| Uwe Hermann | d71834a | 2013-01-21 00:59:59 +0100 | [diff] [blame^] | 1 | 0.1.1 (2013-01-27) |
| Uwe Hermann | 90a31a0 | 2013-01-07 22:25:33 +0100 | [diff] [blame] | 2 | ------------------ |
| 3 | |
| 4 | * Note: This release does NOT change the libsigrokdecode public C API. This |
| 5 | means existing libsigrokdecode frontends should not require any changes. |
| 6 | However, individual PDs and their output changed, which may require |
| 7 | some adaptations on the user's side in some cases. |
| 8 | * New supported protocol decoders: |
| 9 | - avr_isp AVR In-System Programming |
| 10 | - can Controller Area Network |
| 11 | - jtag Joint Test Action Group (IEEE 1149.1) |
| 12 | - jtag_stm32 Joint Test Action Group / ST STM32 |
| 13 | - lm75 National LM75 |
| 14 | - lpc Low-Pin-Count |
| 15 | - maxim_ds28ea00 Maxim DS28EA00 1-Wire digital thermometer |
| 16 | - onewire_link 1-Wire serial communication bus (link layer) |
| 17 | - onewire_network 1-Wire serial communication bus (network layer) |
| 18 | - sdcard_spi Secure Digital card (SPI mode) |
| 19 | - tlc5620 Texas Instruments TLC5620 |
| 20 | - uart_dump UART dump |
| 21 | * i2cfilter: Now outputs 'i2c' packets instead of just data bytes, so |
| 22 | other PDs can stack on top of it. It filters by I2C slave address. |
| 23 | * edid: Now takes 'i2c' packets as input. |
| 24 | * pan1321: |
| 25 | - Various bugfixes to make the PD actually work. |
| 26 | - Now features 'Text (short)' and 'Text (verbose)' outputs. |
| 27 | * usb: |
| 28 | - The PD is split into 'usb_signalling' and 'usb_protocol' (stacked on top). |
| 29 | - Various bugfixes to make the PD work (better). |
| 30 | - The DP/DM probes were swapped, this is now fixed. |
| 31 | - Preliminary support for USB low-speed (in addition to full-speed). |
| 32 | * mlx90614: Minor bugfixes. |
| 33 | * dcf77: |
| 34 | - Major bugfix, this PD was not working correctly at all. |
| 35 | - Handle PON signal. |
| 36 | * nunchuk: Complete rewrite, works (better) now. |
| 37 | * spi: Update docs, send CS# change packets, change output API slightly. |
| 38 | If you have a PD which stacks on top of SPI, it'll need to be adapted. |
| 39 | The PDs that ship with libsigrokdecode are updated already. |
| 40 | * mx25lxx05d: |
| 41 | - Implement support for the READ, RDSR, and PP commands. |
| 42 | - Decode status register bits. |
| 43 | - Fix SE command handling. |
| 44 | - Fix inverted SRWD bit handling. |
| 45 | * Various smaller style and consistency changes in code and PD descriptions. |
| 46 | * Fix the build with Homebrew on Mac OS X. |
| 47 | * Performance improvements in some PDs. |
| 48 | * Documentation: Update website and git URLs. |
| 49 | * pkg-config file: Small fix to improve behaviour on Windows with cmake. |
| Uwe Hermann | a860b7c | 2013-01-21 00:39:53 +0100 | [diff] [blame] | 50 | * All PD implementation files are now named 'pd.py' consistently. |
| Uwe Hermann | 90a31a0 | 2013-01-07 22:25:33 +0100 | [diff] [blame] | 51 | * configure script: |
| 52 | - Also check for python3.3-config in addition to python-config and others. |
| 53 | - Add missing -fvisibility=hidden to default CFLAGS. |
| 54 | - Fix CFLAGS handling (configure.ac amends CFLAGS, doesn't overwrite now). |
| Uwe Hermann | a860b7c | 2013-01-21 00:39:53 +0100 | [diff] [blame] | 55 | * The minimum required glib version is 2.24.0 now. |
| 56 | * We now ship a standard INSTALL file which documents the 'configure' options. |
| Uwe Hermann | 90a31a0 | 2013-01-07 22:25:33 +0100 | [diff] [blame] | 57 | |
| Uwe Hermann | 6b24918 | 2012-04-17 00:12:56 +0200 | [diff] [blame] | 58 | 0.1.0 (2012-04-17) |
| Uwe Hermann | dc17baf | 2012-03-31 11:37:19 +0200 | [diff] [blame] | 59 | ------------------ |
| 60 | |
| 61 | * Initial release. |
| 62 | |