Manual cleanups following clang-formatting.
This primarily addresses two things:
* Tab characters still present, mostly in comments
* printfs split across multiple lines in a suboptimal way
Along the way this fixes a few spelling errors and other minor changes.
BUG=none
R=kwiberg@webrtc.org
Review URL: https://webrtc-codereview.appspot.com/52689004
Cr-Commit-Position: refs/heads/master@{#9406}
diff --git a/webrtc/modules/audio_coding/neteq/test/RTPencode.cc b/webrtc/modules/audio_coding/neteq/test/RTPencode.cc
index 87f9494..7d8d60d 100644
--- a/webrtc/modules/audio_coding/neteq/test/RTPencode.cc
+++ b/webrtc/modules/audio_coding/neteq/test/RTPencode.cc
@@ -305,14 +305,12 @@
if ((argc != 6) && (argc != 7)) {
/* print help text and exit */
printf("Application to encode speech into an RTP stream.\n");
- printf(
- "The program reads a PCM file and encodes is using the specified "
- "codec.\n");
- printf(
- "The coded speech is packetized in RTP packest and written to the "
- "output file.\n");
- printf(
- "The format of the RTP stream file is simlilar to that of rtpplay,\n");
+ printf("The program reads a PCM file and encodes is using the specified "
+ "codec.\n");
+ printf("The coded speech is packetized in RTP packest and written to the "
+ "output file.\n");
+ printf("The format of the RTP stream file is simlilar to that of "
+ "rtpplay,\n");
printf("but with the receive time euqal to 0 for all packets.\n");
printf("Usage:\n\n");
printf("%s PCMfile RTPfile frameLen codec useVAD bitrate\n", argv[0]);
@@ -322,9 +320,8 @@
printf("RTPfile : RTP stream output file\n\n");
- printf(
- "frameLen : 80...960... Number of samples per packet (limit "
- "depends on codec)\n\n");
+ printf("frameLen : 80...960... Number of samples per packet (limit "
+ "depends on codec)\n\n");
printf("codecName\n");
#ifdef CODEC_PCM16B
@@ -346,43 +343,36 @@
printf(" : pcmu g711 u-law (8kHz)\n");
#endif
#ifdef CODEC_G729
- printf(
- " : g729 G729 (8kHz and 8kbps) CELP (One-Three "
- "frame(s)/packet)\n");
+ printf(" : g729 G729 (8kHz and 8kbps) CELP (One-Three "
+ "frame(s)/packet)\n");
#endif
#ifdef CODEC_G729_1
- printf(
- " : g729.1 G729.1 (16kHz) variable rate (8--32 "
- "kbps)\n");
+ printf(" : g729.1 G729.1 (16kHz) variable rate (8--32 "
+ "kbps)\n");
#endif
#ifdef CODEC_G722_1_16
- printf(
- " : g722.1_16 G722.1 coder (16kHz) (g722.1 with "
- "16kbps)\n");
+ printf(" : g722.1_16 G722.1 coder (16kHz) (g722.1 with "
+ "16kbps)\n");
#endif
#ifdef CODEC_G722_1_24
- printf(
- " : g722.1_24 G722.1 coder (16kHz) (the 24kbps "
- "version)\n");
+ printf(" : g722.1_24 G722.1 coder (16kHz) (the 24kbps "
+ "version)\n");
#endif
#ifdef CODEC_G722_1_32
- printf(
- " : g722.1_32 G722.1 coder (16kHz) (the 32kbps "
- "version)\n");
+ printf(" : g722.1_32 G722.1 coder (16kHz) (the 32kbps "
+ "version)\n");
#endif
#ifdef CODEC_G722_1C_24
- printf(
- " : g722.1C_24 G722.1 C coder (32kHz) (the 24kbps "
- "version)\n");
+ printf(" : g722.1C_24 G722.1 C coder (32kHz) (the 24kbps "
+ "version)\n");
#endif
#ifdef CODEC_G722_1C_32
- printf(
- " : g722.1C_32 G722.1 C coder (32kHz) (the 32kbps "
- "version)\n");
+ printf(" : g722.1C_32 G722.1 C coder (32kHz) (the 32kbps "
+ "version)\n");
#endif
#ifdef CODEC_G722_1C_48
- printf(
- " : g722.1C_48 G722.1 C coder (32kHz) (the 48kbps)\n");
+ printf(" : g722.1C_48 G722.1 C coder (32kHz) (the 48kbps "
+ "version)\n");
#endif
#ifdef CODEC_G726
@@ -392,39 +382,34 @@
printf(" : g726_40 G726 coder (8kHz) 40kbps\n");
#endif
