src/where.c

/*
** 2001 September 15
**
** The author disclaims copyright to this source code.  In place of
** a legal notice, here is a blessing:
**
**    May you do good and not evil.
**    May you find forgiveness for yourself and forgive others.
**    May you share freely, never taking more than you give.
**
*************************************************************************
** This module contains C code that generates VDBE code used to process
** the WHERE clause of SQL statements.  This module is responsible for
** generating the code that loops through a table looking for applicable
** rows.  Indices are selected and used to speed the search when doing
** so is applicable.  Because this module is responsible for selecting
** indices, you might also think of this module as the "query optimizer".
**
** $Id: where.c,v 1.391 2009/04/29 11:50:54 danielk1977 Exp $
*/
#include "sqliteInt.h"

/*
** Trace output macros
*/
#if defined(SQLITE_TEST) || defined(SQLITE_DEBUG)
int sqlite3WhereTrace = 0;
#endif
#if defined(SQLITE_TEST) && defined(SQLITE_DEBUG)
# define WHERETRACE(X)  if(sqlite3WhereTrace) sqlite3DebugPrintf X
#else
# define WHERETRACE(X)
#endif

/* Forward reference
*/
typedef struct WhereClause WhereClause;
typedef struct WhereMaskSet WhereMaskSet;
typedef struct WhereOrInfo WhereOrInfo;
typedef struct WhereAndInfo WhereAndInfo;
typedef struct WhereCost WhereCost;

/*
** The query generator uses an array of instances of this structure to
** help it analyze the subexpressions of the WHERE clause.  Each WHERE
** clause subexpression is separated from the others by AND operators,
** usually, or sometimes subexpressions separated by OR.
**
** All WhereTerms are collected into a single WhereClause structure.  
** The following identity holds:
**
**        WhereTerm.pWC->a[WhereTerm.idx] == WhereTerm
**
** When a term is of the form:
**
**              X <op> <expr>
**
** where X is a column name and <op> is one of certain operators,
** then WhereTerm.leftCursor and WhereTerm.u.leftColumn record the
** cursor number and column number for X.  WhereTerm.eOperator records
** the <op> using a bitmask encoding defined by WO_xxx below.  The
** use of a bitmask encoding for the operator allows us to search
** quickly for terms that match any of several different operators.
**
** A WhereTerm might also be two or more subterms connected by OR:
**
**         (t1.X <op> <expr>) OR (t1.Y <op> <expr>) OR ....
**
** In this second case, wtFlag as the TERM_ORINFO set and eOperator==WO_OR
** and the WhereTerm.u.pOrInfo field points to auxiliary information that
** is collected about the
**
** If a term in the WHERE clause does not match either of the two previous
** categories, then eOperator==0.  The WhereTerm.pExpr field is still set
** to the original subexpression content and wtFlags is set up appropriately
** but no other fields in the WhereTerm object are meaningful.
**
** When eOperator!=0, prereqRight and prereqAll record sets of cursor numbers,
** but they do so indirectly.  A single WhereMaskSet structure translates
** cursor number into bits and the translated bit is stored in the prereq
** fields.  The translation is used in order to maximize the number of
** bits that will fit in a Bitmask.  The VDBE cursor numbers might be
** spread out over the non-negative integers.  For example, the cursor
** numbers might be 3, 8, 9, 10, 20, 23, 41, and 45.  The WhereMaskSet
** translates these sparse cursor numbers into consecutive integers
** beginning with 0 in order to make the best possible use of the available
** bits in the Bitmask.  So, in the example above, the cursor numbers
** would be mapped into integers 0 through 7.
**
** The number of terms in a join is limited by the number of bits
** in prereqRight and prereqAll.  The default is 64 bits, hence SQLite
** is only able to process joins with 64 or fewer tables.
*/
typedef struct WhereTerm WhereTerm;
struct WhereTerm {
  Expr *pExpr;            /* Pointer to the subexpression that is this term */
  int iParent;            /* Disable pWC->a[iParent] when this term disabled */
  int leftCursor;         /* Cursor number of X in "X <op> <expr>" */
  union {
    int leftColumn;         /* Column number of X in "X <op> <expr>" */
    WhereOrInfo *pOrInfo;   /* Extra information if eOperator==WO_OR */
    WhereAndInfo *pAndInfo; /* Extra information if eOperator==WO_AND */
  } u;
  u16 eOperator;          /* A WO_xx value describing <op> */
  u8 wtFlags;             /* TERM_xxx bit flags.  See below */
  u8 nChild;              /* Number of children that must disable us */
  WhereClause *pWC;       /* The clause this term is part of */
  Bitmask prereqRight;    /* Bitmask of tables used by pExpr->pRight */
  Bitmask prereqAll;      /* Bitmask of tables referenced by pExpr */
};

/*
** Allowed values of WhereTerm.wtFlags
*/
#define TERM_DYNAMIC    0x01   /* Need to call sqlite3ExprDelete(db, pExpr) */
#define TERM_VIRTUAL    0x02   /* Added by the optimizer.  Do not code */
#define TERM_CODED      0x04   /* This term is already coded */
#define TERM_COPIED     0x08   /* Has a child */
#define TERM_ORINFO     0x10   /* Need to free the WhereTerm.u.pOrInfo object */
#define TERM_ANDINFO    0x20   /* Need to free the WhereTerm.u.pAndInfo obj */
#define TERM_OR_OK      0x40   /* Used during OR-clause processing */

/*
** An instance of the following structure holds all information about a
** WHERE clause.  Mostly this is a container for one or more WhereTerms.
*/
struct WhereClause {
  Parse *pParse;           /* The parser context */
  WhereMaskSet *pMaskSet;  /* Mapping of table cursor numbers to bitmasks */
  u8 op;                   /* Split operator.  TK_AND or TK_OR */
  int nTerm;               /* Number of terms */
  int nSlot;               /* Number of entries in a[] */
  WhereTerm *a;            /* Each a[] describes a term of the WHERE cluase */
  WhereTerm aStatic[4];    /* Initial static space for a[] */
};

/*
** A WhereTerm with eOperator==WO_OR has its u.pOrInfo pointer set to
** a dynamically allocated instance of the following structure.
*/
struct WhereOrInfo {
  WhereClause wc;          /* Decomposition into subterms */
  Bitmask indexable;       /* Bitmask of all indexable tables in the clause */
};

/*
** A WhereTerm with eOperator==WO_AND has its u.pAndInfo pointer set to
** a dynamically allocated instance of the following structure.
*/
struct WhereAndInfo {
  WhereClause wc;          /* The subexpression broken out */
};

/*
** An instance of the following structure keeps track of a mapping
** between VDBE cursor numbers and bits of the bitmasks in WhereTerm.
**
** The VDBE cursor numbers are small integers contained in 
** SrcList_item.iCursor and Expr.iTable fields.  For any given WHERE 
** clause, the cursor numbers might not begin with 0 and they might
** contain gaps in the numbering sequence.  But we want to make maximum
** use of the bits in our bitmasks.  This structure provides a mapping
** from the sparse cursor numbers into consecutive integers beginning
** with 0.
**
** If WhereMaskSet.ix[A]==B it means that The A-th bit of a Bitmask
** corresponds VDBE cursor number B.  The A-th bit of a bitmask is 1<<A.
**
** For example, if the WHERE clause expression used these VDBE
** cursors:  4, 5, 8, 29, 57, 73.  Then the  WhereMaskSet structure
** would map those cursor numbers into bits 0 through 5.
**
** Note that the mapping is not necessarily ordered.  In the example
** above, the mapping might go like this:  4->3, 5->1, 8->2, 29->0,
** 57->5, 73->4.  Or one of 719 other combinations might be used. It
** does not really matter.  What is important is that sparse cursor
** numbers all get mapped into bit numbers that begin with 0 and contain
** no gaps.
*/
struct WhereMaskSet {
  int n;                        /* Number of assigned cursor values */
  int ix[BMS];                  /* Cursor assigned to each bit */
};

/*
** A WhereCost object records a lookup strategy and the estimated
** cost of pursuing that strategy.
*/
struct WhereCost {
  WherePlan plan;    /* The lookup strategy */
  double rCost;      /* Overall cost of pursuing this search strategy */
  double nRow;       /* Estimated number of output rows */
};

/*
** Bitmasks for the operators that indices are able to exploit.  An
** OR-ed combination of these values can be used when searching for
** terms in the where clause.
*/
#define WO_IN     0x001
#define WO_EQ     0x002
#define WO_LT     (WO_EQ<<(TK_LT-TK_EQ))
#define WO_LE     (WO_EQ<<(TK_LE-TK_EQ))
#define WO_GT     (WO_EQ<<(TK_GT-TK_EQ))
#define WO_GE     (WO_EQ<<(TK_GE-TK_EQ))
#define WO_MATCH  0x040
#define WO_ISNULL 0x080
#define WO_OR     0x100       /* Two or more OR-connected terms */
#define WO_AND    0x200       /* Two or more AND-connected terms */

#define WO_ALL    0xfff       /* Mask of all possible WO_* values */
#define WO_SINGLE 0x0ff       /* Mask of all non-compound WO_* values */

/*
** Value for wsFlags returned by bestIndex() and stored in
** WhereLevel.wsFlags.  These flags determine which search
** strategies are appropriate.
**
** The least significant 12 bits is reserved as a mask for WO_ values above.
** The WhereLevel.wsFlags field is usually set to WO_IN|WO_EQ|WO_ISNULL.
** But if the table is the right table of a left join, WhereLevel.wsFlags
** is set to WO_IN|WO_EQ.  The WhereLevel.wsFlags field can then be used as
** the "op" parameter to findTerm when we are resolving equality constraints.
** ISNULL constraints will then not be used on the right table of a left
** join.  Tickets #2177 and #2189.
*/
#define WHERE_ROWID_EQ     0x00001000  /* rowid=EXPR or rowid IN (...) */
#define WHERE_ROWID_RANGE  0x00002000  /* rowid<EXPR and/or rowid>EXPR */
#define WHERE_COLUMN_EQ    0x00010000  /* x=EXPR or x IN (...) or x IS NULL */
#define WHERE_COLUMN_RANGE 0x00020000  /* x<EXPR and/or x>EXPR */
#define WHERE_COLUMN_IN    0x00040000  /* x IN (...) */
#define WHERE_COLUMN_NULL  0x00080000  /* x IS NULL */
#define WHERE_INDEXED      0x000f0000  /* Anything that uses an index */
#define WHERE_IN_ABLE      0x000f1000  /* Able to support an IN operator */
#define WHERE_TOP_LIMIT    0x00100000  /* x<EXPR or x<=EXPR constraint */
#define WHERE_BTM_LIMIT    0x00200000  /* x>EXPR or x>=EXPR constraint */
#define WHERE_IDX_ONLY     0x00800000  /* Use index only - omit table */
#define WHERE_ORDERBY      0x01000000  /* Output will appear in correct order */
#define WHERE_REVERSE      0x02000000  /* Scan in reverse order */
#define WHERE_UNIQUE       0x04000000  /* Selects no more than one row */
#define WHERE_VIRTUALTABLE 0x08000000  /* Use virtual-table processing */
#define WHERE_MULTI_OR     0x10000000  /* OR using multiple indices */

/*
** Initialize a preallocated WhereClause structure.
*/
static void whereClauseInit(
  WhereClause *pWC,        /* The WhereClause to be initialized */
  Parse *pParse,           /* The parsing context */
  WhereMaskSet *pMaskSet   /* Mapping from table cursor numbers to bitmasks */
){
  pWC->pParse = pParse;
  pWC->pMaskSet = pMaskSet;
  pWC->nTerm = 0;
  pWC->nSlot = ArraySize(pWC->aStatic);
  pWC->a = pWC->aStatic;
}

/* Forward reference */
static void whereClauseClear(WhereClause*);

/*
** Deallocate all memory associated with a WhereOrInfo object.
*/
static void whereOrInfoDelete(sqlite3 *db, WhereOrInfo *p){
  whereClauseClear(&p->wc);
  sqlite3DbFree(db, p);
}

/*
** Deallocate all memory associated with a WhereAndInfo object.
*/
static void whereAndInfoDelete(sqlite3 *db, WhereAndInfo *p){
  whereClauseClear(&p->wc);
  sqlite3DbFree(db, p);
}

/*
** Deallocate a WhereClause structure.  The WhereClause structure
** itself is not freed.  This routine is the inverse of whereClauseInit().
*/
static void whereClauseClear(WhereClause *pWC){
  int i;
  WhereTerm *a;
  sqlite3 *db = pWC->pParse->db;
  for(i=pWC->nTerm-1, a=pWC->a; i>=0; i--, a++){
    if( a->wtFlags & TERM_DYNAMIC ){
      sqlite3ExprDelete(db, a->pExpr);
    }
    if( a->wtFlags & TERM_ORINFO ){
      whereOrInfoDelete(db, a->u.pOrInfo);
    }else if( a->wtFlags & TERM_ANDINFO ){
      whereAndInfoDelete(db, a->u.pAndInfo);
    }
  }
  if( pWC->a!=pWC->aStatic ){
    sqlite3DbFree(db, pWC->a);
  }
}

/*
** Add a single new WhereTerm entry to the WhereClause object pWC.
** The new WhereTerm object is constructed from Expr p and with wtFlags.
** The index in pWC->a[] of the new WhereTerm is returned on success.
** 0 is returned if the new WhereTerm could not be added due to a memory
** allocation error.  The memory allocation failure will be recorded in
** the db->mallocFailed flag so that higher-level functions can detect it.
**
** This routine will increase the size of the pWC->a[] array as necessary.
**
** If the wtFlags argument includes TERM_DYNAMIC, then responsibility
** for freeing the expression p is assumed by the WhereClause object pWC.
** This is true even if this routine fails to allocate a new WhereTerm.
**
** WARNING:  This routine might reallocate the space used to store
** WhereTerms.  All pointers to WhereTerms should be invalidated after
** calling this routine.  Such pointers may be reinitialized by referencing
** the pWC->a[] array.
*/
static int whereClauseInsert(WhereClause *pWC, Expr *p, u8 wtFlags){
  WhereTerm *pTerm;
  int idx;
  if( pWC->nTerm>=pWC->nSlot ){
    WhereTerm *pOld = pWC->a;
    sqlite3 *db = pWC->pParse->db;
    pWC->a = sqlite3DbMallocRaw(db, sizeof(pWC->a[0])*pWC->nSlot*2 );
    if( pWC->a==0 ){
      if( wtFlags & TERM_DYNAMIC ){
        sqlite3ExprDelete(db, p);
      }
      pWC->a = pOld;
      return 0;
    }
    memcpy(pWC->a, pOld, sizeof(pWC->a[0])*pWC->nTerm);
    if( pOld!=pWC->aStatic ){
      sqlite3DbFree(db, pOld);
    }
    pWC->nSlot = sqlite3DbMallocSize(db, pWC->a)/sizeof(pWC->a[0]);
  }
  pTerm = &pWC->a[idx = pWC->nTerm++];
  pTerm->pExpr = p;
  pTerm->wtFlags = wtFlags;
  pTerm->pWC = pWC;
  pTerm->iParent = -1;
  return idx;
}

/*
** This routine identifies subexpressions in the WHERE clause where
** each subexpression is separated by the AND operator or some other
** operator specified in the op parameter.  The WhereClause structure
** is filled with pointers to subexpressions.  For example:
**
**    WHERE  a=='hello' AND coalesce(b,11)<10 AND (c+12!=d OR c==22)
**           \________/     \_______________/     \________________/
**            slot[0]            slot[1]               slot[2]
**
** The original WHERE clause in pExpr is unaltered.  All this routine
** does is make slot[] entries point to substructure within pExpr.
**
** In the previous sentence and in the diagram, "slot[]" refers to
** the WhereClause.a[] array.  The slot[] array grows as needed to contain
** all terms of the WHERE clause.
*/
static void whereSplit(WhereClause *pWC, Expr *pExpr, int op){
  pWC->op = (u8)op;
  if( pExpr==0 ) return;
  if( pExpr->op!=op ){
    whereClauseInsert(pWC, pExpr, 0);
  }else{
    whereSplit(pWC, pExpr->pLeft, op);
    whereSplit(pWC, pExpr->pRight, op);
  }
}

/*
** Initialize an expression mask set (a WhereMaskSet object)
*/
#define initMaskSet(P)  memset(P, 0, sizeof(*P))

/*
** Return the bitmask for the given cursor number.  Return 0 if
** iCursor is not in the set.
*/
static Bitmask getMask(WhereMaskSet *pMaskSet, int iCursor){
  int i;
  for(i=0; i<pMaskSet->n; i++){
    if( pMaskSet->ix[i]==iCursor ){
      return ((Bitmask)1)<<i;
    }
  }
  return 0;
}

/*
** Create a new mask for cursor iCursor.
**
** There is one cursor per table in the FROM clause.  The number of
** tables in the FROM clause is limited by a test early in the
** sqlite3WhereBegin() routine.  So we know that the pMaskSet->ix[]
** array will never overflow.
*/
static void createMask(WhereMaskSet *pMaskSet, int iCursor){
  assert( pMaskSet->n < ArraySize(pMaskSet->ix) );
  pMaskSet->ix[pMaskSet->n++] = iCursor;
}

/*
** This routine walks (recursively) an expression tree and generates
** a bitmask indicating which tables are used in that expression
** tree.
**
** In order for this routine to work, the calling function must have
** previously invoked sqlite3ResolveExprNames() on the expression.  See
** the header comment on that routine for additional information.
** The sqlite3ResolveExprNames() routines looks for column names and
** sets their opcodes to TK_COLUMN and their Expr.iTable fields to
** the VDBE cursor number of the table.  This routine just has to
** translate the cursor numbers into bitmask values and OR all
** the bitmasks together.
*/
static Bitmask exprListTableUsage(WhereMaskSet*, ExprList*);
static Bitmask exprSelectTableUsage(WhereMaskSet*, Select*);
static Bitmask exprTableUsage(WhereMaskSet *pMaskSet, Expr *p){
  Bitmask mask = 0;
  if( p==0 ) return 0;
  if( p->op==TK_COLUMN ){
    mask = getMask(pMaskSet, p->iTable);
    return mask;
  }
  mask = exprTableUsage(pMaskSet, p->pRight);
  mask |= exprTableUsage(pMaskSet, p->pLeft);
  if( ExprHasProperty(p, EP_xIsSelect) ){
    mask |= exprSelectTableUsage(pMaskSet, p->x.pSelect);
  }else{
    mask |= exprListTableUsage(pMaskSet, p->x.pList);
  }
  return mask;
}
static Bitmask exprListTableUsage(WhereMaskSet *pMaskSet, ExprList *pList){
  int i;
  Bitmask mask = 0;
  if( pList ){
    for(i=0; i<pList->nExpr; i++){
      mask |= exprTableUsage(pMaskSet, pList->a[i].pExpr);
    }
  }
  return mask;
}
static Bitmask exprSelectTableUsage(WhereMaskSet *pMaskSet, Select *pS){
  Bitmask mask = 0;
  while( pS ){
    mask |= exprListTableUsage(pMaskSet, pS->pEList);
    mask |= exprListTableUsage(pMaskSet, pS->pGroupBy);
    mask |= exprListTableUsage(pMaskSet, pS->pOrderBy);
    mask |= exprTableUsage(pMaskSet, pS->pWhere);
    mask |= exprTableUsage(pMaskSet, pS->pHaving);
    pS = pS->pPrior;
  }
  return mask;
}

