src/boot.c

// 16bit code to load disk image and start system boot.
//
// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
// Copyright (C) 2002  MandrakeSoft S.A.
//
// This file may be distributed under the terms of the GNU GPLv3 license.

#include "util.h" // irq_enable
#include "biosvar.h" // struct bregs
#include "config.h" // CONFIG_*
#include "cmos.h" // inb_cmos

//--------------------------------------------------------------------------
// print_boot_device
//   displays the boot device
//--------------------------------------------------------------------------

static const char drivetypes[][10]={
    "", "Floppy","Hard Disk","CD-Rom", "Network"
};

static void
print_boot_device(u16 type)
{
    /* NIC appears as type 0x80 */
    if (type == IPL_TYPE_BEV)
        type = 0x4;
    if (type == 0 || type > 0x4)
        BX_PANIC("Bad drive type\n");
    printf("Booting from %s...\n", drivetypes[type]);
}

//--------------------------------------------------------------------------
// print_boot_failure
//   displays the reason why boot failed
//--------------------------------------------------------------------------
static void
print_boot_failure(u16 type, u8 reason)
{
    if (type == 0 || type > 0x3)
        BX_PANIC("Bad drive type\n");

    printf("Boot from %s failed", drivetypes[type]);
    if (type < 4) {
        /* Report the reason too */
        if (reason==0)
            printf(": not a bootable disk");
        else
            printf(": could not read the boot disk");
    }
    printf("\n");
}

static void
try_boot(u16 seq_nr)
{
    SET_IPL(sequence, seq_nr);
    u16 bootseg;
    u8 bootdrv = 0;
    u16 bootdev, bootip;

    if (CONFIG_ELTORITO_BOOT) {
        bootdev = inb_cmos(CMOS_BIOS_BOOTFLAG2);
        bootdev |= ((inb_cmos(CMOS_BIOS_BOOTFLAG1) & 0xf0) << 4);
        bootdev >>= 4 * seq_nr;
        bootdev &= 0xf;
        if (bootdev == 0)
            BX_PANIC("No bootable device.\n");

        /* Translate from CMOS runes to an IPL table offset by subtracting 1 */
        bootdev -= 1;
    } else {
        if (seq_nr ==2)
            BX_PANIC("No more boot devices.");
        if (!!(inb_cmos(CMOS_BIOS_CONFIG) & 0x20) ^ (seq_nr == 1))
            /* Boot from floppy if the bit is set or it's the second boot */
            bootdev = 0x00;
        else
            bootdev = 0x01;
    }

    if (bootdev >= GET_IPL(count)) {
        BX_INFO("Invalid boot device (0x%x)\n", bootdev);
        return;
    }
    u16 type = GET_IPL(table[bootdev].type);

    /* Do the loading, and set up vector as a far pointer to the boot
     * address, and bootdrv as the boot drive */
    print_boot_device(type);

    struct bregs cr;
    switch(type) {
    case IPL_TYPE_FLOPPY: /* FDD */
    case IPL_TYPE_HARDDISK: /* HDD */

        bootdrv = (type == IPL_TYPE_HARDDISK) ? 0x80 : 0x00;
        bootseg = 0x07c0;

        // Read sector
        memset(&cr, 0, sizeof(cr));
        cr.dl = bootdrv;
        cr.es = bootseg;
        cr.ah = 2;
        cr.al = 1;
        cr.cl = 1;
        call16_int(0x13, &cr);

        if (cr.flags & F_CF) {
            print_boot_failure(type, 1);
            return;
        }

        /* Always check the signature on a HDD boot sector; on FDD,
         * only do the check if the CMOS doesn't tell us to skip it */
        if ((type != IPL_TYPE_FLOPPY)
            || !((inb_cmos(CMOS_BIOS_BOOTFLAG1) & 0x01))) {
            if (GET_FARVAR(bootseg, *(u16*)0x1fe) != 0xaa55) {
                print_boot_failure(type, 0);
                return;
            }
        }

        /* Canonicalize bootseg:bootip */
        bootip = (bootseg & 0x0fff) << 4;
        bootseg &= 0xf000;
        break;
    case IPL_TYPE_CDROM: /* CD-ROM */
        // XXX
        return;
        break;
    case IPL_TYPE_BEV: {
        /* Expansion ROM with a Bootstrap Entry Vector (a far
         * pointer) */
        u32 vector = GET_IPL(table[bootdev].vector);
        bootseg = vector >> 16;
        bootip = vector & 0xffff;
        break;
    }
    default:
        return;
    }

    memset(&cr, 0, sizeof(cr));
    cr.ip = bootip;
    cr.cs = bootseg;
    // Set the magic number in ax and the boot drive in dl.
    cr.dl = bootdrv;
    cr.ax = 0xaa55;
    call16(&cr);

    // Boot failed: invoke the boot recovery function
    memset(&cr, 0, sizeof(cr));
    call16_int(0x18, &cr);
}

// Boot Failure recovery: try the next device.
void VISIBLE
handle_18()
{
    debug_enter(NULL);
    u16 seq = GET_IPL(sequence) + 1;
    try_boot(seq);
}

// INT 19h Boot Load Service Entry Point
void VISIBLE
handle_19()
{
    debug_enter(NULL);
    try_boot(0);
}

// Called from 32bit code - start boot process
void VISIBLE
begin_boot()
{
    irq_enable();
    struct bregs br;
    memset(&br, 0, sizeof(br));
    call16_int(0x19, &br);
}