#ifdef CODEC_AMR
- printf(
- " : AMRXk Adaptive Multi Rate CELP codec (8kHz)\n");
- printf(
- " X = 4.75, 5.15, 5.9, 6.7, 7.4, 7.95, 10.2 "
- "or 12.2\n");
+ printf(" : AMRXk Adaptive Multi Rate CELP codec "
+ "(8kHz)\n");
+ printf(" X = 4.75, 5.15, 5.9, 6.7, 7.4, 7.95, "
+ "10.2 or 12.2\n");
#endif
#ifdef CODEC_AMRWB
- printf(
- " : AMRwbXk Adaptive Multi Rate Wideband CELP codec "
- "(16kHz)\n");
- printf(
- " X = 7, 9, 12, 14, 16, 18, 20, 23 or 24\n");
+ printf(" : AMRwbXk Adaptive Multi Rate Wideband CELP "
+ "codec (16kHz)\n");
+ printf(" X = 7, 9, 12, 14, 16, 18, 20, 23 or "
+ "24\n");
#endif
#ifdef CODEC_ILBC
printf(" : ilbc iLBC codec (8kHz and 13.8kbps)\n");
#endif
#ifdef CODEC_ISAC
- printf(
- " : isac iSAC (16kHz and 32.0 kbps). To set rate "
- "specify a rate parameter as last parameter\n");
+ printf(" : isac iSAC (16kHz and 32.0 kbps). To set "
+ "rate specify a rate parameter as last parameter\n");
#endif
#ifdef CODEC_ISAC_SWB
- printf(
- " : isacswb iSAC SWB (32kHz and 32.0-52.0 kbps). To "
- "set rate specify a rate parameter as last parameter\n");
+ printf(" : isacswb iSAC SWB (32kHz and 32.0-52.0 kbps). "
+ "To set rate specify a rate parameter as last parameter\n");
#endif
#ifdef CODEC_GSMFR
printf(" : gsmfr GSM FR codec (8kHz and 13kbps)\n");
#endif
#ifdef CODEC_G722
- printf(
- " : g722 g722 coder (16kHz) (the 64kbps "
- "version)\n");
+ printf(" : g722 g722 coder (16kHz) (the 64kbps "
+ "version)\n");
#endif
#ifdef CODEC_SPEEX_8
printf(" : speex8 speex coder (8 kHz)\n");
@@ -434,14 +419,12 @@
#endif
#ifdef CODEC_RED
#ifdef CODEC_G711
- printf(
- " : red_pcm Redundancy RTP packet with 2*G711A "
- "frames\n");
+ printf(" : red_pcm Redundancy RTP packet with 2*G711A "
+ "frames\n");
#endif
#ifdef CODEC_ISAC
- printf(
- " : red_isac Redundancy RTP packet with 2*iSAC "
- "frames\n");
+ printf(" : red_isac Redundancy RTP packet with 2*iSAC "
+ "frames\n");
#endif
#endif
printf("\n");
@@ -451,12 +434,11 @@
printf("useVAD : 0 Voice Activity Detection is switched off\n");
printf(" : 1 Voice Activity Detection is switched on\n\n");
#else
- printf(
- "useVAD : 0 Voice Activity Detection switched off (on not "
- "supported)\n\n");
+ printf("useVAD : 0 Voice Activity Detection switched off (on not "
+ "supported)\n\n");
#endif
- printf(
- "bitrate : Codec bitrate in bps (only applies to vbr codecs)\n\n");
+ printf("bitrate : Codec bitrate in bps (only applies to vbr "
+ "codecs)\n\n");
return (0);
}
@@ -528,43 +510,36 @@
if (argc != 7) {
if (usedCodec == webrtc::kDecoderISAC) {
bitrate = 32000;
- printf(
- "Running iSAC at default bitrate of 32000 bps (to specify "
- "explicitly add the bps as last parameter)\n");
+ printf("Running iSAC at default bitrate of 32000 bps (to specify "
+ "explicitly add the bps as last parameter)\n");
} else // (usedCodec==webrtc::kDecoderISACswb)
{
bitrate = 56000;
- printf(
- "Running iSAC at default bitrate of 56000 bps (to specify "
- "explicitly add the bps as last parameter)\n");
+ printf("Running iSAC at default bitrate of 56000 bps (to specify "
+ "explicitly add the bps as last parameter)\n");
}
} else {
bitrate = atoi(argv[6]);
if (usedCodec == webrtc::kDecoderISAC) {
if ((bitrate < 10000) || (bitrate > 32000)) {
- printf(
- "Error: iSAC bitrate must be between 10000 and 32000 bps (%i is "
- "invalid)\n",
- bitrate);
+ printf("Error: iSAC bitrate must be between 10000 and 32000 bps (%i "
+ "is invalid)\n", bitrate);
exit(0);
}
printf("Running iSAC at bitrate of %i bps\n", bitrate);