/*
** Return TRUE if the given operator is one of the operators that is
** allowed for an indexable WHERE clause term.  The allowed operators are
** "=", "<", ">", "<=", ">=", and "IN".
*/
static int allowedOp(int op){
  assert( TK_GT>TK_EQ && TK_GT<TK_GE );
  assert( TK_LT>TK_EQ && TK_LT<TK_GE );
  assert( TK_LE>TK_EQ && TK_LE<TK_GE );
  assert( TK_GE==TK_EQ+4 );
  return op==TK_IN || (op>=TK_EQ && op<=TK_GE) || op==TK_ISNULL;
}

/*
** Swap two objects of type TYPE.
*/
#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;}

/*
** Commute a comparison operator.  Expressions of the form "X op Y"
** are converted into "Y op X".
**
** If a collation sequence is associated with either the left or right
** side of the comparison, it remains associated with the same side after
** the commutation. So "Y collate NOCASE op X" becomes 
** "X collate NOCASE op Y". This is because any collation sequence on
** the left hand side of a comparison overrides any collation sequence 
** attached to the right. For the same reason the EP_ExpCollate flag
** is not commuted.
*/
static void exprCommute(Parse *pParse, Expr *pExpr){
  u16 expRight = (pExpr->pRight->flags & EP_ExpCollate);
  u16 expLeft = (pExpr->pLeft->flags & EP_ExpCollate);
  assert( allowedOp(pExpr->op) && pExpr->op!=TK_IN );
  pExpr->pRight->pColl = sqlite3ExprCollSeq(pParse, pExpr->pRight);
  pExpr->pLeft->pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft);
  SWAP(CollSeq*,pExpr->pRight->pColl,pExpr->pLeft->pColl);
  pExpr->pRight->flags = (pExpr->pRight->flags & ~EP_ExpCollate) | expLeft;
  pExpr->pLeft->flags = (pExpr->pLeft->flags & ~EP_ExpCollate) | expRight;
  SWAP(Expr*,pExpr->pRight,pExpr->pLeft);
  if( pExpr->op>=TK_GT ){
    assert( TK_LT==TK_GT+2 );
    assert( TK_GE==TK_LE+2 );
    assert( TK_GT>TK_EQ );
    assert( TK_GT<TK_LE );
    assert( pExpr->op>=TK_GT && pExpr->op<=TK_GE );
    pExpr->op = ((pExpr->op-TK_GT)^2)+TK_GT;
  }
}

/*
** Translate from TK_xx operator to WO_xx bitmask.
*/
static u16 operatorMask(int op){
  u16 c;
  assert( allowedOp(op) );
  if( op==TK_IN ){
    c = WO_IN;
  }else if( op==TK_ISNULL ){
    c = WO_ISNULL;
  }else{
    assert( (WO_EQ<<(op-TK_EQ)) < 0x7fff );
    c = (u16)(WO_EQ<<(op-TK_EQ));
  }
  assert( op!=TK_ISNULL || c==WO_ISNULL );
  assert( op!=TK_IN || c==WO_IN );
  assert( op!=TK_EQ || c==WO_EQ );
  assert( op!=TK_LT || c==WO_LT );
  assert( op!=TK_LE || c==WO_LE );
  assert( op!=TK_GT || c==WO_GT );
  assert( op!=TK_GE || c==WO_GE );
  return c;
}

/*
** Search for a term in the WHERE clause that is of the form "X <op> <expr>"
** where X is a reference to the iColumn of table iCur and <op> is one of
** the WO_xx operator codes specified by the op parameter.
** Return a pointer to the term.  Return 0 if not found.
*/
static WhereTerm *findTerm(
  WhereClause *pWC,     /* The WHERE clause to be searched */
  int iCur,             /* Cursor number of LHS */
  int iColumn,          /* Column number of LHS */
  Bitmask notReady,     /* RHS must not overlap with this mask */
  u32 op,               /* Mask of WO_xx values describing operator */
  Index *pIdx           /* Must be compatible with this index, if not NULL */
){
  WhereTerm *pTerm;
  int k;
  assert( iCur>=0 );
  op &= WO_ALL;
  for(pTerm=pWC->a, k=pWC->nTerm; k; k--, pTerm++){
    if( pTerm->leftCursor==iCur
       && (pTerm->prereqRight & notReady)==0
       && pTerm->u.leftColumn==iColumn
       && (pTerm->eOperator & op)!=0
    ){
      if( pIdx && pTerm->eOperator!=WO_ISNULL ){
        Expr *pX = pTerm->pExpr;
        CollSeq *pColl;
        char idxaff;
        int j;
        Parse *pParse = pWC->pParse;

        idxaff = pIdx->pTable->aCol[iColumn].affinity;
        if( !sqlite3IndexAffinityOk(pX, idxaff) ) continue;

        /* Figure out the collation sequence required from an index for
        ** it to be useful for optimising expression pX. Store this
        ** value in variable pColl.
        */
        assert(pX->pLeft);
        pColl = sqlite3BinaryCompareCollSeq(pParse, pX->pLeft, pX->pRight);
        assert(pColl || pParse->nErr);

        for(j=0; pIdx->aiColumn[j]!=iColumn; j++){
          if( NEVER(j>=pIdx->nColumn) ) return 0;
        }
        if( pColl && sqlite3StrICmp(pColl->zName, pIdx->azColl[j]) ) continue;
      }
      return pTerm;
    }
  }
  return 0;
}

/* Forward reference */
static void exprAnalyze(SrcList*, WhereClause*, int);

/*
** Call exprAnalyze on all terms in a WHERE clause.  
**
**
*/
static void exprAnalyzeAll(
  SrcList *pTabList,       /* the FROM clause */
  WhereClause *pWC         /* the WHERE clause to be analyzed */
){
  int i;
  for(i=pWC->nTerm-1; i>=0; i--){
    exprAnalyze(pTabList, pWC, i);
  }
}

#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION
/*
** Check to see if the given expression is a LIKE or GLOB operator that
** can be optimized using inequality constraints.  Return TRUE if it is
** so and false if not.
**
** In order for the operator to be optimizible, the RHS must be a string
** literal that does not begin with a wildcard.  
*/
static int isLikeOrGlob(
  Parse *pParse,    /* Parsing and code generating context */
  Expr *pExpr,      /* Test this expression */
  int *pnPattern,   /* Number of non-wildcard prefix characters */
  int *pisComplete, /* True if the only wildcard is % in the last character */
  int *pnoCase      /* True if uppercase is equivalent to lowercase */
){
  const char *z;             /* String on RHS of LIKE operator */
  Expr *pRight, *pLeft;      /* Right and left size of LIKE operator */
  ExprList *pList;           /* List of operands to the LIKE operator */
  int c;                     /* One character in z[] */
  int cnt;                   /* Number of non-wildcard prefix characters */
  char wc[3];                /* Wildcard characters */
  CollSeq *pColl;            /* Collating sequence for LHS */
  sqlite3 *db = pParse->db;  /* Database connection */

  if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, wc) ){
    return 0;
  }
#ifdef SQLITE_EBCDIC
  if( *pnoCase ) return 0;
#endif
  pList = pExpr->x.pList;
  pRight = pList->a[0].pExpr;
  if( pRight->op!=TK_STRING ){
    return 0;
  }
  pLeft = pList->a[1].pExpr;
  if( pLeft->op!=TK_COLUMN ){
    return 0;
  }
  pColl = sqlite3ExprCollSeq(pParse, pLeft);
  assert( pColl!=0 || pLeft->iColumn==-1 );
  if( pColl==0 ){
    /* No collation is defined for the ROWID.  Use the default. */
    pColl = db->pDfltColl;
  }
  if( (pColl->type!=SQLITE_COLL_BINARY || *pnoCase) &&
      (pColl->type!=SQLITE_COLL_NOCASE || !*pnoCase) ){
    return 0;
  }
  sqlite3DequoteExpr(pRight);
  z = (char *)pRight->token.z;
  cnt = 0;
  if( z ){
    while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){ cnt++; }
  }
  if( cnt==0 || 255==(u8)z[cnt-1] ){
    return 0;
  }
  *pisComplete = z[cnt]==wc[0] && z[cnt+1]==0;
  *pnPattern = cnt;
  return 1;
}
#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */


#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
** Check to see if the given expression is of the form
**
**         column MATCH expr
**
** If it is then return TRUE.  If not, return FALSE.
*/
static int isMatchOfColumn(
  Expr *pExpr      /* Test this expression */
){
  ExprList *pList;

  if( pExpr->op!=TK_FUNCTION ){
    return 0;
  }
  if( pExpr->token.n!=5 ||
       sqlite3StrNICmp((const char*)pExpr->token.z,"match",5)!=0 ){
    return 0;
  }
  pList = pExpr->x.pList;
  if( pList->nExpr!=2 ){
    return 0;
  }
  if( pList->a[1].pExpr->op != TK_COLUMN ){
    return 0;
  }
  return 1;
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */

/*
** If the pBase expression originated in the ON or USING clause of
** a join, then transfer the appropriate markings over to derived.
*/
static void transferJoinMarkings(Expr *pDerived, Expr *pBase){
  pDerived->flags |= pBase->flags & EP_FromJoin;
  pDerived->iRightJoinTable = pBase->iRightJoinTable;
}

#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY)
/*
** Analyze a term that consists of two or more OR-connected
** subterms.  So in:
**
**     ... WHERE  (a=5) AND (b=7 OR c=9 OR d=13) AND (d=13)
**                          ^^^^^^^^^^^^^^^^^^^^
**
** This routine analyzes terms such as the middle term in the above example.
** A WhereOrTerm object is computed and attached to the term under
** analysis, regardless of the outcome of the analysis.  Hence:
**
**     WhereTerm.wtFlags   |=  TERM_ORINFO
**     WhereTerm.u.pOrInfo  =  a dynamically allocated WhereOrTerm object
**
** The term being analyzed must have two or more of OR-connected subterms.
** A single subterm might be a set of AND-connected sub-subterms.
** Examples of terms under analysis:
**
**     (A)     t1.x=t2.y OR t1.x=t2.z OR t1.y=15 OR t1.z=t3.a+5
**     (B)     x=expr1 OR expr2=x OR x=expr3
**     (C)     t1.x=t2.y OR (t1.x=t2.z AND t1.y=15)
**     (D)     x=expr1 OR (y>11 AND y<22 AND z LIKE '*hello*')
**     (E)     (p.a=1 AND q.b=2 AND r.c=3) OR (p.x=4 AND q.y=5 AND r.z=6)
**
** CASE 1:
**
** If all subterms are of the form T.C=expr for some single column of C
** a single table T (as shown in example B above) then create a new virtual
** term that is an equivalent IN expression.  In other words, if the term
** being analyzed is:
**
**      x = expr1  OR  expr2 = x  OR  x = expr3
**
** then create a new virtual term like this:
**
**      x IN (expr1,expr2,expr3)
**
** CASE 2:
**
** If all subterms are indexable by a single table T, then set
**
**     WhereTerm.eOperator              =  WO_OR
**     WhereTerm.u.pOrInfo->indexable  |=  the cursor number for table T
**
** A subterm is "indexable" if it is of the form
** "T.C <op> <expr>" where C is any column of table T and 
** <op> is one of "=", "<", "<=", ">", ">=", "IS NULL", or "IN".
** A subterm is also indexable if it is an AND of two or more
** subsubterms at least one of which is indexable.  Indexable AND 
** subterms have their eOperator set to WO_AND and they have
** u.pAndInfo set to a dynamically allocated WhereAndTerm object.
**
** From another point of view, "indexable" means that the subterm could
** potentially be used with an index if an appropriate index exists.
** This analysis does not consider whether or not the index exists; that
** is something the bestIndex() routine will determine.  This analysis
** only looks at whether subterms appropriate for indexing exist.
**
** All examples A through E above all satisfy case 2.  But if a term
** also statisfies case 1 (such as B) we know that the optimizer will
** always prefer case 1, so in that case we pretend that case 2 is not
** satisfied.
**
** It might be the case that multiple tables are indexable.  For example,
** (E) above is indexable on tables P, Q, and R.
**
** Terms that satisfy case 2 are candidates for lookup by using
** separate indices to find rowids for each subterm and composing
** the union of all rowids using a RowSet object.  This is similar
** to "bitmap indices" in other database engines.
**
** OTHERWISE:
**
** If neither case 1 nor case 2 apply, then leave the eOperator set to
** zero.  This term is not useful for search.
*/
static void exprAnalyzeOrTerm(
  SrcList *pSrc,            /* the FROM clause */
  WhereClause *pWC,         /* the complete WHERE clause */
  int idxTerm               /* Index of the OR-term to be analyzed */
){
  Parse *pParse = pWC->pParse;            /* Parser context */
  sqlite3 *db = pParse->db;               /* Database connection */
  WhereTerm *pTerm = &pWC->a[idxTerm];    /* The term to be analyzed */
  Expr *pExpr = pTerm->pExpr;             /* The expression of the term */
  WhereMaskSet *pMaskSet = pWC->pMaskSet; /* Table use masks */
  int i;                                  /* Loop counters */
  WhereClause *pOrWc;       /* Breakup of pTerm into subterms */
  WhereTerm *pOrTerm;       /* A Sub-term within the pOrWc */
  WhereOrInfo *pOrInfo;     /* Additional information associated with pTerm */
  Bitmask chngToIN;         /* Tables that might satisfy case 1 */
  Bitmask indexable;        /* Tables that are indexable, satisfying case 2 */

  /*
  ** Break the OR clause into its separate subterms.  The subterms are
  ** stored in a WhereClause structure containing within the WhereOrInfo
  ** object that is attached to the original OR clause term.
  */
  assert( (pTerm->wtFlags & (TERM_DYNAMIC|TERM_ORINFO|TERM_ANDINFO))==0 );
  assert( pExpr->op==TK_OR );
  pTerm->u.pOrInfo = pOrInfo = sqlite3DbMallocZero(db, sizeof(*pOrInfo));
  if( pOrInfo==0 ) return;
  pTerm->wtFlags |= TERM_ORINFO;
  pOrWc = &pOrInfo->wc;
  whereClauseInit(pOrWc, pWC->pParse, pMaskSet);
  whereSplit(pOrWc, pExpr, TK_OR);
  exprAnalyzeAll(pSrc, pOrWc);
  if( db->mallocFailed ) return;
  assert( pOrWc->nTerm>=2 );

  /*
  ** Compute the set of tables that might satisfy cases 1 or 2.
  */
  indexable = chngToIN = ~(Bitmask)0;
  for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0 && indexable; i--, pOrTerm++){
    if( (pOrTerm->eOperator & WO_SINGLE)==0 ){
      WhereAndInfo *pAndInfo;
      assert( pOrTerm->eOperator==0 );
      assert( (pOrTerm->wtFlags & (TERM_ANDINFO|TERM_ORINFO))==0 );
      chngToIN = 0;
      pAndInfo = sqlite3DbMallocRaw(db, sizeof(*pAndInfo));
      if( pAndInfo ){
        WhereClause *pAndWC;
        WhereTerm *pAndTerm;
        int j;
        Bitmask b = 0;
        pOrTerm->u.pAndInfo = pAndInfo;
        pOrTerm->wtFlags |= TERM_ANDINFO;
        pOrTerm->eOperator = WO_AND;
        pAndWC = &pAndInfo->wc;
        whereClauseInit(pAndWC, pWC->pParse, pMaskSet);
        whereSplit(pAndWC, pOrTerm->pExpr, TK_AND);
        exprAnalyzeAll(pSrc, pAndWC);
        testcase( db->mallocFailed );
        if( !db->mallocFailed ){
          for(j=0, pAndTerm=pAndWC->a; j<pAndWC->nTerm; j++, pAndTerm++){
            assert( pAndTerm->pExpr );
            if( allowedOp(pAndTerm->pExpr->op) ){
              b |= getMask(pMaskSet, pAndTerm->leftCursor);
            }
          }
        }
        indexable &= b;
      }
    }else if( pOrTerm->wtFlags & TERM_COPIED ){
      /* Skip this term for now.  We revisit it when we process the
      ** corresponding TERM_VIRTUAL term */
    }else{
      Bitmask b;
      b = getMask(pMaskSet, pOrTerm->leftCursor);
      if( pOrTerm->wtFlags & TERM_VIRTUAL ){
        WhereTerm *pOther = &pOrWc->a[pOrTerm->iParent];
        b |= getMask(pMaskSet, pOther->leftCursor);
      }
      indexable &= b;
      if( pOrTerm->eOperator!=WO_EQ ){
        chngToIN = 0;
      }else{
        chngToIN &= b;
      }
    }
  }

  /*
  ** Record the set of tables that satisfy case 2.  The set might be
  ** empty.
  */
  pOrInfo->indexable = indexable;
  pTerm->eOperator = indexable==0 ? 0 : WO_OR;

  /*
  ** chngToIN holds a set of tables that *might* satisfy case 1.  But
  ** we have to do some additional checking to see if case 1 really
  ** is satisfied.
  */
  if( chngToIN ){
    int okToChngToIN = 0;     /* True if the conversion to IN is valid */
    int iColumn = -1;         /* Column index on lhs of IN operator */
    int iCursor = -1;         /* Table cursor common to all terms */
    int j = 0;                /* Loop counter */

    /* Search for a table and column that appears on one side or the
    ** other of the == operator in every subterm.  That table and column
    ** will be recorded in iCursor and iColumn.  There might not be any
    ** such table and column.  Set okToChngToIN if an appropriate table
    ** and column is found but leave okToChngToIN false if not found.
    */
    for(j=0; j<2 && !okToChngToIN; j++){
      pOrTerm = pOrWc->a;
      for(i=pOrWc->nTerm-1; i>=0; i--, pOrTerm++){
        assert( pOrTerm->eOperator==WO_EQ );
        pOrTerm->wtFlags &= ~TERM_OR_OK;
        if( pOrTerm->leftCursor==iColumn ) continue;
        if( (chngToIN & getMask(pMaskSet, pOrTerm->leftCursor))==0 ) continue;
        iColumn = pOrTerm->u.leftColumn;
        iCursor = pOrTerm->leftCursor;
        break;
      }
      if( i<0 ){
        assert( j==1 );
        assert( (chngToIN&(chngToIN-1))==0 );
        assert( chngToIN==getMask(pMaskSet, iColumn) );
        break;
      }
      okToChngToIN = 1;
      for(; i>=0 && okToChngToIN; i--, pOrTerm++){
        assert( pOrTerm->eOperator==WO_EQ );
        if( pOrTerm->leftCursor!=iCursor ){
          pOrTerm->wtFlags &= ~TERM_OR_OK;
        }else if( pOrTerm->u.leftColumn!=iColumn ){
          okToChngToIN = 0;
        }else{
          int affLeft, affRight;
          /* If the right-hand side is also a column, then the affinities
          ** of both right and left sides must be such that no type
          ** conversions are required on the right.  (Ticket #2249)
          */
          affRight = sqlite3ExprAffinity(pOrTerm->pExpr->pRight);
          affLeft = sqlite3ExprAffinity(pOrTerm->pExpr->pLeft);
          if( affRight!=0 && affRight!=affLeft ){
            okToChngToIN = 0;
          }else{
            pOrTerm->wtFlags |= TERM_OR_OK;
          }
        }
      }
    }

