX_INFO("lba");
        spt = 63;
        sectors /= 63;
        heads = sectors / 1024;
        if (heads>128)
            heads = 255;
        else if (heads>64)
            heads = 128;
        else if (heads>32)
            heads = 64;
        else if (heads>16)
            heads = 32;
        else
            heads = 16;
        cylinders = sectors / heads;
        break;
    case ATA_TRANSLATION_RECHS:
        BX_INFO("r-echs");
        // Take care not to overflow
        if (heads==16) {
            if (cylinders>61439)
                cylinders=61439;
            heads=15;
            cylinders = (u16)((u32)(cylinders)*16/15);
        }
        // then go through the large bitshift process
    case ATA_TRANSLATION_LARGE:
        if (translation == ATA_TRANSLATION_LARGE)
            BX_INFO("large");
        while(cylinders > 1024) {
            cylinders >>= 1;
            heads <<= 1;

            // If we max out the head count
            if (heads > 127)
                break;
        }
        break;
    }
    // clip to 1024 cylinders in lchs
    if (cylinders > 1024)
        cylinders = 1024;
    BX_INFO(" LCHS=%d/%d/%d\n", cylinders, heads, spt);

    SET_EBDA(ata.devices[devid].lchs.heads, heads);
    SET_EBDA(ata.devices[devid].lchs.cylinders, cylinders);
    SET_EBDA(ata.devices[devid].lchs.spt, spt);

    // fill hdidmap
    u8 hdcount = GET_EBDA(ata.hdcount);
    SET_EBDA(ata.idmap[0][hdcount], devid);
    SET_EBDA(ata.hdcount, ++hdcount);

    u32 sizeinmb = GET_EBDA(ata.devices[devid].sectors);
    sizeinmb >>= 11;

    report_model(devid, buffer);
    u8 version = get_ata_version(buffer);
    if (sizeinmb < (1 << 16))
        printf(" ATA-%d Hard-Disk (%u MBytes)\n", version, sizeinmb);
    else
        printf(" ATA-%d Hard-Disk (%u GBytes)\n", version, sizeinmb >> 10);
}

static void
init_drive_unknown(u8 devid)
{
    SET_EBDA(ata.devices[devid].type,ATA_TYPE_UNKNOWN);

    u8 channel = devid / 2;
    u8 slave = devid % 2;
    printf("ata%d %s: Unknown device\n", channel, slave ? " slave" : "master");
}

void
ata_detect()
{
#if CONFIG_MAX_ATA_INTERFACES > 0
    SET_EBDA(ata.channels[0].iface,ATA_IFACE_ISA);
    SET_EBDA(ata.channels[0].iobase1,0x1f0);
    SET_EBDA(ata.channels[0].iobase2,0x3f0);
    SET_EBDA(ata.channels[0].irq,14);
#endif
#if CONFIG_MAX_ATA_INTERFACES > 1
    SET_EBDA(ata.channels[1].iface,ATA_IFACE_ISA);
    SET_EBDA(ata.channels[1].iobase1,0x170);
    SET_EBDA(ata.channels[1].iobase2,0x370);
    SET_EBDA(ata.channels[1].irq,15);
#endif
#if CONFIG_MAX_ATA_INTERFACES > 2
    SET_EBDA(ata.channels[2].iface,ATA_IFACE_ISA);
    SET_EBDA(ata.channels[2].iobase1,0x1e8);
    SET_EBDA(ata.channels[2].iobase2,0x3e0);
    SET_EBDA(ata.channels[2].irq,12);
#endif
#if CONFIG_MAX_ATA_INTERFACES > 3
    SET_EBDA(ata.channels[3].iface,ATA_IFACE_ISA);
    SET_EBDA(ata.channels[3].iobase1,0x168);
    SET_EBDA(ata.channels[3].iobase2,0x360);
    SET_EBDA(ata.channels[3].irq,11);
#endif
#if CONFIG_MAX_ATA_INTERFACES > 4
#error Please fill the ATA interface informations
#endif

    // Device detection
    u8 devid;
    for(devid=0; devid<CONFIG_MAX_ATA_DEVICES; devid++) {
        u8 channel = devid / 2;
        u8 slave = devid % 2;

        u16 iobase1 = GET_EBDA(ata.channels[channel].iobase1);
        u16 iobase2 = GET_EBDA(ata.channels[channel].iobase2);

        // Disable interrupts
        outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC);

        // Look for device
        outb(slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0, iobase1+ATA_CB_DH);
        outb(0x55, iobase1+ATA_CB_SC);
        outb(0xaa, iobase1+ATA_CB_SN);
        outb(0xaa, iobase1+ATA_CB_SC);
        outb(0x55, iobase1+ATA_CB_SN);
        outb(0x55, iobase1+ATA_CB_SC);
        outb(0xaa, iobase1+ATA_CB_SN);

        // If we found something
        u8 sc = inb(iobase1+ATA_CB_SC);
        u8 sn = inb(iobase1+ATA_CB_SN);

        if (sc != 0x55 || sn != 0xaa)
            continue;

        // reset the channel
        ata_reset(devid);

        // check for ATA or ATAPI
        outb(slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0, iobase1+ATA_CB_DH);
        sc = inb(iobase1+ATA_CB_SC);
        sn = inb(iobase1+ATA_CB_SN);
        if (sc!=0x01 || sn!=0x01) {
            init_drive_unknown(devid);
            continue;
        }
        u8 cl = inb(iobase1+ATA_CB_CL);
        u8 ch = inb(iobase1+ATA_CB_CH);
        u8 st = inb(iobase1+ATA_CB_STAT);

        if (cl==0x14 && ch==0xeb)
            init_drive_atapi(devid);
        else if (cl==0x00 && ch==0x00 && st!=0x00)
            init_drive_ata(devid);
        else if (cl==0xff && ch==0xff)
            // None
            continue;
        else
            init_drive_unknown(devid);
    }

    // Store the device count
    SET_BDA(disk_count, GET_EBDA(ata.hdcount));

    printf("\n");

    // FIXME : should use bios=cmos|auto|disable bits
    // FIXME : should know about translation bits
    // FIXME : move hard_drive_post here
}