} else // (usedCodec==webrtc::kDecoderISACswb)
{
if ((bitrate < 32000) || (bitrate > 56000)) {
- printf(
- "Error: iSAC SWB bitrate must be between 32000 and 56000 bps (%i "
- "is invalid)\n",
- bitrate);
+ printf("Error: iSAC SWB bitrate must be between 32000 and 56000 bps "
+ "(%i is invalid)\n", bitrate);
exit(0);
}
}
}
} else {
if (argc == 7) {
- printf(
- "Error: Bitrate parameter can only be specified for iSAC, G.723, and "
- "G.729.1\n");
+ printf("Error: Bitrate parameter can only be specified for iSAC, G.723, "
+ "and G.729.1\n");
exit(0);
}
}
@@ -972,23 +947,19 @@
(enc_frameSize == 400) || (enc_frameSize == 480)) {
ok = WebRtcG729_CreateEnc(&G729enc_inst[k]);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for G729 encoding "
- "instance\n");
+ printf("Error: Couldn't allocate memory for G729 encoding "
+ "instance\n");
exit(0);
}
} else {
- printf(
- "\nError: g729 only supports 10, 20, 30, 40, 50 or 60 "
- "ms!!\n\n");
+ printf("\nError: g729 only supports 10, 20, 30, 40, 50 or 60 "
+ "ms!!\n\n");
exit(0);
}
WebRtcG729_EncoderInit(G729enc_inst[k], vad);
if ((vad == 1) && (enc_frameSize != 80)) {
- printf(
- "\nError - This simulation only supports VAD for G729 at 10ms "
- "packets (not %dms)\n",
- (enc_frameSize >> 3));
+ printf("\nError - This simulation only supports VAD for G729 at "
+ "10ms packets (not %dms)\n", (enc_frameSize >> 3));
}
} else {
printf("\nError - g729 is only developed for 8kHz \n");
@@ -1003,9 +974,8 @@
(enc_frameSize == 960)) {
ok = WebRtcG7291_Create(&G729_1_inst[k]);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for G.729.1 codec "
- "instance\n");
+ printf("Error: Couldn't allocate memory for G.729.1 codec "
+ "instance\n");
exit(0);
}
} else {
@@ -1016,9 +986,8 @@
(bitrate % 2000 == 0)) ||
(bitrate == 8000))) {
/* must be 8, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, or 32 kbps */
- printf(
- "\nError: G.729.1 bitrate must be 8000 or 12000--32000 in "
- "steps of 2000 bps\n");
+ printf("\nError: G.729.1 bitrate must be 8000 or 12000--32000 in "
+ "steps of 2000 bps\n");
exit(0);
}
WebRtcG7291_EncoderInit(G729_1_inst[k], bitrate, 0 /* flag8kHz*/,
@@ -1036,9 +1005,8 @@
(enc_frameSize == 480)) {
ok = WebRtcSpeex_CreateEnc(&SPEEX8enc_inst[k], sampfreq);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for Speex encoding "
- "instance\n");
+ printf("Error: Couldn't allocate memory for Speex encoding "
+ "instance\n");
exit(0);
}
} else {
@@ -1046,9 +1014,8 @@
exit(0);
}
if ((vad == 1) && (enc_frameSize != 160)) {
- printf(
- "\nError - This simulation only supports VAD for Speex at 20ms "
- "packets (not %dms)\n",
+ printf("\nError - This simulation only supports VAD for Speex at "
+ "20ms packets (not %dms)\n",
(enc_frameSize >> 3));
vad = 0;
}
@@ -1057,9 +1024,8 @@
if (ok != 0)
exit(0);
} else {
- printf(
- "\nError - Speex8 called with sample frequency other than 8 "
- "kHz.\n\n");
+ printf("\nError - Speex8 called with sample frequency other than 8 "
+ "kHz.\n\n");
}
break;
#endif
@@ -1070,9 +1036,8 @@
(enc_frameSize == 960)) {
ok = WebRtcSpeex_CreateEnc(&SPEEX16enc_inst[k], sampfreq);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for Speex encoding "
- "instance\n");
+ printf("Error: Couldn't allocate memory for Speex encoding "
+ "instance\n");
exit(0);
}
} else {
@@ -1080,9 +1045,8 @@
exit(0);
}
if ((vad == 1) && (enc_frameSize != 320)) {
- printf(
- "\nError - This simulation only supports VAD for Speex at 20ms "
- "packets (not %dms)\n",