    /* At this point, okToChngToIN is true if original pTerm satisfies
    ** case 1.  In that case, construct a new virtual term that is 
    ** pTerm converted into an IN operator.
    */
    if( okToChngToIN ){
      Expr *pDup;            /* A transient duplicate expression */
      ExprList *pList = 0;   /* The RHS of the IN operator */
      Expr *pLeft = 0;       /* The LHS of the IN operator */
      Expr *pNew;            /* The complete IN operator */

      for(i=pOrWc->nTerm-1, pOrTerm=pOrWc->a; i>=0; i--, pOrTerm++){
        if( (pOrTerm->wtFlags & TERM_OR_OK)==0 ) continue;
        assert( pOrTerm->eOperator==WO_EQ );
        assert( pOrTerm->leftCursor==iCursor );
        assert( pOrTerm->u.leftColumn==iColumn );
        pDup = sqlite3ExprDup(db, pOrTerm->pExpr->pRight, 0);
        pList = sqlite3ExprListAppend(pWC->pParse, pList, pDup, 0);
        pLeft = pOrTerm->pExpr->pLeft;
      }
      assert( pLeft!=0 );
      pDup = sqlite3ExprDup(db, pLeft, 0);
      pNew = sqlite3Expr(db, TK_IN, pDup, 0, 0);
      if( pNew ){
        int idxNew;
        transferJoinMarkings(pNew, pExpr);
        assert( !ExprHasProperty(pNew, EP_xIsSelect) );
        pNew->x.pList = pList;
        idxNew = whereClauseInsert(pWC, pNew, TERM_VIRTUAL|TERM_DYNAMIC);
        testcase( idxNew==0 );
        exprAnalyze(pSrc, pWC, idxNew);
        pTerm = &pWC->a[idxTerm];
        pWC->a[idxNew].iParent = idxTerm;
        pTerm->nChild = 1;
      }else{
        sqlite3ExprListDelete(db, pList);
      }
      pTerm->eOperator = 0;  /* case 1 trumps case 2 */
    }
  }
}
#endif /* !SQLITE_OMIT_OR_OPTIMIZATION && !SQLITE_OMIT_SUBQUERY */


/*
** The input to this routine is an WhereTerm structure with only the
** "pExpr" field filled in.  The job of this routine is to analyze the
** subexpression and populate all the other fields of the WhereTerm
** structure.
**
** If the expression is of the form "<expr> <op> X" it gets commuted
** to the standard form of "X <op> <expr>".
**
** If the expression is of the form "X <op> Y" where both X and Y are
** columns, then the original expression is unchanged and a new virtual
** term of the form "Y <op> X" is added to the WHERE clause and
** analyzed separately.  The original term is marked with TERM_COPIED
** and the new term is marked with TERM_DYNAMIC (because it's pExpr
** needs to be freed with the WhereClause) and TERM_VIRTUAL (because it
** is a commuted copy of a prior term.)  The original term has nChild=1
** and the copy has idxParent set to the index of the original term.
*/
static void exprAnalyze(
  SrcList *pSrc,            /* the FROM clause */
  WhereClause *pWC,         /* the WHERE clause */
  int idxTerm               /* Index of the term to be analyzed */
){
  WhereTerm *pTerm;                /* The term to be analyzed */
  WhereMaskSet *pMaskSet;          /* Set of table index masks */
  Expr *pExpr;                     /* The expression to be analyzed */
  Bitmask prereqLeft;              /* Prerequesites of the pExpr->pLeft */
  Bitmask prereqAll;               /* Prerequesites of pExpr */
  Bitmask extraRight = 0;
  int nPattern;
  int isComplete;
  int noCase;
  int op;                          /* Top-level operator.  pExpr->op */
  Parse *pParse = pWC->pParse;     /* Parsing context */
  sqlite3 *db = pParse->db;        /* Database connection */

  if( db->mallocFailed ){
    return;
  }
  pTerm = &pWC->a[idxTerm];
  pMaskSet = pWC->pMaskSet;
  pExpr = pTerm->pExpr;
  prereqLeft = exprTableUsage(pMaskSet, pExpr->pLeft);
  op = pExpr->op;
  if( op==TK_IN ){
    assert( pExpr->pRight==0 );
    if( ExprHasProperty(pExpr, EP_xIsSelect) ){
      pTerm->prereqRight = exprSelectTableUsage(pMaskSet, pExpr->x.pSelect);
    }else{
      pTerm->prereqRight = exprListTableUsage(pMaskSet, pExpr->x.pList);
    }
  }else if( op==TK_ISNULL ){
    pTerm->prereqRight = 0;
  }else{
    pTerm->prereqRight = exprTableUsage(pMaskSet, pExpr->pRight);
  }
  prereqAll = exprTableUsage(pMaskSet, pExpr);
  if( ExprHasProperty(pExpr, EP_FromJoin) ){
    Bitmask x = getMask(pMaskSet, pExpr->iRightJoinTable);
    prereqAll |= x;
    extraRight = x-1;  /* ON clause terms may not be used with an index
                       ** on left table of a LEFT JOIN.  Ticket #3015 */
  }
  pTerm->prereqAll = prereqAll;
  pTerm->leftCursor = -1;
  pTerm->iParent = -1;
  pTerm->eOperator = 0;
  if( allowedOp(op) && (pTerm->prereqRight & prereqLeft)==0 ){
    Expr *pLeft = pExpr->pLeft;
    Expr *pRight = pExpr->pRight;
    if( pLeft->op==TK_COLUMN ){
      pTerm->leftCursor = pLeft->iTable;
      pTerm->u.leftColumn = pLeft->iColumn;
      pTerm->eOperator = operatorMask(op);
    }
    if( pRight && pRight->op==TK_COLUMN ){
      WhereTerm *pNew;
      Expr *pDup;
      if( pTerm->leftCursor>=0 ){
        int idxNew;
        pDup = sqlite3ExprDup(db, pExpr, 0);
        if( db->mallocFailed ){
          sqlite3ExprDelete(db, pDup);
          return;
        }
        idxNew = whereClauseInsert(pWC, pDup, TERM_VIRTUAL|TERM_DYNAMIC);
        if( idxNew==0 ) return;
        pNew = &pWC->a[idxNew];
        pNew->iParent = idxTerm;
        pTerm = &pWC->a[idxTerm];
        pTerm->nChild = 1;
        pTerm->wtFlags |= TERM_COPIED;
      }else{
        pDup = pExpr;
        pNew = pTerm;
      }
      exprCommute(pParse, pDup);
      pLeft = pDup->pLeft;
      pNew->leftCursor = pLeft->iTable;
      pNew->u.leftColumn = pLeft->iColumn;
      pNew->prereqRight = prereqLeft;
      pNew->prereqAll = prereqAll;
      pNew->eOperator = operatorMask(pDup->op);
    }
  }

#ifndef SQLITE_OMIT_BETWEEN_OPTIMIZATION
  /* If a term is the BETWEEN operator, create two new virtual terms
  ** that define the range that the BETWEEN implements.  For example:
  **
  **      a BETWEEN b AND c
  **
  ** is converted into:
  **
  **      (a BETWEEN b AND c) AND (a>=b) AND (a<=c)
  **
  ** The two new terms are added onto the end of the WhereClause object.
  ** The new terms are "dynamic" and are children of the original BETWEEN
  ** term.  That means that if the BETWEEN term is coded, the children are
  ** skipped.  Or, if the children are satisfied by an index, the original
  ** BETWEEN term is skipped.
  */
  else if( pExpr->op==TK_BETWEEN && pWC->op==TK_AND ){
    ExprList *pList = pExpr->x.pList;
    int i;
    static const u8 ops[] = {TK_GE, TK_LE};
    assert( pList!=0 );
    assert( pList->nExpr==2 );
    for(i=0; i<2; i++){
      Expr *pNewExpr;
      int idxNew;
      pNewExpr = sqlite3Expr(db, ops[i], sqlite3ExprDup(db, pExpr->pLeft, 0),
                             sqlite3ExprDup(db, pList->a[i].pExpr, 0), 0);
      idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC);
      testcase( idxNew==0 );
      exprAnalyze(pSrc, pWC, idxNew);
      pTerm = &pWC->a[idxTerm];
      pWC->a[idxNew].iParent = idxTerm;
    }
    pTerm->nChild = 2;
  }
#endif /* SQLITE_OMIT_BETWEEN_OPTIMIZATION */

#if !defined(SQLITE_OMIT_OR_OPTIMIZATION) && !defined(SQLITE_OMIT_SUBQUERY)
  /* Analyze a term that is composed of two or more subterms connected by
  ** an OR operator.
  */
  else if( pExpr->op==TK_OR ){
    assert( pWC->op==TK_AND );
    exprAnalyzeOrTerm(pSrc, pWC, idxTerm);
  }
#endif /* SQLITE_OMIT_OR_OPTIMIZATION */

#ifndef SQLITE_OMIT_LIKE_OPTIMIZATION
  /* Add constraints to reduce the search space on a LIKE or GLOB
  ** operator.
  **
  ** A like pattern of the form "x LIKE 'abc%'" is changed into constraints
  **
  **          x>='abc' AND x<'abd' AND x LIKE 'abc%'
  **
  ** The last character of the prefix "abc" is incremented to form the
  ** termination condition "abd".
  */
  if( isLikeOrGlob(pParse, pExpr, &nPattern, &isComplete, &noCase)
         && pWC->op==TK_AND ){
    Expr *pLeft, *pRight;
    Expr *pStr1, *pStr2;
    Expr *pNewExpr1, *pNewExpr2;
    int idxNew1, idxNew2;

    pLeft = pExpr->x.pList->a[1].pExpr;
    pRight = pExpr->x.pList->a[0].pExpr;
    pStr1 = sqlite3PExpr(pParse, TK_STRING, 0, 0, 0);
    if( pStr1 ){
      sqlite3TokenCopy(db, &pStr1->token, &pRight->token);
      pStr1->token.n = nPattern;
      pStr1->flags = EP_Dequoted;
    }
    pStr2 = sqlite3ExprDup(db, pStr1, 0);
    if( !db->mallocFailed ){
      u8 c, *pC;
      /* assert( pStr2->token.dyn ); */
      pC = (u8*)&pStr2->token.z[nPattern-1];
      c = *pC;
      if( noCase ){
        if( c=='@' ) isComplete = 0;
        c = sqlite3UpperToLower[c];
      }
      *pC = c + 1;
    }
    pNewExpr1 = sqlite3PExpr(pParse, TK_GE, sqlite3ExprDup(db,pLeft,0),pStr1,0);
    idxNew1 = whereClauseInsert(pWC, pNewExpr1, TERM_VIRTUAL|TERM_DYNAMIC);
    testcase( idxNew1==0 );
    exprAnalyze(pSrc, pWC, idxNew1);
    pNewExpr2 = sqlite3PExpr(pParse, TK_LT, sqlite3ExprDup(db,pLeft,0),pStr2,0);
    idxNew2 = whereClauseInsert(pWC, pNewExpr2, TERM_VIRTUAL|TERM_DYNAMIC);
    testcase( idxNew2==0 );
    exprAnalyze(pSrc, pWC, idxNew2);
    pTerm = &pWC->a[idxTerm];
    if( isComplete ){
      pWC->a[idxNew1].iParent = idxTerm;
      pWC->a[idxNew2].iParent = idxTerm;
      pTerm->nChild = 2;
    }
  }
#endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */

#ifndef SQLITE_OMIT_VIRTUALTABLE
  /* Add a WO_MATCH auxiliary term to the constraint set if the
  ** current expression is of the form:  column MATCH expr.
  ** This information is used by the xBestIndex methods of
  ** virtual tables.  The native query optimizer does not attempt
  ** to do anything with MATCH functions.
  */
  if( isMatchOfColumn(pExpr) ){
    int idxNew;
    Expr *pRight, *pLeft;
    WhereTerm *pNewTerm;
    Bitmask prereqColumn, prereqExpr;

    pRight = pExpr->x.pList->a[0].pExpr;
    pLeft = pExpr->x.pList->a[1].pExpr;
    prereqExpr = exprTableUsage(pMaskSet, pRight);
    prereqColumn = exprTableUsage(pMaskSet, pLeft);
    if( (prereqExpr & prereqColumn)==0 ){
      Expr *pNewExpr;
      pNewExpr = sqlite3Expr(db, TK_MATCH, 0, sqlite3ExprDup(db, pRight, 0), 0);
      idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC);
      testcase( idxNew==0 );
      pNewTerm = &pWC->a[idxNew];
      pNewTerm->prereqRight = prereqExpr;
      pNewTerm->leftCursor = pLeft->iTable;
      pNewTerm->u.leftColumn = pLeft->iColumn;
      pNewTerm->eOperator = WO_MATCH;
      pNewTerm->iParent = idxTerm;
      pTerm = &pWC->a[idxTerm];
      pTerm->nChild = 1;
      pTerm->wtFlags |= TERM_COPIED;
      pNewTerm->prereqAll = pTerm->prereqAll;
    }
  }
#endif /* SQLITE_OMIT_VIRTUALTABLE */

  /* Prevent ON clause terms of a LEFT JOIN from being used to drive
  ** an index for tables to the left of the join.
  */
  pTerm->prereqRight |= extraRight;
}

/*
** Return TRUE if any of the expressions in pList->a[iFirst...] contain
** a reference to any table other than the iBase table.
*/
static int referencesOtherTables(
  ExprList *pList,          /* Search expressions in ths list */
  WhereMaskSet *pMaskSet,   /* Mapping from tables to bitmaps */
  int iFirst,               /* Be searching with the iFirst-th expression */
  int iBase                 /* Ignore references to this table */
){
  Bitmask allowed = ~getMask(pMaskSet, iBase);
  while( iFirst<pList->nExpr ){
    if( (exprTableUsage(pMaskSet, pList->a[iFirst++].pExpr)&allowed)!=0 ){
      return 1;
    }
  }
  return 0;
}


/*
** This routine decides if pIdx can be used to satisfy the ORDER BY
** clause.  If it can, it returns 1.  If pIdx cannot satisfy the
** ORDER BY clause, this routine returns 0.
**
** pOrderBy is an ORDER BY clause from a SELECT statement.  pTab is the
** left-most table in the FROM clause of that same SELECT statement and
** the table has a cursor number of "base".  pIdx is an index on pTab.
**
** nEqCol is the number of columns of pIdx that are used as equality
** constraints.  Any of these columns may be missing from the ORDER BY
** clause and the match can still be a success.
**
** All terms of the ORDER BY that match against the index must be either
** ASC or DESC.  (Terms of the ORDER BY clause past the end of a UNIQUE
** index do not need to satisfy this constraint.)  The *pbRev value is
** set to 1 if the ORDER BY clause is all DESC and it is set to 0 if
** the ORDER BY clause is all ASC.
*/
static int isSortingIndex(
  Parse *pParse,          /* Parsing context */
  WhereMaskSet *pMaskSet, /* Mapping from table cursor numbers to bitmaps */
  Index *pIdx,            /* The index we are testing */
  int base,               /* Cursor number for the table to be sorted */
  ExprList *pOrderBy,     /* The ORDER BY clause */
  int nEqCol,             /* Number of index columns with == constraints */
  int *pbRev              /* Set to 1 if ORDER BY is DESC */
){
  int i, j;                       /* Loop counters */
  int sortOrder = 0;              /* XOR of index and ORDER BY sort direction */
  int nTerm;                      /* Number of ORDER BY terms */
  struct ExprList_item *pTerm;    /* A term of the ORDER BY clause */
  sqlite3 *db = pParse->db;

  assert( pOrderBy!=0 );
  nTerm = pOrderBy->nExpr;
  assert( nTerm>0 );

  /* Match terms of the ORDER BY clause against columns of
  ** the index.
  **
  ** Note that indices have pIdx->nColumn regular columns plus
  ** one additional column containing the rowid.  The rowid column
  ** of the index is also allowed to match against the ORDER BY
  ** clause.
  */
  for(i=j=0, pTerm=pOrderBy->a; j<nTerm && i<=pIdx->nColumn; i++){
    Expr *pExpr;       /* The expression of the ORDER BY pTerm */
    CollSeq *pColl;    /* The collating sequence of pExpr */
    int termSortOrder; /* Sort order for this term */
    int iColumn;       /* The i-th column of the index.  -1 for rowid */
    int iSortOrder;    /* 1 for DESC, 0 for ASC on the i-th index term */
    const char *zColl; /* Name of the collating sequence for i-th index term */

    pExpr = pTerm->pExpr;
    if( pExpr->op!=TK_COLUMN || pExpr->iTable!=base ){
      /* Can not use an index sort on anything that is not a column in the
      ** left-most table of the FROM clause */
      break;
    }
    pColl = sqlite3ExprCollSeq(pParse, pExpr);
    if( !pColl ){
      pColl = db->pDfltColl;
    }
    if( i<pIdx->nColumn ){
      iColumn = pIdx->aiColumn[i];
      if( iColumn==pIdx->pTable->iPKey ){
        iColumn = -1;
      }
      iSortOrder = pIdx->aSortOrder[i];
      zColl = pIdx->azColl[i];
    }else{
      iColumn = -1;
      iSortOrder = 0;
      zColl = pColl->zName;
    }
    if( pExpr->iColumn!=iColumn || sqlite3StrICmp(pColl->zName, zColl) ){
      /* Term j of the ORDER BY clause does not match column i of the index */
      if( i<nEqCol ){
        /* If an index column that is constrained by == fails to match an
        ** ORDER BY term, that is OK.  Just ignore that column of the index
        */
        continue;
      }else if( i==pIdx->nColumn ){
        /* Index column i is the rowid.  All other terms match. */
        break;
      }else{
        /* If an index column fails to match and is not constrained by ==
        ** then the index cannot satisfy the ORDER BY constraint.
        */
        return 0;
      }
    }
    assert( pIdx->aSortOrder!=0 );
    assert( pTerm->sortOrder==0 || pTerm->sortOrder==1 );
    assert( iSortOrder==0 || iSortOrder==1 );
    termSortOrder = iSortOrder ^ pTerm->sortOrder;
    if( i>nEqCol ){
      if( termSortOrder!=sortOrder ){
        /* Indices can only be used if all ORDER BY terms past the
        ** equality constraints are all either DESC or ASC. */
        return 0;
      }
    }else{
      sortOrder = termSortOrder;
    }
    j++;
    pTerm++;
    if( iColumn<0 && !referencesOtherTables(pOrderBy, pMaskSet, j, base) ){
      /* If the indexed column is the primary key and everything matches
      ** so far and none of the ORDER BY terms to the right reference other
      ** tables in the join, then we are assured that the index can be used 
      ** to sort because the primary key is unique and so none of the other
      ** columns will make any difference
      */
      j = nTerm;
    }
  }

  *pbRev = sortOrder!=0;
  if( j>=nTerm ){
    /* All terms of the ORDER BY clause are covered by this index so
    ** this index can be used for sorting. */
    return 1;
  }
  if( pIdx->onError!=OE_None && i==pIdx->nColumn
      && !referencesOtherTables(pOrderBy, pMaskSet, j, base) ){
    /* All terms of this index match some prefix of the ORDER BY clause
    ** and the index is UNIQUE and no terms on the tail of the ORDER BY
    ** clause reference other tables in a join.  If this is all true then
    ** the order by clause is superfluous. */
    return 1;
  }
  return 0;
}

/*
** Check table to see if the ORDER BY clause in pOrderBy can be satisfied
** by sorting in order of ROWID.  Return true if so and set *pbRev to be
** true for reverse ROWID and false for forward ROWID order.
*/
static int sortableByRowid(
  int base,               /* Cursor number for table to be sorted */
  ExprList *pOrderBy,     /* The ORDER BY clause */
  WhereMaskSet *pMaskSet, /* Mapping from table cursors to bitmaps */
  int *pbRev              /* Set to 1 if ORDER BY is DESC */
){
  Expr *p;

  assert( pOrderBy!=0 );
  assert( pOrderBy->nExpr>0 );
  p = pOrderBy->a[0].pExpr;
  if( p->op==TK_COLUMN && p->iTable==base && p->iColumn==-1
    && !referencesOtherTables(pOrderBy, pMaskSet, 1, base) ){
    *pbRev = pOrderBy->a[0].sortOrder;
    return 1;
  }
  return 0;
}

/*
** Prepare a crude estimate of the logarithm of the input value.
** The results need not be exact.  This is only used for estimating
** the total cost of performing operations with O(logN) or O(NlogN)
** complexity.  Because N is just a guess, it is no great tragedy if
** logN is a little off.
*/
static double estLog(double N){
  double logN = 1;
  double x = 10;
  while( N>x ){
    logN += 1;
    x *= 10;
  }
  return logN;
}

/*
** Two routines for printing the content of an sqlite3_index_info
** structure.  Used for testing and debugging only.  If neither
** SQLITE_TEST or SQLITE_DEBUG are defined, then these routines
** are no-ops.
*/
#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_DEBUG)
static void TRACE_IDX_INPUTS(sqlite3_index_info *p){
  int i;
  if( !sqlite3WhereTrace ) return;
  for(i=0; i<p->nConstraint; i++){
    sqlite3DebugPrintf("  constraint[%d]: col=%d termid=%d op=%d usabled=%d\n",
       i,
       p->aConstraint[i].iColumn,
       p->aConstraint[i].iTermOffset,
       p->aConstraint[i].op,
       p->aConstraint[i].usable);
  }
  for(i=0; i<p->nOrderBy; i++){
    sqlite3DebugPrintf("  orderby[%d]: col=%d desc=%d\n",
       i,
       p->aOrderBy[i].iColumn,
       p->aOrderBy[i].desc);
  }
}
static void TRACE_IDX_OUTPUTS(sqlite3_index_info *p){
  int i;
  if( !sqlite3WhereTrace ) return;
  for(i=0; i<p->nConstraint; i++){
    sqlite3DebugPrintf("  usage[%d]: argvIdx=%d omit=%d\n",
       i,
       p->aConstraintUsage[i].argvIndex,
       p->aConstraintUsage[i].omit);
  }
  sqlite3DebugPrintf("  idxNum=%d\n", p->idxNum);
  sqlite3DebugPrintf("  idxStr=%s\n", p->idxStr);
  sqlite3DebugPrintf("  orderByConsumed=%d\n", p->orderByConsumed);
  sqlite3DebugPrintf("  estimatedCost=%g\n", p->estimatedCost);
}
#else
#define TRACE_IDX_INPUTS(A)
#define TRACE_IDX_OUTPUTS(A)
#endif

/* 
** Required because bestIndex() is called by bestOrClauseIndex() 
*/
static void bestIndex(
    Parse*, WhereClause*, struct SrcList_item*, Bitmask, ExprList*, WhereCost*);

/*
** This routine attempts to find an scanning strategy that can be used 
** to optimize an 'OR' expression that is part of a WHERE clause. 
**
** The table associated with FROM clause term pSrc may be either a
** regular B-Tree table or a virtual table.
*/
static void bestOrClauseIndex(
  Parse *pParse,              /* The parsing context */
  WhereClause *pWC,           /* The WHERE clause */
  struct SrcList_item *pSrc,  /* The FROM clause term to search */
  Bitmask notReady,           /* Mask of cursors that are not available */
  ExprList *pOrderBy,         /* The ORDER BY clause */
  WhereCost *pCost            /* Lowest cost query plan */
){
#ifndef SQLITE_OMIT_OR_OPTIMIZATION
  const int iCur = pSrc->iCursor;   /* The cursor of the table to be accessed */
  const Bitmask maskSrc = getMask(pWC->pMaskSet, iCur);  /* Bitmask for pSrc */
  WhereTerm * const pWCEnd = &pWC->a[pWC->nTerm];        /* End of pWC->a[] */
  WhereTerm *pTerm;                 /* A single term of the WHERE clause */

  /* Search the WHERE clause terms for a usable WO_OR term. */
  for(pTerm=pWC->a; pTerm<pWCEnd; pTerm++){
    if( pTerm->eOperator==WO_OR 
     && ((pTerm->prereqAll & ~maskSrc) & notReady)==0
     && (pTerm->u.pOrInfo->indexable & maskSrc)!=0 
    ){
      WhereClause * const pOrWC = &pTerm->u.pOrInfo->wc;
      WhereTerm * const pOrWCEnd = &pOrWC->a[pOrWC->nTerm];
      WhereTerm *pOrTerm;
      int flags = WHERE_MULTI_OR;
      double rTotal = 0;
      double nRow = 0;

      for(pOrTerm=pOrWC->a; pOrTerm<pOrWCEnd; pOrTerm++){
        WhereCost sTermCost;
        WHERETRACE(("... Multi-index OR testing for term %d of %d....\n", 
          (pOrTerm - pOrWC->a), (pTerm - pWC->a)
        ));
        if( pOrTerm->eOperator==WO_AND ){
          WhereClause *pAndWC = &pOrTerm->u.pAndInfo->wc;
          bestIndex(pParse, pAndWC, pSrc, notReady, 0, &sTermCost);
        }else if( pOrTerm->leftCursor==iCur ){
          WhereClause tempWC;
          tempWC.pParse = pWC->pParse;
          tempWC.pMaskSet = pWC->pMaskSet;
          tempWC.op = TK_AND;
          tempWC.a = pOrTerm;
          tempWC.nTerm = 1;
          bestIndex(pParse, &tempWC, pSrc, notReady, 0, &sTermCost);
        }else{
          continue;
        }
        rTotal += sTermCost.rCost;
        nRow += sTermCost.nRow;
        if( rTotal>=pCost->rCost ) break;
      }

      /* If there is an ORDER BY clause, increase the scan cost to account 
      ** for the cost of the sort. */
      if( pOrderBy!=0 ){
        rTotal += nRow*estLog(nRow);
        WHERETRACE(("... sorting increases OR cost to %.9g\n", rTotal));
      }

      /* If the cost of scanning using this OR term for optimization is
      ** less than the current cost stored in pCost, replace the contents
      ** of pCost. */
      WHERETRACE(("... multi-index OR cost=%.9g nrow=%.9g\n", rTotal, nRow));
      if( rTotal<pCost->rCost ){
        pCost->rCost = rTotal;
        pCost->nRow = nRow;
        pCost->plan.wsFlags = flags;
        pCost->plan.u.pTerm = pTerm;
      }
    }
  }
#endif /* SQLITE_OMIT_OR_OPTIMIZATION */
}

#ifndef SQLITE_OMIT_VIRTUALTABLE
/*
** Allocate and populate an sqlite3_index_info structure. It is the 
** responsibility of the caller to eventually release the structure
** by passing the pointer returned by this function to sqlite3_free().
*/
static sqlite3_index_info *allocateIndexInfo(
  Parse *pParse, 
  WhereClause *pWC,
  struct SrcList_item *pSrc,
  ExprList *pOrderBy
){
  int i, j;
  int nTerm;
  struct sqlite3_index_constraint *pIdxCons;
  struct sqlite3_index_orderby *pIdxOrderBy;
  struct sqlite3_index_constraint_usage *pUsage;
  WhereTerm *pTerm;
  int nOrderBy;
  sqlite3_index_info *pIdxInfo;

  WHERETRACE(("Recomputing index info for %s...\n", pSrc->pTab->zName));

  /* Count the number of possible WHERE clause constraints referring
  ** to this virtual table */
  for(i=nTerm=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){
    if( pTerm->leftCursor != pSrc->iCursor ) continue;
    assert( (pTerm->eOperator&(pTerm->eOperator-1))==0 );
    testcase( pTerm->eOperator==WO_IN );
    testcase( pTerm->eOperator==WO_ISNULL );
    if( pTerm->eOperator & (WO_IN|WO_ISNULL) ) continue;
    nTerm++;
  }

  /* If the ORDER BY clause contains only columns in the current 
  ** virtual table then allocate space for the aOrderBy part of
  ** the sqlite3_index_info structure.
  */
  nOrderBy = 0;
  if( pOrderBy ){
    for(i=0; i<pOrderBy->nExpr; i++){
      Expr *pExpr = pOrderBy->a[i].pExpr;
      if( pExpr->op!=TK_COLUMN || pExpr->iTable!=pSrc->iCursor ) break;
    }
    if( i==pOrderBy->nExpr ){
      nOrderBy = pOrderBy->nExpr;
    }
  }

  /* Allocate the sqlite3_index_info structure
  */
  pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo)
                           + (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm
                           + sizeof(*pIdxOrderBy)*nOrderBy );
  if( pIdxInfo==0 ){
    sqlite3ErrorMsg(pParse, "out of memory");
    /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */
    return 0;
  }

  /* Initialize the structure.  The sqlite3_index_info structure contains
  ** many fields that are declared "const" to prevent xBestIndex from
  ** changing them.  We have to do some funky casting in order to
  ** initialize those fields.
  */
  pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1];
  pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm];
  pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy];
  *(int*)&pIdxInfo->nConstraint = nTerm;
  *(int*)&pIdxInfo->nOrderBy = nOrderBy;
  *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint = pIdxCons;
  *(struct sqlite3_index_orderby**)&pIdxInfo->aOrderBy = pIdxOrderBy;
  *(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage =
                                                                   pUsage;

  for(i=j=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){
    if( pTerm->leftCursor != pSrc->iCursor ) continue;
    assert( (pTerm->eOperator&(pTerm->eOperator-1))==0 );
    testcase( pTerm->eOperator==WO_IN );
    testcase( pTerm->eOperator==WO_ISNULL );
    if( pTerm->eOperator & (WO_IN|WO_ISNULL) ) continue;
    pIdxCons[j].iColumn = pTerm->u.leftColumn;
    pIdxCons[j].iTermOffset = i;
    pIdxCons[j].op = (u8)pTerm->eOperator;
    /* The direct assignment in the previous line is possible only because
    ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical.  The
    ** following asserts verify this fact. */
    assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ );
    assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT );
    assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE );
    assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT );
    assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE );
    assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH );
    assert( pTerm->eOperator & (WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) );
    j++;
  }
  for(i=0; i<nOrderBy; i++){
    Expr *pExpr = pOrderBy->a[i].pExpr;
    pIdxOrderBy[i].iColumn = pExpr->iColumn;
    pIdxOrderBy[i].desc = pOrderBy->a[i].sortOrder;
  }

  return pIdxInfo;
}

/*
** The table object reference passed as the second argument to this function
** must represent a virtual table. This function invokes the xBestIndex()
** method of the virtual table with the sqlite3_index_info pointer passed
** as the argument.
**
** If an error occurs, pParse is populated with an error message and a
** non-zero value is returned. Otherwise, 0 is returned and the output
** part of the sqlite3_index_info structure is left populated.
**
** Whether or not an error is returned, it is the responsibility of the
** caller to eventually free p->idxStr if p->needToFreeIdxStr indicates
** that this is required.
*/
static int vtabBestIndex(Parse *pParse, Table *pTab, sqlite3_index_info *p){
  sqlite3_vtab *pVtab = pTab->pVtab;
  int i;
  int rc;

  (void)sqlite3SafetyOff(pParse->db);
  WHERETRACE(("xBestIndex for %s\n", pTab->zName));
  TRACE_IDX_INPUTS(p);
  rc = pVtab->pModule->xBestIndex(pVtab, p);
  TRACE_IDX_OUTPUTS(p);
  (void)sqlite3SafetyOn(pParse->db);

  if( rc!=SQLITE_OK ){
    if( rc==SQLITE_NOMEM ){
      pParse->db->mallocFailed = 1;
    }else if( !pVtab->zErrMsg ){
      sqlite3ErrorMsg(pParse, "%s", sqlite3ErrStr(rc));
    }else{
      sqlite3ErrorMsg(pParse, "%s", pVtab->zErrMsg);
    }
  }
  sqlite3DbFree(pParse->db, pVtab->zErrMsg);
  pVtab->zErrMsg = 0;

  for(i=0; i<p->nConstraint; i++){
    if( !p->aConstraint[i].usable && p->aConstraintUsage[i].argvIndex>0 ){
      sqlite3ErrorMsg(pParse, 
          "table %s: xBestIndex returned an invalid plan", pTab->zName);
    }
  }

  return pParse->nErr;
}


/*
** Compute the best index for a virtual table.
**
** The best index is computed by the xBestIndex method of the virtual
** table module.  This routine is really just a wrapper that sets up
** the sqlite3_index_info structure that is used to communicate with
** xBestIndex.
**
** In a join, this routine might be called multiple times for the
** same virtual table.  The sqlite3_index_info structure is created
** and initialized on the first invocation and reused on all subsequent
** invocations.  The sqlite3_index_info structure is also used when
** code is generated to access the virtual table.  The whereInfoDelete() 
** routine takes care of freeing the sqlite3_index_info structure after
** everybody has finished with it.
*/
static void bestVirtualIndex(
  Parse *pParse,                  /* The parsing context */
  WhereClause *pWC,               /* The WHERE clause */
  struct SrcList_item *pSrc,      /* The FROM clause term to search */
  Bitmask notReady,               /* Mask of cursors that are not available */
  ExprList *pOrderBy,             /* The order by clause */
  WhereCost *pCost,               /* Lowest cost query plan */
  sqlite3_index_info **ppIdxInfo  /* Index information passed to xBestIndex */
){
  Table *pTab = pSrc->pTab;
  sqlite3_index_info *pIdxInfo;
  struct sqlite3_index_constraint *pIdxCons;
  struct sqlite3_index_constraint_usage *pUsage;
  WhereTerm *pTerm;
  int i, j;
  int nOrderBy;

  /* Make sure wsFlags is initialized to some sane value. Otherwise, if the 
  ** malloc in allocateIndexInfo() fails and this function returns leaving
  ** wsFlags in an uninitialized state, the caller may behave unpredictably.
  */
  pCost->plan.wsFlags = WHERE_VIRTUALTABLE;

  /* If the sqlite3_index_info structure has not been previously
  ** allocated and initialized, then allocate and initialize it now.
  */
  pIdxInfo = *ppIdxInfo;
  if( pIdxInfo==0 ){
    *ppIdxInfo = pIdxInfo = allocateIndexInfo(pParse, pWC, pSrc, pOrderBy);
  }
  if( pIdxInfo==0 ){
    return;
  }

  /* At this point, the sqlite3_index_info structure that pIdxInfo points
  ** to will have been initialized, either during the current invocation or
  ** during some prior invocation.  Now we just have to customize the
  ** details of pIdxInfo for the current invocation and pass it to
  ** xBestIndex.
  */

  /* The module name must be defined. Also, by this point there must
  ** be a pointer to an sqlite3_vtab structure. Otherwise
  ** sqlite3ViewGetColumnNames() would have picked up the error. 
  */
  assert( pTab->azModuleArg && pTab->azModuleArg[0] );
  assert( pTab->pVtab );

  /* Set the aConstraint[].usable fields and initialize all 
  ** output variables to zero.
  **
  ** aConstraint[].usable is true for constraints where the right-hand
  ** side contains only references to tables to the left of the current
  ** table.  In other words, if the constraint is of the form:
  **
  **           column = expr
  **
  ** and we are evaluating a join, then the constraint on column is 
  ** only valid if all tables referenced in expr occur to the left
  ** of the table containing column.
  **
  ** The aConstraints[] array contains entries for all constraints
  ** on the current table.  That way we only have to compute it once
  ** even though we might try to pick the best index multiple times.
  ** For each attempt at picking an index, the order of tables in the
  ** join might be different so we have to recompute the usable flag
  ** each time.
  */
  pIdxCons = *(struct sqlite3_index_constraint**)&pIdxInfo->aConstraint;
  pUsage = pIdxInfo->aConstraintUsage;
  for(i=0; i<pIdxInfo->nConstraint; i++, pIdxCons++){
    j = pIdxCons->iTermOffset;
    pTerm = &pWC->a[j];
    pIdxCons->usable =  (pTerm->prereqRight & notReady)==0 ?1:0;
  }
  memset(pUsage, 0, sizeof(pUsage[0])*pIdxInfo->nConstraint);
  if( pIdxInfo->needToFreeIdxStr ){
    sqlite3_free(pIdxInfo->idxStr);
  }
  pIdxInfo->idxStr = 0;
  pIdxInfo->idxNum = 0;
  pIdxInfo->needToFreeIdxStr = 0;
  pIdxInfo->orderByConsumed = 0;
  /* ((double)2) In case of SQLITE_OMIT_FLOATING_POINT... */
  pIdxInfo->estimatedCost = SQLITE_BIG_DBL / ((double)2);
  nOrderBy = pIdxInfo->nOrderBy;
  if( !pOrderBy ){
    pIdxInfo->nOrderBy = 0;
  }

  if( vtabBestIndex(pParse, pTab, pIdxInfo) ){
    return;
  }

  /* The cost is not allowed to be larger than SQLITE_BIG_DBL (the
  ** inital value of lowestCost in this loop. If it is, then the
  ** (cost<lowestCost) test below will never be true.
  ** 
  ** Use "(double)2" instead of "2.0" in case OMIT_FLOATING_POINT 
  ** is defined.
  */
  if( (SQLITE_BIG_DBL/((double)2))<pIdxInfo->estimatedCost ){
    pCost->rCost = (SQLITE_BIG_DBL/((double)2));
  }else{
    pCost->rCost = pIdxInfo->estimatedCost;
  }
  pCost->plan.u.pVtabIdx = pIdxInfo;
  if( pIdxInfo && pIdxInfo->orderByConsumed ){
    pCost->plan.wsFlags |= WHERE_ORDERBY;
  }
  pCost->plan.nEq = 0;
  pIdxInfo->nOrderBy = nOrderBy;

  /* Try to find a more efficient access pattern by using multiple indexes
  ** to optimize an OR expression within the WHERE clause. 
  */
  bestOrClauseIndex(pParse, pWC, pSrc, notReady, pOrderBy, pCost);
}
#endif /* SQLITE_OMIT_VIRTUALTABLE */

/*
** Find the query plan for accessing a particular table.  Write the
** best query plan and its cost into the WhereCost object supplied as the
** last parameter.
**
** The lowest cost plan wins.  The cost is an estimate of the amount of
** CPU and disk I/O need to process the request using the selected plan.
** Factors that influence cost include:
**
**    *  The estimated number of rows that will be retrieved.  (The
**       fewer the better.)
**
**    *  Whether or not sorting must occur.
**
**    *  Whether or not there must be separate lookups in the
**       index and in the main table.
**
** If there was an INDEXED BY clause (pSrc->pIndex) attached to the table in
** the SQL statement, then this function only considers plans using the 
** named index. If no such plan is found, then the returned cost is
** SQLITE_BIG_DBL. If a plan is found that uses the named index, 
** then the cost is calculated in the usual way.
**
** If a NOT INDEXED clause (pSrc->notIndexed!=0) was attached to the table 
** in the SELECT statement, then no indexes are considered. However, the 
** selected plan may still take advantage of the tables built-in rowid
** index.
*/
static void bestBtreeIndex(
  Parse *pParse,              /* The parsing context */
  WhereClause *pWC,           /* The WHERE clause */
  struct SrcList_item *pSrc,  /* The FROM clause term to search */
  Bitmask notReady,           /* Mask of cursors that are not available */
  ExprList *pOrderBy,         /* The ORDER BY clause */
  WhereCost *pCost            /* Lowest cost query plan */
){
  WhereTerm *pTerm;           /* A single term of the WHERE clause */
  int iCur = pSrc->iCursor;   /* The cursor of the table to be accessed */
  Index *pProbe;              /* An index we are evaluating */
  int rev;                    /* True to scan in reverse order */
  int wsFlags;                /* Flags associated with pProbe */
  int nEq;                    /* Number of == or IN constraints */
  int eqTermMask;             /* Mask of valid equality operators */
  double cost;                /* Cost of using pProbe */
  double nRow;                /* Estimated number of rows in result set */
  int i;                      /* Loop counter */

  WHERETRACE(("bestIndex: tbl=%s notReady=%llx\n", pSrc->pTab->zName,notReady));
  pProbe = pSrc->pTab->pIndex;
  if( pSrc->notIndexed ){
    pProbe = 0;
  }

  /* If the table has no indices and there are no terms in the where
  ** clause that refer to the ROWID, then we will never be able to do
  ** anything other than a full table scan on this table.  We might as
  ** well put it first in the join order.  That way, perhaps it can be
  ** referenced by other tables in the join.
  */
  memset(pCost, 0, sizeof(*pCost));
  if( pProbe==0 &&
     findTerm(pWC, iCur, -1, 0, WO_EQ|WO_IN|WO_LT|WO_LE|WO_GT|WO_GE,0)==0 &&
     (pOrderBy==0 || !sortableByRowid(iCur, pOrderBy, pWC->pMaskSet, &rev)) ){
     if( pParse->db->flags & SQLITE_ReverseOrder ){
      /* For application testing, randomly reverse the output order for
      ** SELECT statements that omit the ORDER BY clause.  This will help
      ** to find cases where
      */
      pCost->plan.wsFlags |= WHERE_REVERSE;
    }
    return;
  }
  pCost->rCost = SQLITE_BIG_DBL;

  /* Check for a rowid=EXPR or rowid IN (...) constraints. If there was
  ** an INDEXED BY clause attached to this table, skip this step.
  */
  if( !pSrc->pIndex ){
    pTerm = findTerm(pWC, iCur, -1, notReady, WO_EQ|WO_IN, 0);
    if( pTerm ){
      Expr *pExpr;
      pCost->plan.wsFlags = WHERE_ROWID_EQ;
      if( pTerm->eOperator & WO_EQ ){
        /* Rowid== is always the best pick.  Look no further.  Because only
        ** a single row is generated, output is always in sorted order */
        pCost->plan.wsFlags = WHERE_ROWID_EQ | WHERE_UNIQUE;
        pCost->plan.nEq = 1;
        WHERETRACE(("... best is rowid\n"));
        pCost->rCost = 0;
        pCost->nRow = 1;
        return;
      }else if( !ExprHasProperty((pExpr = pTerm->pExpr), EP_xIsSelect) 
             && pExpr->x.pList 
      ){
        /* Rowid IN (LIST): cost is NlogN where N is the number of list
        ** elements.  */
        pCost->rCost = pCost->nRow = pExpr->x.pList->nExpr;
        pCost->rCost *= estLog(pCost->rCost);
      }else{
        /* Rowid IN (SELECT): cost is NlogN where N is the number of rows
        ** in the result of the inner select.  We have no way to estimate
        ** that value so make a wild guess. */
        pCost->nRow = 100;
        pCost->rCost = 200;
      }
      WHERETRACE(("... rowid IN cost: %.9g\n", pCost->rCost));
    }
  
    /* Estimate the cost of a table scan.  If we do not know how many
    ** entries are in the table, use 1 million as a guess.
    */
    cost = pProbe ? pProbe->aiRowEst[0] : 1000000;
    WHERETRACE(("... table scan base cost: %.9g\n", cost));
    wsFlags = WHERE_ROWID_RANGE;
  
    /* Check for constraints on a range of rowids in a table scan.
    */
    pTerm = findTerm(pWC, iCur, -1, notReady, WO_LT|WO_LE|WO_GT|WO_GE, 0);
    if( pTerm ){
      if( findTerm(pWC, iCur, -1, notReady, WO_LT|WO_LE, 0) ){
        wsFlags |= WHERE_TOP_LIMIT;
        cost /= 3;  /* Guess that rowid<EXPR eliminates two-thirds of rows */
      }
      if( findTerm(pWC, iCur, -1, notReady, WO_GT|WO_GE, 0) ){
        wsFlags |= WHERE_BTM_LIMIT;
        cost /= 3;  /* Guess that rowid>EXPR eliminates two-thirds of rows */
      }
      WHERETRACE(("... rowid range reduces cost to %.9g\n", cost));
    }else{
      wsFlags = 0;
    }
    nRow = cost;
  
    /* If the table scan does not satisfy the ORDER BY clause, increase
    ** the cost by NlogN to cover the expense of sorting. */
    if( pOrderBy ){
      if( sortableByRowid(iCur, pOrderBy, pWC->pMaskSet, &rev) ){
        wsFlags |= WHERE_ORDERBY|WHERE_ROWID_RANGE;
        if( rev ){
          wsFlags |= WHERE_REVERSE;
        }
      }else{
        cost += cost*estLog(cost);
        WHERETRACE(("... sorting increases cost to %.9g\n", cost));
      }
    }else if( pParse->db->flags & SQLITE_ReverseOrder ){
      /* For application testing, randomly reverse the output order for
      ** SELECT statements that omit the ORDER BY clause.  This will help
      ** to find cases where
      */
      wsFlags |= WHERE_REVERSE;
    }

    /* Remember this case if it is the best so far */
    if( cost<pCost->rCost ){
      pCost->rCost = cost;
      pCost->nRow = nRow;
      pCost->plan.wsFlags = wsFlags;
    }
  }

  bestOrClauseIndex(pParse, pWC, pSrc, notReady, pOrderBy, pCost);

  /* If the pSrc table is the right table of a LEFT JOIN then we may not
  ** use an index to satisfy IS NULL constraints on that table.  This is
  ** because columns might end up being NULL if the table does not match -
  ** a circumstance which the index cannot help us discover.  Ticket #2177.
  */
  if( (pSrc->jointype & JT_LEFT)!=0 ){
    eqTermMask = WO_EQ|WO_IN;
  }else{
    eqTermMask = WO_EQ|WO_IN|WO_ISNULL;
  }

  /* Look at each index.
  */
  if( pSrc->pIndex ){
    pProbe = pSrc->pIndex;
  }
  for(; pProbe; pProbe=(pSrc->pIndex ? 0 : pProbe->pNext)){
    double inMultiplier = 1;  /* Number of equality look-ups needed */
    int inMultIsEst = 0;      /* True if inMultiplier is an estimate */

    WHERETRACE(("... index %s:\n", pProbe->zName));

    /* Count the number of columns in the index that are satisfied
    ** by x=EXPR or x IS NULL constraints or x IN (...) constraints.
    ** For a term of the form x=EXPR or x IS NULL we only have to do 
    ** a single binary search.  But for x IN (...) we have to do a
    ** number of binary searched
    ** equal to the number of entries on the RHS of the IN operator.
    ** The inMultipler variable with try to estimate the number of
    ** binary searches needed.
    */
    wsFlags = 0;
    for(i=0; i<pProbe->nColumn; i++){
      int j = pProbe->aiColumn[i];
      pTerm = findTerm(pWC, iCur, j, notReady, eqTermMask, pProbe);
      if( pTerm==0 ) break;
      wsFlags |= WHERE_COLUMN_EQ;
      if( pTerm->eOperator & WO_IN ){
        Expr *pExpr = pTerm->pExpr;
        wsFlags |= WHERE_COLUMN_IN;
        if( ExprHasProperty(pExpr, EP_xIsSelect) ){
          inMultiplier *= 25;
          inMultIsEst = 1;
        }else if( pExpr->x.pList ){
          inMultiplier *= pExpr->x.pList->nExpr + 1;
        }
      }else if( pTerm->eOperator & WO_ISNULL ){
        wsFlags |= WHERE_COLUMN_NULL;
      }
    }
    nRow = pProbe->aiRowEst[i] * inMultiplier;
    /* If inMultiplier is an estimate and that estimate results in an
    ** nRow it that is more than half number of rows in the table,
    ** then reduce inMultipler */
    if( inMultIsEst && nRow*2 > pProbe->aiRowEst[0] ){
      nRow = pProbe->aiRowEst[0]/2;
      inMultiplier = nRow/pProbe->aiRowEst[i];
    }
    cost = nRow + inMultiplier*estLog(pProbe->aiRowEst[0]);
    nEq = i;
    if( pProbe->onError!=OE_None && nEq==pProbe->nColumn ){
      testcase( wsFlags & WHERE_COLUMN_IN );
      testcase( wsFlags & WHERE_COLUMN_NULL );
      if( (wsFlags & (WHERE_COLUMN_IN|WHERE_COLUMN_NULL))==0 ){
        wsFlags |= WHERE_UNIQUE;
      }
    }
    WHERETRACE(("...... nEq=%d inMult=%.9g nRow=%.9g cost=%.9g\n",
                nEq, inMultiplier, nRow, cost));

    /* Look for range constraints.  Assume that each range constraint
    ** makes the search space 1/3rd smaller.
    */
    if( nEq<pProbe->nColumn ){
      int j = pProbe->aiColumn[nEq];
      pTerm = findTerm(pWC, iCur, j, notReady, WO_LT|WO_LE|WO_GT|WO_GE, pProbe);
      if( pTerm ){
        wsFlags |= WHERE_COLUMN_RANGE;
        if( findTerm(pWC, iCur, j, notReady, WO_LT|WO_LE, pProbe) ){
          wsFlags |= WHERE_TOP_LIMIT;
          cost /= 3;
          nRow /= 3;
        }
        if( findTerm(pWC, iCur, j, notReady, WO_GT|WO_GE, pProbe) ){
          wsFlags |= WHERE_BTM_LIMIT;
          cost /= 3;
          nRow /= 3;
        }
        WHERETRACE(("...... range reduces nRow to %.9g and cost to %.9g\n",
                    nRow, cost));
      }
    }

    /* Add the additional cost of sorting if that is a factor.
    */
    if( pOrderBy ){
      if( (wsFlags & (WHERE_COLUMN_IN|WHERE_COLUMN_NULL))==0
       && isSortingIndex(pParse,pWC->pMaskSet,pProbe,iCur,pOrderBy,nEq,&rev)
      ){
        if( wsFlags==0 ){
          wsFlags = WHERE_COLUMN_RANGE;
        }
        wsFlags |= WHERE_ORDERBY;
        if( rev ){
          wsFlags |= WHERE_REVERSE;
        }
      }else{
        cost += cost*estLog(cost);
        WHERETRACE(("...... orderby increases cost to %.9g\n", cost));
      }
    }else if( pParse->db->flags & SQLITE_ReverseOrder ){
      /* For application testing, randomly reverse the output order for
      ** SELECT statements that omit the ORDER BY clause.  This will help
      ** to find cases where
      */
      wsFlags |= WHERE_REVERSE;
    }

    /* Check to see if we can get away with using just the index without
    ** ever reading the table.  If that is the case, then halve the
    ** cost of this index.
    */
    if( wsFlags && pSrc->colUsed < (((Bitmask)1)<<(BMS-1)) ){
      Bitmask m = pSrc->colUsed;
      int j;
      for(j=0; j<pProbe->nColumn; j++){
        int x = pProbe->aiColumn[j];
        if( x<BMS-1 ){
          m &= ~(((Bitmask)1)<<x);
        }
      }
      if( m==0 ){
        wsFlags |= WHERE_IDX_ONLY;
        cost /= 2;
        WHERETRACE(("...... idx-only reduces cost to %.9g\n", cost));
      }
    }

    /* If this index has achieved the lowest cost so far, then use it.
    */
    if( wsFlags!=0 && cost < pCost->rCost ){
      pCost->rCost = cost;
      pCost->nRow = nRow;
      pCost->plan.wsFlags = wsFlags;
      pCost->plan.nEq = nEq;
      assert( pCost->plan.wsFlags & WHERE_INDEXED );
      pCost->plan.u.pIdx = pProbe;
    }
  }

  /* Report the best result
  */
  pCost->plan.wsFlags |= eqTermMask;
  WHERETRACE(("best index is %s, cost=%.9g, nrow=%.9g, wsFlags=%x, nEq=%d\n",
        (pCost->plan.wsFlags & WHERE_INDEXED)!=0 ?
             pCost->plan.u.pIdx->zName : "(none)", pCost->nRow,
        pCost->rCost, pCost->plan.wsFlags, pCost->plan.nEq));
}

/*
** Find the query plan for accessing table pSrc->pTab. Write the
** best query plan and its cost into the WhereCost object supplied 
** as the last parameter. This function may calculate the cost of
** both real and virtual table scans.
*/
static void bestIndex(
  Parse *pParse,              /* The parsing context */
  WhereClause *pWC,           /* The WHERE clause */
  struct SrcList_item *pSrc,  /* The FROM clause term to search */
  Bitmask notReady,           /* Mask of cursors that are not available */
  ExprList *pOrderBy,         /* The ORDER BY clause */
  WhereCost *pCost            /* Lowest cost query plan */
){
  if( IsVirtual(pSrc->pTab) ){
    sqlite3_index_info *p = 0;
    bestVirtualIndex(pParse, pWC, pSrc, notReady, pOrderBy, pCost, &p);
    if( p->needToFreeIdxStr ){
      sqlite3_free(p->idxStr);
    }
    sqlite3DbFree(pParse->db, p);
  }else{
    bestBtreeIndex(pParse, pWC, pSrc, notReady, pOrderBy, pCost);
  }
}

/*
** Disable a term in the WHERE clause.  Except, do not disable the term
** if it controls a LEFT OUTER JOIN and it did not originate in the ON
** or USING clause of that join.
**
** Consider the term t2.z='ok' in the following queries:
**
**   (1)  SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x WHERE t2.z='ok'
**   (2)  SELECT * FROM t1 LEFT JOIN t2 ON t1.a=t2.x AND t2.z='ok'
**   (3)  SELECT * FROM t1, t2 WHERE t1.a=t2.x AND t2.z='ok'
**
** The t2.z='ok' is disabled in the in (2) because it originates
** in the ON clause.  The term is disabled in (3) because it is not part
** of a LEFT OUTER JOIN.  In (1), the term is not disabled.
**
** Disabling a term causes that term to not be tested in the inner loop
** of the join.  Disabling is an optimization.  When terms are satisfied
** by indices, we disable them to prevent redundant tests in the inner
** loop.  We would get the correct results if nothing were ever disabled,
** but joins might run a little slower.  The trick is to disable as much
** as we can without disabling too much.  If we disabled in (1), we'd get
** the wrong answer.  See ticket #813.
*/
static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){
  if( pTerm
      && ALWAYS((pTerm->wtFlags & TERM_CODED)==0)
      && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin))
  ){
    pTerm->wtFlags |= TERM_CODED;
    if( pTerm->iParent>=0 ){
      WhereTerm *pOther = &pTerm->pWC->a[pTerm->iParent];
      if( (--pOther->nChild)==0 ){
        disableTerm(pLevel, pOther);
      }
    }
  }
}

/*
** Apply the affinities associated with the first n columns of index
** pIdx to the values in the n registers starting at base.
*/
static void codeApplyAffinity(Parse *pParse, int base, int n, Index *pIdx){
  if( n>0 ){
    Vdbe *v = pParse->pVdbe;
    assert( v!=0 );
    sqlite3VdbeAddOp2(v, OP_Affinity, base, n);
    sqlite3IndexAffinityStr(v, pIdx);
    sqlite3ExprCacheAffinityChange(pParse, base, n);
  }
}


/*
** Generate code for a single equality term of the WHERE clause.  An equality
** term can be either X=expr or X IN (...).   pTerm is the term to be 
** coded.
**
** The current value for the constraint is left in register iReg.
**
** For a constraint of the form X=expr, the expression is evaluated and its
** result is left on the stack.  For constraints of the form X IN (...)
** this routine sets up a loop that will iterate over all values of X.
*/
static int codeEqualityTerm(
  Parse *pParse,      /* The parsing context */
  WhereTerm *pTerm,   /* The term of the WHERE clause to be coded */
  WhereLevel *pLevel, /* When level of the FROM clause we are working on */
  int iTarget         /* Attempt to leave results in this register */
){
  Expr *pX = pTerm->pExpr;
  Vdbe *v = pParse->pVdbe;
  int iReg;                  /* Register holding results */

  assert( iTarget>0 );
  if( pX->op==TK_EQ ){
    iReg = sqlite3ExprCodeTarget(pParse, pX->pRight, iTarget);
  }else if( pX->op==TK_ISNULL ){
    iReg = iTarget;
    sqlite3VdbeAddOp2(v, OP_Null, 0, iReg);
#ifndef SQLITE_OMIT_SUBQUERY
  }else{
    int eType;
    int iTab;
    struct InLoop *pIn;

    assert( pX->op==TK_IN );
    iReg = iTarget;
    eType = sqlite3FindInIndex(pParse, pX, 0);
    iTab = pX->iTable;
    sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0);
    VdbeComment((v, "%.*s", pX->span.n, pX->span.z));
    assert( pLevel->plan.wsFlags & WHERE_IN_ABLE );
    if( pLevel->u.in.nIn==0 ){
      pLevel->addrNxt = sqlite3VdbeMakeLabel(v);
    }
    pLevel->u.in.nIn++;
    pLevel->u.in.aInLoop =
       sqlite3DbReallocOrFree(pParse->db, pLevel->u.in.aInLoop,
                              sizeof(pLevel->u.in.aInLoop[0])*pLevel->u.in.nIn);
    pIn = pLevel->u.in.aInLoop;
    if( pIn ){
      pIn += pLevel->u.in.nIn - 1;
      pIn->iCur = iTab;
      if( eType==IN_INDEX_ROWID ){
        pIn->addrInTop = sqlite3VdbeAddOp2(v, OP_Rowid, iTab, iReg);
      }else{
        pIn->addrInTop = sqlite3VdbeAddOp3(v, OP_Column, iTab, 0, iReg);
      }
      sqlite3VdbeAddOp1(v, OP_IsNull, iReg);
    }else{
      pLevel->u.in.nIn = 0;
    }
#endif
  }
  disableTerm(pLevel, pTerm);
  return iReg;
}

/*
** Generate code that will evaluate all == and IN constraints for an
** index.  The values for all constraints are left on the stack.
**
** For example, consider table t1(a,b,c,d,e,f) with index i1(a,b,c).
** Suppose the WHERE clause is this:  a==5 AND b IN (1,2,3) AND c>5 AND c<10
** The index has as many as three equality constraints, but in this
** example, the third "c" value is an inequality.  So only two 
** constraints are coded.  This routine will generate code to evaluate
** a==5 and b IN (1,2,3).  The current values for a and b will be stored
** in consecutive registers and the index of the first register is returned.
**
** In the example above nEq==2.  But this subroutine works for any value
** of nEq including 0.  If nEq==0, this routine is nearly a no-op.
** The only thing it does is allocate the pLevel->iMem memory cell.
**
** This routine always allocates at least one memory cell and returns
** the index of that memory cell. The code that
** calls this routine will use that memory cell to store the termination
** key value of the loop.  If one or more IN operators appear, then
** this routine allocates an additional nEq memory cells for internal
** use.
*/
static int codeAllEqualityTerms(
  Parse *pParse,        /* Parsing context */
  WhereLevel *pLevel,   /* Which nested loop of the FROM we are coding */
  WhereClause *pWC,     /* The WHERE clause */
  Bitmask notReady,     /* Which parts of FROM have not yet been coded */
  int nExtraReg         /* Number of extra registers to allocate */
){
  int nEq = pLevel->plan.nEq;   /* The number of == or IN constraints to code */
  Vdbe *v = pParse->pVdbe;      /* The vm under construction */
  Index *pIdx;                  /* The index being used for this loop */
  int iCur = pLevel->iTabCur;   /* The cursor of the table */
  WhereTerm *pTerm;             /* A single constraint term */
  int j;                        /* Loop counter */
  int regBase;                  /* Base register */
  int nReg;                     /* Number of registers to allocate */

  /* This module is only called on query plans that use an index. */
  assert( pLevel->plan.wsFlags & WHERE_INDEXED );
  pIdx = pLevel->plan.u.pIdx;

  /* Figure out how many memory cells we will need then allocate them.
  */
  regBase = pParse->nMem + 1;
  nReg = pLevel->plan.nEq + nExtraReg;
  pParse->nMem += nReg;

  /* Evaluate the equality constraints
  */
  assert( pIdx->nColumn>=nEq );
  for(j=0; j<nEq; j++){
    int r1;
    int k = pIdx->aiColumn[j];
    pTerm = findTerm(pWC, iCur, k, notReady, pLevel->plan.wsFlags, pIdx);
    if( NEVER(pTerm==0) ) break;
    assert( (pTerm->wtFlags & TERM_CODED)==0 );
    r1 = codeEqualityTerm(pParse, pTerm, pLevel, regBase+j);
    if( r1!=regBase+j ){
      if( nReg==1 ){
        sqlite3ReleaseTempReg(pParse, regBase);
        regBase = r1;
      }else{
        sqlite3VdbeAddOp2(v, OP_SCopy, r1, regBase+j);
      }
    }
    testcase( pTerm->eOperator & WO_ISNULL );
    testcase( pTerm->eOperator & WO_IN );
    if( (pTerm->eOperator & (WO_ISNULL|WO_IN))==0 ){
      sqlite3VdbeAddOp2(v, OP_IsNull, regBase+j, pLevel->addrBrk);
    }
  }
  return regBase;
}

/*
** Generate code for the start of the iLevel-th loop in the WHERE clause
** implementation described by pWInfo.
*/
static Bitmask codeOneLoopStart(
  WhereInfo *pWInfo,   /* Complete information about the WHERE clause */
  int iLevel,          /* Which level of pWInfo->a[] should be coded */
  u16 wctrlFlags,      /* One of the WHERE_* flags defined in sqliteInt.h */
  Bitmask notReady     /* Which tables are currently available */
){
  int j, k;            /* Loop counters */
  int iCur;            /* The VDBE cursor for the table */
  int addrNxt;         /* Where to jump to continue with the next IN case */
  int omitTable;       /* True if we use the index only */
  int bRev;            /* True if we need to scan in reverse order */
  WhereLevel *pLevel;  /* The where level to be coded */
  WhereClause *pWC;    /* Decomposition of the entire WHERE clause */
  WhereTerm *pTerm;               /* A WHERE clause term */
  Parse *pParse;                  /* Parsing context */
  Vdbe *v;                        /* The prepared stmt under constructions */
  struct SrcList_item *pTabItem;  /* FROM clause term being coded */
  int addrBrk;                    /* Jump here to break out of the loop */
  int addrCont;                   /* Jump here to continue with next cycle */
  int iRowidReg = 0;        /* Rowid is stored in this register, if not zero */
  int iReleaseReg = 0;      /* Temp register to free before returning */

  pParse = pWInfo->pParse;
  v = pParse->pVdbe;
  pWC = pWInfo->pWC;
  pLevel = &pWInfo->a[iLevel];
  pTabItem = &pWInfo->pTabList->a[pLevel->iFrom];
  iCur = pTabItem->iCursor;
  bRev = (pLevel->plan.wsFlags & WHERE_REVERSE)!=0;
  omitTable = (pLevel->plan.wsFlags & WHERE_IDX_ONLY)!=0 
           && (wctrlFlags & WHERE_FORCE_TABLE)==0;

  /* Create labels for the "break" and "continue" instructions
  ** for the current loop.  Jump to addrBrk to break out of a loop.
  ** Jump to cont to go immediately to the next iteration of the
  ** loop.
  **
  ** When there is an IN operator, we also have a "addrNxt" label that
  ** means to continue with the next IN value combination.  When
  ** there are no IN operators in the constraints, the "addrNxt" label
  ** is the same as "addrBrk".
  */
  addrBrk = pLevel->addrBrk = pLevel->addrNxt = sqlite3VdbeMakeLabel(v);
  addrCont = pLevel->addrCont = sqlite3VdbeMakeLabel(v);

  /* If this is the right table of a LEFT OUTER JOIN, allocate and
  ** initialize a memory cell that records if this table matches any
  ** row of the left table of the join.
  */
  if( pLevel->iFrom>0 && (pTabItem[0].jointype & JT_LEFT)!=0 ){
    pLevel->iLeftJoin = ++pParse->nMem;
    sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin);
    VdbeComment((v, "init LEFT JOIN no-match flag"));
  }

#ifndef SQLITE_OMIT_VIRTUALTABLE
  if(  (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
    /* Case 0:  The table is a virtual-table.  Use the VFilter and VNext
    **          to access the data.
    */
    int iReg;   /* P3 Value for OP_VFilter */
    sqlite3_index_info *pVtabIdx = pLevel->plan.u.pVtabIdx;
    int nConstraint = pVtabIdx->nConstraint;
    struct sqlite3_index_constraint_usage *aUsage =
                                                pVtabIdx->aConstraintUsage;
    const struct sqlite3_index_constraint *aConstraint =
                                                pVtabIdx->aConstraint;

    iReg = sqlite3GetTempRange(pParse, nConstraint+2);
    for(j=1; j<=nConstraint; j++){
      for(k=0; k<nConstraint; k++){
        if( aUsage[k].argvIndex==j ){
          int iTerm = aConstraint[k].iTermOffset;
          sqlite3ExprCode(pParse, pWC->a[iTerm].pExpr->pRight, iReg+j+1);
          break;
        }
      }
      if( k==nConstraint ) break;
    }
    sqlite3VdbeAddOp2(v, OP_Integer, pVtabIdx->idxNum, iReg);
    sqlite3VdbeAddOp2(v, OP_Integer, j-1, iReg+1);
    sqlite3VdbeAddOp4(v, OP_VFilter, iCur, addrBrk, iReg, pVtabIdx->idxStr,
                      pVtabIdx->needToFreeIdxStr ? P4_MPRINTF : P4_STATIC);
    pVtabIdx->needToFreeIdxStr = 0;
    for(j=0; j<nConstraint; j++){
      if( aUsage[j].omit ){
        int iTerm = aConstraint[j].iTermOffset;
        disableTerm(pLevel, &pWC->a[iTerm]);
      }
    }
    pLevel->op = OP_VNext;
    pLevel->p1 = iCur;
    pLevel->p2 = sqlite3VdbeCurrentAddr(v);
    sqlite3ReleaseTempRange(pParse, iReg, nConstraint+2);
  }else
#endif /* SQLITE_OMIT_VIRTUALTABLE */

  if( pLevel->plan.wsFlags & WHERE_ROWID_EQ ){
    /* Case 1:  We can directly reference a single row using an
    **          equality comparison against the ROWID field.  Or
    **          we reference multiple rows using a "rowid IN (...)"
    **          construct.
    */
    iReleaseReg = sqlite3GetTempReg(pParse);
    pTerm = findTerm(pWC, iCur, -1, notReady, WO_EQ|WO_IN, 0);
    assert( pTerm!=0 );
    assert( pTerm->pExpr!=0 );
    assert( pTerm->leftCursor==iCur );
    assert( omitTable==0 );
    iRowidReg = codeEqualityTerm(pParse, pTerm, pLevel, iReleaseReg);
    addrNxt = pLevel->addrNxt;
    sqlite3VdbeAddOp2(v, OP_MustBeInt, iRowidReg, addrNxt);
    sqlite3VdbeAddOp3(v, OP_NotExists, iCur, addrNxt, iRowidReg);
    sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
    VdbeComment((v, "pk"));
    pLevel->op = OP_Noop;
  }else if( pLevel->plan.wsFlags & WHERE_ROWID_RANGE ){
    /* Case 2:  We have an inequality comparison against the ROWID field.
    */
    int testOp = OP_Noop;
    int start;
    int memEndValue = 0;
    WhereTerm *pStart, *pEnd;

    assert( omitTable==0 );
    pStart = findTerm(pWC, iCur, -1, notReady, WO_GT|WO_GE, 0);
    pEnd = findTerm(pWC, iCur, -1, notReady, WO_LT|WO_LE, 0);
    if( bRev ){
      pTerm = pStart;
      pStart = pEnd;
      pEnd = pTerm;
    }
    if( pStart ){
      Expr *pX;             /* The expression that defines the start bound */
      int r1, rTemp;        /* Registers for holding the start boundary */

      /* The following constant maps TK_xx codes into corresponding 
      ** seek opcodes.  It depends on a particular ordering of TK_xx
      */
      const u8 aMoveOp[] = {
           /* TK_GT */  OP_SeekGt,
           /* TK_LE */  OP_SeekLe,
           /* TK_LT */  OP_SeekLt,
           /* TK_GE */  OP_SeekGe
      };
      assert( TK_LE==TK_GT+1 );      /* Make sure the ordering.. */
      assert( TK_LT==TK_GT+2 );      /*  ... of the TK_xx values... */
      assert( TK_GE==TK_GT+3 );      /*  ... is correcct. */

      pX = pStart->pExpr;
      assert( pX!=0 );
      assert( pStart->leftCursor==iCur );
      r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp);
      sqlite3VdbeAddOp3(v, aMoveOp[pX->op-TK_GT], iCur, addrBrk, r1);
      VdbeComment((v, "pk"));
      sqlite3ExprCacheAffinityChange(pParse, r1, 1);
      sqlite3ReleaseTempReg(pParse, rTemp);
      disableTerm(pLevel, pStart);
    }else{
      sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk);
    }
    if( pEnd ){
      Expr *pX;
      pX = pEnd->pExpr;
      assert( pX!=0 );
      assert( pEnd->leftCursor==iCur );
      memEndValue = ++pParse->nMem;
      sqlite3ExprCode(pParse, pX->pRight, memEndValue);
      if( pX->op==TK_LT || pX->op==TK_GT ){
        testOp = bRev ? OP_Le : OP_Ge;
      }else{
        testOp = bRev ? OP_Lt : OP_Gt;
      }
      disableTerm(pLevel, pEnd);
    }
    start = sqlite3VdbeCurrentAddr(v);
    pLevel->op = bRev ? OP_Prev : OP_Next;
    pLevel->p1 = iCur;
    pLevel->p2 = start;
    pLevel->p5 = (pStart==0 && pEnd==0) ?1:0;
    if( testOp!=OP_Noop ){
      iRowidReg = iReleaseReg = sqlite3GetTempReg(pParse);
      sqlite3VdbeAddOp2(v, OP_Rowid, iCur, iRowidReg);
      sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
      sqlite3VdbeAddOp3(v, testOp, memEndValue, addrBrk, iRowidReg);
      sqlite3VdbeChangeP5(v, SQLITE_AFF_NUMERIC | SQLITE_JUMPIFNULL);
    }
  }else if( pLevel->plan.wsFlags & (WHERE_COLUMN_RANGE|WHERE_COLUMN_EQ) ){
    /* Case 3: A scan using an index.
    **
    **         The WHERE clause may contain zero or more equality 
    **         terms ("==" or "IN" operators) that refer to the N
    **         left-most columns of the index. It may also contain
    **         inequality constraints (>, <, >= or <=) on the indexed
    **         column that immediately follows the N equalities. Only 
    **         the right-most column can be an inequality - the rest must
    **         use the "==" and "IN" operators. For example, if the 
    **         index is on (x,y,z), then the following clauses are all 
    **         optimized:
    **
    **            x=5
    **            x=5 AND y=10
    **            x=5 AND y<10
    **            x=5 AND y>5 AND y<10
    **            x=5 AND y=5 AND z<=10
    **
    **         The z<10 term of the following cannot be used, only
    **         the x=5 term:
    **
    **            x=5 AND z<10
    **
    **         N may be zero if there are inequality constraints.
    **         If there are no inequality constraints, then N is at
    **         least one.
    **
    **         This case is also used when there are no WHERE clause
    **         constraints but an index is selected anyway, in order
    **         to force the output order to conform to an ORDER BY.
    */  
    int aStartOp[] = {
      0,
      0,
      OP_Rewind,           /* 2: (!start_constraints && startEq &&  !bRev) */
      OP_Last,             /* 3: (!start_constraints && startEq &&   bRev) */
      OP_SeekGt,           /* 4: (start_constraints  && !startEq && !bRev) */
      OP_SeekLt,           /* 5: (start_constraints  && !startEq &&  bRev) */
      OP_SeekGe,           /* 6: (start_constraints  &&  startEq && !bRev) */
      OP_SeekLe            /* 7: (start_constraints  &&  startEq &&  bRev) */
    };
    int aEndOp[] = {
      OP_Noop,             /* 0: (!end_constraints) */
      OP_IdxGE,            /* 1: (end_constraints && !bRev) */
      OP_IdxLT             /* 2: (end_constraints && bRev) */
    };
    int nEq = pLevel->plan.nEq;
    int isMinQuery = 0;          /* If this is an optimized SELECT min(x).. */
    int regBase;                 /* Base register holding constraint values */
    int r1;                      /* Temp register */
    WhereTerm *pRangeStart = 0;  /* Inequality constraint at range start */
    WhereTerm *pRangeEnd = 0;    /* Inequality constraint at range end */
    int startEq;                 /* True if range start uses ==, >= or <= */
    int endEq;                   /* True if range end uses ==, >= or <= */
    int start_constraints;       /* Start of range is constrained */
    int nConstraint;             /* Number of constraint terms */
    Index *pIdx;         /* The index we will be using */
    int iIdxCur;         /* The VDBE cursor for the index */
    int nExtraReg = 0;   /* Number of extra registers needed */
    int op;              /* Instruction opcode */

    pIdx = pLevel->plan.u.pIdx;
    iIdxCur = pLevel->iIdxCur;
    k = pIdx->aiColumn[nEq];     /* Column for inequality constraints */

    /* If this loop satisfies a sort order (pOrderBy) request that 
    ** was passed to this function to implement a "SELECT min(x) ..." 
    ** query, then the caller will only allow the loop to run for
    ** a single iteration. This means that the first row returned
    ** should not have a NULL value stored in 'x'. If column 'x' is
    ** the first one after the nEq equality constraints in the index,
    ** this requires some special handling.
    */
    if( (wctrlFlags&WHERE_ORDERBY_MIN)!=0
     && (pLevel->plan.wsFlags&WHERE_ORDERBY)
     && (pIdx->nColumn>nEq)
    ){
      /* assert( pOrderBy->nExpr==1 ); */
      /* assert( pOrderBy->a[0].pExpr->iColumn==pIdx->aiColumn[nEq] ); */
      isMinQuery = 1;
      nExtraReg = 1;
    }

    /* Find any inequality constraint terms for the start and end 
    ** of the range. 
    */
    if( pLevel->plan.wsFlags & WHERE_TOP_LIMIT ){
      pRangeEnd = findTerm(pWC, iCur, k, notReady, (WO_LT|WO_LE), pIdx);
      nExtraReg = 1;
    }
    if( pLevel->plan.wsFlags & WHERE_BTM_LIMIT ){
      pRangeStart = findTerm(pWC, iCur, k, notReady, (WO_GT|WO_GE), pIdx);
      nExtraReg = 1;
    }

    /* Generate code to evaluate all constraint terms using == or IN
    ** and store the values of those terms in an array of registers
    ** starting at regBase.
    */
    regBase = codeAllEqualityTerms(pParse, pLevel, pWC, notReady, nExtraReg);
    addrNxt = pLevel->addrNxt;


    /* If we are doing a reverse order scan on an ascending index, or
    ** a forward order scan on a descending index, interchange the 
    ** start and end terms (pRangeStart and pRangeEnd).
    */
    if( bRev==(pIdx->aSortOrder[nEq]==SQLITE_SO_ASC) ){
      SWAP(WhereTerm *, pRangeEnd, pRangeStart);
    }

    testcase( pRangeStart && pRangeStart->eOperator & WO_LE );
    testcase( pRangeStart && pRangeStart->eOperator & WO_GE );
    testcase( pRangeEnd && pRangeEnd->eOperator & WO_LE );
    testcase( pRangeEnd && pRangeEnd->eOperator & WO_GE );
    startEq = !pRangeStart || pRangeStart->eOperator & (WO_LE|WO_GE);
    endEq =   !pRangeEnd || pRangeEnd->eOperator & (WO_LE|WO_GE);
    start_constraints = pRangeStart || nEq>0;

    /* Seek the index cursor to the start of the range. */
    nConstraint = nEq;
    if( pRangeStart ){
      sqlite3ExprCode(pParse, pRangeStart->pExpr->pRight, regBase+nEq);
      sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt);
      nConstraint++;
    }else if( isMinQuery ){
      sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq);
      nConstraint++;
      startEq = 0;
      start_constraints = 1;
    }
    codeApplyAffinity(pParse, regBase, nConstraint, pIdx);
    op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev];
    assert( op!=0 );
    testcase( op==OP_Rewind );
    testcase( op==OP_Last );
    testcase( op==OP_SeekGt );
    testcase( op==OP_SeekGe );
    testcase( op==OP_SeekLe );
    testcase( op==OP_SeekLt );
    sqlite3VdbeAddOp4(v, op, iIdxCur, addrNxt, regBase, 
                      SQLITE_INT_TO_PTR(nConstraint), P4_INT32);

    /* Load the value for the inequality constraint at the end of the
    ** range (if any).
    */
    nConstraint = nEq;
    if( pRangeEnd ){
      sqlite3ExprCacheRemove(pParse, regBase+nEq);
      sqlite3ExprCode(pParse, pRangeEnd->pExpr->pRight, regBase+nEq);
      sqlite3VdbeAddOp2(v, OP_IsNull, regBase+nEq, addrNxt);
      codeApplyAffinity(pParse, regBase, nEq+1, pIdx);
      nConstraint++;
    }

    /* Top of the loop body */
    pLevel->p2 = sqlite3VdbeCurrentAddr(v);

    /* Check if the index cursor is past the end of the range. */
    op = aEndOp[(pRangeEnd || nEq) * (1 + bRev)];
    testcase( op==OP_Noop );
    testcase( op==OP_IdxGE );
    testcase( op==OP_IdxLT );
    if( op!=OP_Noop ){
      sqlite3VdbeAddOp4(v, op, iIdxCur, addrNxt, regBase,
                        SQLITE_INT_TO_PTR(nConstraint), P4_INT32);
      sqlite3VdbeChangeP5(v, endEq!=bRev ?1:0);
    }

    /* If there are inequality constraints, check that the value
    ** of the table column that the inequality contrains is not NULL.
    ** If it is, jump to the next iteration of the loop.
    */
    r1 = sqlite3GetTempReg(pParse);
    testcase( pLevel->plan.wsFlags & WHERE_BTM_LIMIT );
    testcase( pLevel->plan.wsFlags & WHERE_TOP_LIMIT );
    if( pLevel->plan.wsFlags & (WHERE_BTM_LIMIT|WHERE_TOP_LIMIT) ){
      sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, nEq, r1);
      sqlite3VdbeAddOp2(v, OP_IsNull, r1, addrCont);
    }
    sqlite3ReleaseTempReg(pParse, r1);

    /* Seek the table cursor, if required */
    disableTerm(pLevel, pRangeStart);
    disableTerm(pLevel, pRangeEnd);
    if( !omitTable ){
      iRowidReg = iReleaseReg = sqlite3GetTempReg(pParse);
      sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg);
      sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg);
      sqlite3VdbeAddOp2(v, OP_Seek, iCur, iRowidReg);  /* Deferred seek */
    }

    /* Record the instruction used to terminate the loop. Disable 
    ** WHERE clause terms made redundant by the index range scan.
    */
    pLevel->op = bRev ? OP_Prev : OP_Next;
    pLevel->p1 = iIdxCur;
  }else

#ifndef SQLITE_OMIT_OR_OPTIMIZATION
  if( pLevel->plan.wsFlags & WHERE_MULTI_OR ){
    /* Case 4:  Two or more separately indexed terms connected by OR
    **
    ** Example:
    **
    **   CREATE TABLE t1(a,b,c,d);
    **   CREATE INDEX i1 ON t1(a);
    **   CREATE INDEX i2 ON t1(b);
    **   CREATE INDEX i3 ON t1(c);
    **
    **   SELECT * FROM t1 WHERE a=5 OR b=7 OR (c=11 AND d=13)
    **
    ** In the example, there are three indexed terms connected by OR.
    ** The top of the loop looks like this:
    **
    **          Null       1                # Zero the rowset in reg 1
    **
    ** Then, for each indexed term, the following. The arguments to
    ** RowSetTest are such that the rowid of the current row is inserted
    ** into the RowSet. If it is already present, control skips the
    ** Gosub opcode and jumps straight to the code generated by WhereEnd().
    **
    **        sqlite3WhereBegin(<term>)
    **          RowSetTest                  # Insert rowid into rowset
    **          Gosub      2 A
    **        sqlite3WhereEnd()
    **
    ** Following the above, code to terminate the loop. Label A, the target
    ** of the Gosub above, jumps to the instruction right after the Goto.
    **
    **          Null       1                # Zero the rowset in reg 1
    **          Goto       B                # The loop is finished.
    **
    **       A: <loop body>                 # Return data, whatever.
    **
    **          Return     2                # Jump back to the Gosub
    **
    **       B: <after the loop>
    **
    */
    WhereClause *pOrWc;    /* The OR-clause broken out into subterms */
    WhereTerm *pFinal;     /* Final subterm within the OR-clause. */
    SrcList oneTab;        /* Shortened table list */

    int regReturn = ++pParse->nMem;           /* Register used with OP_Gosub */
    int regRowset;                            /* Register for RowSet object */
    int regRowid;                             /* Register holding rowid */
    int iLoopBody = sqlite3VdbeMakeLabel(v);  /* Start of loop body */
    int iRetInit;                             /* Address of regReturn init */
    int ii;
   
    pTerm = pLevel->plan.u.pTerm;
    assert( pTerm!=0 );
    assert( pTerm->eOperator==WO_OR );
    assert( (pTerm->wtFlags & TERM_ORINFO)!=0 );
    pOrWc = &pTerm->u.pOrInfo->wc;
    pFinal = &pOrWc->a[pOrWc->nTerm-1];

    /* Set up a SrcList containing just the table being scanned by this loop. */
    oneTab.nSrc = 1;
    oneTab.nAlloc = 1;
    oneTab.a[0] = *pTabItem;

    /* Initialize the rowset register to contain NULL. An SQL NULL is 
    ** equivalent to an empty rowset.
    **
    ** Also initialize regReturn to contain the address of the instruction 
    ** immediately following the OP_Return at the bottom of the loop. This
    ** is required in a few obscure LEFT JOIN cases where control jumps
    ** over the top of the loop into the body of it. In this case the 
    ** correct response for the end-of-loop code (the OP_Return) is to 
    ** fall through to the next instruction, just as an OP_Next does if
    ** called on an uninitialized cursor.
    */
    if( (wctrlFlags & WHERE_DUPLICATES_OK)==0 ){
      regRowset = ++pParse->nMem;
      regRowid = ++pParse->nMem;
      sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset);
    }
    iRetInit = sqlite3VdbeAddOp2(v, OP_Integer, 0, regReturn);

    for(ii=0; ii<pOrWc->nTerm; ii++){
      WhereTerm *pOrTerm = &pOrWc->a[ii];
      if( pOrTerm->leftCursor==iCur || pOrTerm->eOperator==WO_AND ){
        WhereInfo *pSubWInfo;          /* Info for single OR-term scan */

        /* Loop through table entries that match term pOrTerm. */
        pSubWInfo = sqlite3WhereBegin(pParse, &oneTab, pOrTerm->pExpr, 0,
                        WHERE_OMIT_OPEN | WHERE_OMIT_CLOSE | WHERE_FORCE_TABLE);
        if( pSubWInfo ){
          if( (wctrlFlags & WHERE_DUPLICATES_OK)==0 ){
            int iSet = ((ii==pOrWc->nTerm-1)?-1:ii);
            int r;
            r = sqlite3ExprCodeGetColumn(pParse, pTabItem->pTab, -1, iCur, 
                                         regRowid, 0);
            sqlite3VdbeAddOp4(v, OP_RowSetTest, regRowset, 
                             sqlite3VdbeCurrentAddr(v)+2,
                             r, (char*)iSet, P4_INT32);
          }
          sqlite3VdbeAddOp2(v, OP_Gosub, regReturn, iLoopBody);

          /* Finish the loop through table entries that match term pOrTerm. */
          sqlite3WhereEnd(pSubWInfo);
        }
      }
    }
    sqlite3VdbeChangeP1(v, iRetInit, sqlite3VdbeCurrentAddr(v));
    /* sqlite3VdbeAddOp2(v, OP_Null, 0, regRowset); */
    sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrBrk);
    sqlite3VdbeResolveLabel(v, iLoopBody);

    pLevel->op = OP_Return;
    pLevel->p1 = regReturn;
    disableTerm(pLevel, pTerm);
  }else
#endif /* SQLITE_OMIT_OR_OPTIMIZATION */

  {
    /* Case 5:  There is no usable index.  We must do a complete
    **          scan of the entire table.
    */
    static const u8 aStep[] = { OP_Next, OP_Prev };
    static const u8 aStart[] = { OP_Rewind, OP_Last };
    assert( bRev==0 || bRev==1 );
    assert( omitTable==0 );
    pLevel->op = aStep[bRev];
    pLevel->p1 = iCur;
    pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrBrk);
    pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP;
  }
  notReady &= ~getMask(pWC->pMaskSet, iCur);

  /* Insert code to test every subexpression that can be completely
  ** computed using the current set of tables.
  */
  k = 0;
  for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){
    Expr *pE;
    testcase( pTerm->wtFlags & TERM_VIRTUAL );
    testcase( pTerm->wtFlags & TERM_CODED );
    if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
    if( (pTerm->prereqAll & notReady)!=0 ) continue;
    pE = pTerm->pExpr;
    assert( pE!=0 );
    if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){
      continue;
    }
    sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL);
    k = 1;
    pTerm->wtFlags |= TERM_CODED;
  }

  /* For a LEFT OUTER JOIN, generate code that will record the fact that
  ** at least one row of the right table has matched the left table.  
  */
  if( pLevel->iLeftJoin ){
    pLevel->addrFirst = sqlite3VdbeCurrentAddr(v);
    sqlite3VdbeAddOp2(v, OP_Integer, 1, pLevel->iLeftJoin);
    VdbeComment((v, "record LEFT JOIN hit"));
    sqlite3ExprCacheClear(pParse);
    for(pTerm=pWC->a, j=0; j<pWC->nTerm; j++, pTerm++){
      testcase( pTerm->wtFlags & TERM_VIRTUAL );
      testcase( pTerm->wtFlags & TERM_CODED );
      if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue;
      if( (pTerm->prereqAll & notReady)!=0 ) continue;
      assert( pTerm->pExpr );
      sqlite3ExprIfFalse(pParse, pTerm->pExpr, addrCont, SQLITE_JUMPIFNULL);
      pTerm->wtFlags |= TERM_CODED;
    }
  }
  sqlite3ReleaseTempReg(pParse, iReleaseReg);

  return notReady;
}

#if defined(SQLITE_TEST)
/*
** The following variable holds a text description of query plan generated
** by the most recent call to sqlite3WhereBegin().  Each call to WhereBegin
** overwrites the previous.  This information is used for testing and
** analysis only.
*/
char sqlite3_query_plan[BMS*2*40];  /* Text of the join */
static int nQPlan = 0;              /* Next free slow in _query_plan[] */

#endif /* SQLITE_TEST */


/*
** Free a WhereInfo structure
*/
static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){
  if( pWInfo ){
    int i;
    for(i=0; i<pWInfo->nLevel; i++){
      sqlite3_index_info *pInfo = pWInfo->a[i].pIdxInfo;
      if( pInfo ){
        /* assert( pInfo->needToFreeIdxStr==0 || db->mallocFailed ); */
        if( pInfo->needToFreeIdxStr ){
          sqlite3_free(pInfo->idxStr);
        }
        sqlite3DbFree(db, pInfo);
      }
    }
    whereClauseClear(pWInfo->pWC);
    sqlite3DbFree(db, pWInfo);
  }
}


/*
** Generate the beginning of the loop used for WHERE clause processing.
** The return value is a pointer to an opaque structure that contains
** information needed to terminate the loop.  Later, the calling routine
** should invoke sqlite3WhereEnd() with the return value of this function
** in order to complete the WHERE clause processing.
**
** If an error occurs, this routine returns NULL.
**
** The basic idea is to do a nested loop, one loop for each table in
** the FROM clause of a select.  (INSERT and UPDATE statements are the
** same as a SELECT with only a single table in the FROM clause.)  For
** example, if the SQL is this:
**
**       SELECT * FROM t1, t2, t3 WHERE ...;
**
** Then the code generated is conceptually like the following:
**
**      foreach row1 in t1 do       \    Code generated
**        foreach row2 in t2 do      |-- by sqlite3WhereBegin()
**          foreach row3 in t3 do   /
**            ...
**          end                     \    Code generated
**        end                        |-- by sqlite3WhereEnd()
**      end                         /
**
** Note that the loops might not be nested in the order in which they
** appear in the FROM clause if a different order is better able to make
** use of indices.  Note also that when the IN operator appears in
** the WHERE clause, it might result in additional nested loops for
** scanning through all values on the right-hand side of the IN.
**
** There are Btree cursors associated with each table.  t1 uses cursor
** number pTabList->a[0].iCursor.  t2 uses the cursor pTabList->a[1].iCursor.
** And so forth.  This routine generates code to open those VDBE cursors
** and sqlite3WhereEnd() generates the code to close them.
**
** The code that sqlite3WhereBegin() generates leaves the cursors named
** in pTabList pointing at their appropriate entries.  The [...] code
** can use OP_Column and OP_Rowid opcodes on these cursors to extract
** data from the various tables of the loop.
**
** If the WHERE clause is empty, the foreach loops must each scan their
** entire tables.  Thus a three-way join is an O(N^3) operation.  But if
** the tables have indices and there are terms in the WHERE clause that
** refer to those indices, a complete table scan can be avoided and the
** code will run much faster.  Most of the work of this routine is checking
** to see if there are indices that can be used to speed up the loop.
**
** Terms of the WHERE clause are also used to limit which rows actually
** make it to the "..." in the middle of the loop.  After each "foreach",
** terms of the WHERE clause that use only terms in that loop and outer
** loops are evaluated and if false a jump is made around all subsequent
** inner loops (or around the "..." if the test occurs within the inner-
** most loop)
**
** OUTER JOINS
**
** An outer join of tables t1 and t2 is conceptally coded as follows:
**
**    foreach row1 in t1 do
**      flag = 0
**      foreach row2 in t2 do
**        start:
**          ...
**          flag = 1
**      end
**      if flag==0 then
**        move the row2 cursor to a null row
**        goto start
**      fi
**    end
**
** ORDER BY CLAUSE PROCESSING
**
** *ppOrderBy is a pointer to the ORDER BY clause of a SELECT statement,
** if there is one.  If there is no ORDER BY clause or if this routine
** is called from an UPDATE or DELETE statement, then ppOrderBy is NULL.
**
** If an index can be used so that the natural output order of the table
** scan is correct for the ORDER BY clause, then that index is used and
** *ppOrderBy is set to NULL.  This is an optimization that prevents an
** unnecessary sort of the result set if an index appropriate for the
** ORDER BY clause already exists.
**
** If the where clause loops cannot be arranged to provide the correct
** output order, then the *ppOrderBy is unchanged.
*/
WhereInfo *sqlite3WhereBegin(
  Parse *pParse,        /* The parser context */
  SrcList *pTabList,    /* A list of all tables to be scanned */
  Expr *pWhere,         /* The WHERE clause */
  ExprList **ppOrderBy, /* An ORDER BY clause, or NULL */
  u16 wctrlFlags        /* One of the WHERE_* flags defined in sqliteInt.h */
){
  int i;                     /* Loop counter */
  int nByteWInfo;            /* Num. bytes allocated for WhereInfo struct */
  WhereInfo *pWInfo;         /* Will become the return value of this function */
  Vdbe *v = pParse->pVdbe;   /* The virtual database engine */
  Bitmask notReady;          /* Cursors that are not yet positioned */
  WhereMaskSet *pMaskSet;    /* The expression mask set */
  WhereClause *pWC;               /* Decomposition of the WHERE clause */
  struct SrcList_item *pTabItem;  /* A single entry from pTabList */
  WhereLevel *pLevel;             /* A single level in the pWInfo list */
  int iFrom;                      /* First unused FROM clause element */
  int andFlags;              /* AND-ed combination of all pWC->a[].wtFlags */
  sqlite3 *db;               /* Database connection */
  ExprList *pOrderBy = 0;

  /* The number of tables in the FROM clause is limited by the number of
  ** bits in a Bitmask 
  */
  if( pTabList->nSrc>BMS ){
    sqlite3ErrorMsg(pParse, "at most %d tables in a join", BMS);
    return 0;
  }

  if( ppOrderBy ){
    pOrderBy = *ppOrderBy;
  }

  /* Allocate and initialize the WhereInfo structure that will become the
  ** return value. A single allocation is used to store the WhereInfo
  ** struct, the contents of WhereInfo.a[], the WhereClause structure
  ** and the WhereMaskSet structure. Since WhereClause contains an 8-byte
  ** field (type Bitmask) it must be aligned on an 8-byte boundary on
  ** some architectures. Hence the ROUND8() below.
  */
  db = pParse->db;
  nByteWInfo = ROUND8(sizeof(WhereInfo)+(pTabList->nSrc-1)*sizeof(WhereLevel));
  pWInfo = sqlite3DbMallocZero(db, 
      nByteWInfo + 
      sizeof(WhereClause) +
      sizeof(WhereMaskSet)
  );
  if( db->mallocFailed ){
    goto whereBeginError;
  }
  pWInfo->nLevel = pTabList->nSrc;
  pWInfo->pParse = pParse;
  pWInfo->pTabList = pTabList;
  pWInfo->iBreak = sqlite3VdbeMakeLabel(v);
  pWInfo->pWC = pWC = (WhereClause *)&((u8 *)pWInfo)[nByteWInfo];
  pWInfo->wctrlFlags = wctrlFlags;
  pMaskSet = (WhereMaskSet*)&pWC[1];

  /* Split the WHERE clause into separate subexpressions where each
  ** subexpression is separated by an AND operator.
  */
  initMaskSet(pMaskSet);
  whereClauseInit(pWC, pParse, pMaskSet);
  sqlite3ExprCodeConstants(pParse, pWhere);
  whereSplit(pWC, pWhere, TK_AND);
    
  /* Special case: a WHERE clause that is constant.  Evaluate the
  ** expression and either jump over all of the code or fall thru.
  */
  if( pWhere && (pTabList->nSrc==0 || sqlite3ExprIsConstantNotJoin(pWhere)) ){
    sqlite3ExprIfFalse(pParse, pWhere, pWInfo->iBreak, SQLITE_JUMPIFNULL);
    pWhere = 0;
  }

  /* Assign a bit from the bitmask to every term in the FROM clause.
  **
  ** When assigning bitmask values to FROM clause cursors, it must be
  ** the case that if X is the bitmask for the N-th FROM clause term then
  ** the bitmask for all FROM clause terms to the left of the N-th term
  ** is (X-1).   An expression from the ON clause of a LEFT JOIN can use
  ** its Expr.iRightJoinTable value to find the bitmask of the right table
  ** of the join.  Subtracting one from the right table bitmask gives a
  ** bitmask for all tables to the left of the join.  Knowing the bitmask
  ** for all tables to the left of a left join is important.  Ticket #3015.
  */
  for(i=0; i<pTabList->nSrc; i++){
    createMask(pMaskSet, pTabList->a[i].iCursor);
  }
#ifndef NDEBUG
  {
    Bitmask toTheLeft = 0;
    for(i=0; i<pTabList->nSrc; i++){
      Bitmask m = getMask(pMaskSet, pTabList->a[i].iCursor);
      assert( (m-1)==toTheLeft );
      toTheLeft |= m;
    }
  }
#endif

  /* Analyze all of the subexpressions.  Note that exprAnalyze() might
  ** add new virtual terms onto the end of the WHERE clause.  We do not
  ** want to analyze these virtual terms, so start analyzing at the end
  ** and work forward so that the added virtual terms are never processed.
  */
  exprAnalyzeAll(pTabList, pWC);
  if( db->mallocFailed ){
    goto whereBeginError;
  }

  /* Chose the best index to use for each table in the FROM clause.
  **
  ** This loop fills in the following fields:
  **
  **   pWInfo->a[].pIdx      The index to use for this level of the loop.
  **   pWInfo->a[].wsFlags   WHERE_xxx flags associated with pIdx
  **   pWInfo->a[].nEq       The number of == and IN constraints
  **   pWInfo->a[].iFrom     Which term of the FROM clause is being coded
  **   pWInfo->a[].iTabCur   The VDBE cursor for the database table
  **   pWInfo->a[].iIdxCur   The VDBE cursor for the index
  **   pWInfo->a[].pTerm     When wsFlags==WO_OR, the OR-clause term
  **
  ** This loop also figures out the nesting order of tables in the FROM
  ** clause.
  */
  notReady = ~(Bitmask)0;
  pTabItem = pTabList->a;
  pLevel = pWInfo->a;
  andFlags = ~0;
  WHERETRACE(("*** Optimizer Start ***\n"));
  for(i=iFrom=0, pLevel=pWInfo->a; i<pTabList->nSrc; i++, pLevel++){
    WhereCost bestPlan;         /* Most efficient plan seen so far */
    Index *pIdx;                /* Index for FROM table at pTabItem */
    int j;                      /* For looping over FROM tables */
    int bestJ = 0;              /* The value of j */
    Bitmask m;                  /* Bitmask value for j or bestJ */
    int once = 0;               /* True when first table is seen */

    memset(&bestPlan, 0, sizeof(bestPlan));
    bestPlan.rCost = SQLITE_BIG_DBL;
    for(j=iFrom, pTabItem=&pTabList->a[j]; j<pTabList->nSrc; j++, pTabItem++){
      int doNotReorder;    /* True if this table should not be reordered */
      WhereCost sCost;     /* Cost information from best[Virtual]Index() */
      ExprList *pOrderBy;  /* ORDER BY clause for index to optimize */

      doNotReorder =  (pTabItem->jointype & (JT_LEFT|JT_CROSS))!=0;
      if( once && doNotReorder ) break;
      m = getMask(pMaskSet, pTabItem->iCursor);
      if( (m & notReady)==0 ){
        if( j==iFrom ) iFrom++;
        continue;
      }
      pOrderBy = ((i==0 && ppOrderBy )?*ppOrderBy:0);

      assert( pTabItem->pTab );
#ifndef SQLITE_OMIT_VIRTUALTABLE
      if( IsVirtual(pTabItem->pTab) ){
        sqlite3_index_info **pp = &pWInfo->a[j].pIdxInfo;
        bestVirtualIndex(pParse, pWC, pTabItem, notReady, pOrderBy, &sCost, pp);
      }else 
#endif
      {
        bestBtreeIndex(pParse, pWC, pTabItem, notReady, pOrderBy, &sCost);
      }
      if( once==0 || sCost.rCost<bestPlan.rCost ){
        once = 1;
        bestPlan = sCost;
        bestJ = j;
      }
      if( doNotReorder ) break;
    }
    assert( once );
    assert( notReady & getMask(pMaskSet, pTabList->a[bestJ].iCursor) );
    WHERETRACE(("*** Optimizer selects table %d for loop %d\n", bestJ,
           pLevel-pWInfo->a));
    if( (bestPlan.plan.wsFlags & WHERE_ORDERBY)!=0 ){
      *ppOrderBy = 0;
    }
    andFlags &= bestPlan.plan.wsFlags;
    pLevel->plan = bestPlan.plan;
    if( bestPlan.plan.wsFlags & WHERE_INDEXED ){
      pLevel->iIdxCur = pParse->nTab++;
    }else{
      pLevel->iIdxCur = -1;
    }
    notReady &= ~getMask(pMaskSet, pTabList->a[bestJ].iCursor);
    pLevel->iFrom = (u8)bestJ;

    /* Check that if the table scanned by this loop iteration had an
    ** INDEXED BY clause attached to it, that the named index is being
    ** used for the scan. If not, then query compilation has failed.
    ** Return an error.
    */
    pIdx = pTabList->a[bestJ].pIndex;
    if( pIdx ){
      if( (bestPlan.plan.wsFlags & WHERE_INDEXED)==0 ){
        sqlite3ErrorMsg(pParse, "cannot use index: %s", pIdx->zName);
        goto whereBeginError;
      }else{
        /* If an INDEXED BY clause is used, the bestIndex() function is
        ** guaranteed to find the index specified in the INDEXED BY clause
        ** if it find an index at all. */
        assert( bestPlan.plan.u.pIdx==pIdx );
      }
    }
  }
  WHERETRACE(("*** Optimizer Finished ***\n"));
  if( pParse->nErr || db->mallocFailed ){
    goto whereBeginError;
  }

  /* If the total query only selects a single row, then the ORDER BY
  ** clause is irrelevant.
  */
  if( (andFlags & WHERE_UNIQUE)!=0 && ppOrderBy ){
    *ppOrderBy = 0;
  }

  /* If the caller is an UPDATE or DELETE statement that is requesting
  ** to use a one-pass algorithm, determine if this is appropriate.
  ** The one-pass algorithm only works if the WHERE clause constraints
  ** the statement to update a single row.
  */
  assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 );
  if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 && (andFlags & WHERE_UNIQUE)!=0 ){
    pWInfo->okOnePass = 1;
    pWInfo->a[0].plan.wsFlags &= ~WHERE_IDX_ONLY;
  }

  /* Open all tables in the pTabList and any indices selected for
  ** searching those tables.
  */
  sqlite3CodeVerifySchema(pParse, -1); /* Insert the cookie verifier Goto */
  for(i=0, pLevel=pWInfo->a; i<pTabList->nSrc; i++, pLevel++){
    Table *pTab;     /* Table to open */
    int iDb;         /* Index of database containing table/index */

#ifndef SQLITE_OMIT_EXPLAIN
    if( pParse->explain==2 ){
      char *zMsg;
      struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom];
      zMsg = sqlite3MPrintf(db, "TABLE %s", pItem->zName);
      if( pItem->zAlias ){
        zMsg = sqlite3MAppendf(db, zMsg, "%s AS %s", zMsg, pItem->zAlias);
      }
      if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){
        zMsg = sqlite3MAppendf(db, zMsg, "%s WITH INDEX %s",
           zMsg, pLevel->plan.u.pIdx->zName);
      }else if( pLevel->plan.wsFlags & WHERE_MULTI_OR ){
        zMsg = sqlite3MAppendf(db, zMsg, "%s VIA MULTI-INDEX UNION", zMsg);
      }else if( pLevel->plan.wsFlags & (WHERE_ROWID_EQ|WHERE_ROWID_RANGE) ){
        zMsg = sqlite3MAppendf(db, zMsg, "%s USING PRIMARY KEY", zMsg);
      }
#ifndef SQLITE_OMIT_VIRTUALTABLE
      else if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
        sqlite3_index_info *pVtabIdx = pLevel->plan.u.pVtabIdx;
        zMsg = sqlite3MAppendf(db, zMsg, "%s VIRTUAL TABLE INDEX %d:%s", zMsg,
                    pVtabIdx->idxNum, pVtabIdx->idxStr);
      }
#endif
      if( pLevel->plan.wsFlags & WHERE_ORDERBY ){
        zMsg = sqlite3MAppendf(db, zMsg, "%s ORDER BY", zMsg);
      }
      sqlite3VdbeAddOp4(v, OP_Explain, i, pLevel->iFrom, 0, zMsg, P4_DYNAMIC);
    }
#endif /* SQLITE_OMIT_EXPLAIN */
    pTabItem = &pTabList->a[pLevel->iFrom];
    pTab = pTabItem->pTab;
    iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema);
    if( (pTab->tabFlags & TF_Ephemeral)!=0 || pTab->pSelect ) continue;
#ifndef SQLITE_OMIT_VIRTUALTABLE
    if( (pLevel->plan.wsFlags & WHERE_VIRTUALTABLE)!=0 ){
      int iCur = pTabItem->iCursor;
      sqlite3VdbeAddOp4(v, OP_VOpen, iCur, 0, 0,
                        (const char*)pTab->pVtab, P4_VTAB);
    }else
#endif
    if( (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0
         && (wctrlFlags & WHERE_OMIT_OPEN)==0 ){
      int op = pWInfo->okOnePass ? OP_OpenWrite : OP_OpenRead;
      sqlite3OpenTable(pParse, pTabItem->iCursor, iDb, pTab, op);
      if( !pWInfo->okOnePass && pTab->nCol<BMS ){
        Bitmask b = pTabItem->colUsed;
        int n = 0;
        for(; b; b=b>>1, n++){}
        sqlite3VdbeChangeP4(v, sqlite3VdbeCurrentAddr(v)-1, SQLITE_INT_TO_PTR(n), P4_INT32);
        assert( n<=pTab->nCol );
      }
    }else{
      sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName);
    }
    pLevel->iTabCur = pTabItem->iCursor;
    if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){
      Index *pIx = pLevel->plan.u.pIdx;
      KeyInfo *pKey = sqlite3IndexKeyinfo(pParse, pIx);
      int iIdxCur = pLevel->iIdxCur;
      assert( pIx->pSchema==pTab->pSchema );
      assert( iIdxCur>=0 );
      sqlite3VdbeAddOp4(v, OP_OpenRead, iIdxCur, pIx->tnum, iDb,
                        (char*)pKey, P4_KEYINFO_HANDOFF);
      VdbeComment((v, "%s", pIx->zName));
    }
    sqlite3CodeVerifySchema(pParse, iDb);
  }
  pWInfo->iTop = sqlite3VdbeCurrentAddr(v);

  /* Generate the code to do the search.  Each iteration of the for
  ** loop below generates code for a single nested loop of the VM
  ** program.
  */
  notReady = ~(Bitmask)0;
  for(i=0; i<pTabList->nSrc; i++){
    notReady = codeOneLoopStart(pWInfo, i, wctrlFlags, notReady);
    pWInfo->iContinue = pWInfo->a[i].addrCont;
  }

#ifdef SQLITE_TEST  /* For testing and debugging use only */
  /* Record in the query plan information about the current table
  ** and the index used to access it (if any).  If the table itself
  ** is not used, its name is just '{}'.  If no index is used
  ** the index is listed as "{}".  If the primary key is used the
  ** index name is '*'.
  */
  for(i=0; i<pTabList->nSrc; i++){
    char *z;
    int n;
    pLevel = &pWInfo->a[i];
    pTabItem = &pTabList->a[pLevel->iFrom];
    z = pTabItem->zAlias;
    if( z==0 ) z = pTabItem->pTab->zName;
    n = sqlite3Strlen30(z);
    if( n+nQPlan < sizeof(sqlite3_query_plan)-10 ){
      if( pLevel->plan.wsFlags & WHERE_IDX_ONLY ){
        memcpy(&sqlite3_query_plan[nQPlan], "{}", 2);
        nQPlan += 2;
      }else{
        memcpy(&sqlite3_query_plan[nQPlan], z, n);
        nQPlan += n;
      }
      sqlite3_query_plan[nQPlan++] = ' ';
    }
    testcase( pLevel->plan.wsFlags & WHERE_ROWID_EQ );
    testcase( pLevel->plan.wsFlags & WHERE_ROWID_RANGE );
    if( pLevel->plan.wsFlags & (WHERE_ROWID_EQ|WHERE_ROWID_RANGE) ){
      memcpy(&sqlite3_query_plan[nQPlan], "* ", 2);
      nQPlan += 2;
    }else if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){
      n = sqlite3Strlen30(pLevel->plan.u.pIdx->zName);
      if( n+nQPlan < sizeof(sqlite3_query_plan)-2 ){
        memcpy(&sqlite3_query_plan[nQPlan], pLevel->plan.u.pIdx->zName, n);
        nQPlan += n;
        sqlite3_query_plan[nQPlan++] = ' ';
      }
    }else{
      memcpy(&sqlite3_query_plan[nQPlan], "{} ", 3);
      nQPlan += 3;
    }
  }
  while( nQPlan>0 && sqlite3_query_plan[nQPlan-1]==' ' ){
    sqlite3_query_plan[--nQPlan] = 0;
  }
  sqlite3_query_plan[nQPlan] = 0;
  nQPlan = 0;
#endif /* SQLITE_TEST // Testing and debugging use only */

  /* Record the continuation address in the WhereInfo structure.  Then
  ** clean up and return.
  */
  return pWInfo;

  /* Jump here if malloc fails */
whereBeginError:
  whereInfoFree(db, pWInfo);
  return 0;
}

/*
** Generate the end of the WHERE loop.  See comments on 
** sqlite3WhereBegin() for additional information.
*/
void sqlite3WhereEnd(WhereInfo *pWInfo){
  Parse *pParse = pWInfo->pParse;
  Vdbe *v = pParse->pVdbe;
  int i;
  WhereLevel *pLevel;
  SrcList *pTabList = pWInfo->pTabList;
  sqlite3 *db = pParse->db;

  /* Generate loop termination code.
  */
  sqlite3ExprCacheClear(pParse);
  for(i=pTabList->nSrc-1; i>=0; i--){
    pLevel = &pWInfo->a[i];
    sqlite3VdbeResolveLabel(v, pLevel->addrCont);
    if( pLevel->op!=OP_Noop ){
      sqlite3VdbeAddOp2(v, pLevel->op, pLevel->p1, pLevel->p2);
      sqlite3VdbeChangeP5(v, pLevel->p5);
    }
    if( pLevel->plan.wsFlags & WHERE_IN_ABLE && pLevel->u.in.nIn>0 ){
      struct InLoop *pIn;
      int j;
      sqlite3VdbeResolveLabel(v, pLevel->addrNxt);
      for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){
        sqlite3VdbeJumpHere(v, pIn->addrInTop+1);
        sqlite3VdbeAddOp2(v, OP_Next, pIn->iCur, pIn->addrInTop);
        sqlite3VdbeJumpHere(v, pIn->addrInTop-1);
      }
      sqlite3DbFree(db, pLevel->u.in.aInLoop);
    }
    sqlite3VdbeResolveLabel(v, pLevel->addrBrk);
    if( pLevel->iLeftJoin ){
      int addr;
      addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin);
      sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor);
      if( pLevel->iIdxCur>=0 ){
        sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iIdxCur);
      }
      if( pLevel->op==OP_Return ){
        sqlite3VdbeAddOp2(v, OP_Gosub, pLevel->p1, pLevel->addrFirst);
      }else{
        sqlite3VdbeAddOp2(v, OP_Goto, 0, pLevel->addrFirst);
      }
      sqlite3VdbeJumpHere(v, addr);
    }
  }

  /* The "break" point is here, just past the end of the outer loop.
  ** Set it.
  */
  sqlite3VdbeResolveLabel(v, pWInfo->iBreak);

  /* Close all of the cursors that were opened by sqlite3WhereBegin.
  */
  for(i=0, pLevel=pWInfo->a; i<pTabList->nSrc; i++, pLevel++){
    struct SrcList_item *pTabItem = &pTabList->a[pLevel->iFrom];
    Table *pTab = pTabItem->pTab;
    assert( pTab!=0 );
    if( (pTab->tabFlags & TF_Ephemeral)!=0 || pTab->pSelect ) continue;
    if( (pWInfo->wctrlFlags & WHERE_OMIT_CLOSE)==0 ){
      if( !pWInfo->okOnePass && (pLevel->plan.wsFlags & WHERE_IDX_ONLY)==0 ){
        sqlite3VdbeAddOp1(v, OP_Close, pTabItem->iCursor);
      }
      if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){
        sqlite3VdbeAddOp1(v, OP_Close, pLevel->iIdxCur);
      }
    }

    /* If this scan uses an index, make code substitutions to read data
    ** from the index in preference to the table. Sometimes, this means
    ** the table need never be read from. This is a performance boost,
    ** as the vdbe level waits until the table is read before actually
    ** seeking the table cursor to the record corresponding to the current
    ** position in the index.
    ** 
    ** Calls to the code generator in between sqlite3WhereBegin and
    ** sqlite3WhereEnd will have created code that references the table
    ** directly.  This loop scans all that code looking for opcodes
    ** that reference the table and converts them into opcodes that
    ** reference the index.
    */
    if( (pLevel->plan.wsFlags & WHERE_INDEXED)!=0 ){
      int k, j, last;
      VdbeOp *pOp;
      Index *pIdx = pLevel->plan.u.pIdx;
      int useIndexOnly = pLevel->plan.wsFlags & WHERE_IDX_ONLY;

      assert( pIdx!=0 );
      pOp = sqlite3VdbeGetOp(v, pWInfo->iTop);
      last = sqlite3VdbeCurrentAddr(v);
      for(k=pWInfo->iTop; k<last; k++, pOp++){
        if( pOp->p1!=pLevel->iTabCur ) continue;
        if( pOp->opcode==OP_Column ){
          for(j=0; j<pIdx->nColumn; j++){
            if( pOp->p2==pIdx->aiColumn[j] ){
              pOp->p2 = j;
              pOp->p1 = pLevel->iIdxCur;
              break;
            }
          }
          assert(!useIndexOnly || j<pIdx->nColumn);
        }else if( pOp->opcode==OP_Rowid ){
          pOp->p1 = pLevel->iIdxCur;
          pOp->opcode = OP_IdxRowid;
        }else if( pOp->opcode==OP_NullRow && useIndexOnly ){
          pOp->opcode = OP_Noop;
        }
      }
    }
  }

  /* Final cleanup
  */
  whereInfoFree(db, pWInfo);
  return;
}