+ printf("\nError - This simulation only supports VAD for Speex at "
+ "20ms packets (not %dms)\n",
(enc_frameSize >> 4));
vad = 0;
}
@@ -1091,9 +1055,8 @@
if (ok != 0)
exit(0);
} else {
- printf(
- "\nError - Speex16 called with sample frequency other than 16 "
- "kHz.\n\n");
+ printf("\nError - Speex16 called with sample frequency other than 16 "
+ "kHz.\n\n");
}
break;
#endif
@@ -1268,9 +1231,8 @@
if (sampfreq == 16000) {
ok = WebRtcAmrWb_CreateEnc(&AMRWBenc_inst[k]);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for AMRWB encoding "
- "instance\n");
+ printf("Error: Couldn't allocate memory for AMRWB encoding "
+ "instance\n");
exit(0);
}
if (((enc_frameSize / 320) < 0) || ((enc_frameSize / 320) > 3) ||
@@ -1311,16 +1273,15 @@
if (sampfreq == 8000) {
ok = WebRtcIlbcfix_EncoderCreate(&iLBCenc_inst[k]);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for iLBC encoding instance\n");
+ printf("Error: Couldn't allocate memory for iLBC encoding "
+ "instance\n");
exit(0);
}
if ((enc_frameSize == 160) || (enc_frameSize == 240) ||
(enc_frameSize == 320) || (enc_frameSize == 480)) {
} else {
- printf(
- "\nError - iLBC only supports 160, 240, 320 and 480 "
- "enc_frameSize (20, 30, 40 and 60 ms)\n");
+ printf("\nError - iLBC only supports 160, 240, 320 and 480 "
+ "enc_frameSize (20, 30, 40 and 60 ms)\n");
exit(0);
}
if ((enc_frameSize == 160) || (enc_frameSize == 320)) {
@@ -1351,17 +1312,15 @@
}
WebRtcIsac_EncoderInit(ISAC_inst[k], 1);
if ((bitrate < 10000) || (bitrate > 32000)) {
- printf(
- "\nError - iSAC bitrate has to be between 10000 and 32000 bps "
- "(not %i)\n",
+ printf("\nError - iSAC bitrate has to be between 10000 and 32000 "
+ "bps (not %i)\n",
bitrate);
exit(0);
}
WebRtcIsac_Control(ISAC_inst[k], bitrate, enc_frameSize >> 4);
} else {
- printf(
- "\nError - iSAC only supports 480 or 960 enc_frameSize (30 or 60 "
- "ms)\n");
+ printf("\nError - iSAC only supports 480 or 960 enc_frameSize (30 or "
+ "60 ms)\n");
exit(0);
}
break;
@@ -1381,17 +1340,14 @@
}
WebRtcIsacfix_EncoderInit(ISAC_inst[k], 1);
if ((bitrate < 10000) || (bitrate > 32000)) {
- printf(
- "\nError - iSAC bitrate has to be between 10000 and 32000 bps "
- "(not %i)\n",
- bitrate);
+ printf("\nError - iSAC bitrate has to be between 10000 and 32000 "
+ "bps (not %i)\n", bitrate);
exit(0);
}
WebRtcIsacfix_Control(ISAC_inst[k], bitrate, enc_frameSize >> 4);
} else {
- printf(
- "\nError - iSAC only supports 480 or 960 enc_frameSize (30 or 60 "
- "ms)\n");
+ printf("\nError - iSAC only supports 480 or 960 enc_frameSize (30 or "
+ "60 ms)\n");
exit(0);
}
break;
@@ -1416,16 +1372,14 @@
}
WebRtcIsac_EncoderInit(ISACSWB_inst[k], 1);
if ((bitrate < 32000) || (bitrate > 56000)) {
- printf(
- "\nError - iSAC SWB bitrate has to be between 32000 and 56000 "
- "bps (not %i)\n",
- bitrate);
+ printf("\nError - iSAC SWB bitrate has to be between 32000 and "
+ "56000 bps (not %i)\n", bitrate);
exit(0);
}
WebRtcIsac_Control(ISACSWB_inst[k], bitrate, enc_frameSize >> 5);
} else {
- printf(
- "\nError - iSAC SWB only supports 960 enc_frameSize (30 ms)\n");
+ printf("\nError - iSAC SWB only supports 960 enc_frameSize (30 "
+ "ms)\n");
exit(0);
}
break;
@@ -1435,16 +1389,15 @@
if (sampfreq == 8000) {
ok = WebRtcGSMFR_CreateEnc(&GSMFRenc_inst[k]);
if (ok != 0) {
- printf(
- "Error: Couldn't allocate memory for GSM FR encoding "
- "instance\n");
+ printf("Error: Couldn't allocate memory for GSM FR encoding "
+ "instance\n");
exit(0);
}
if ((enc_frameSize == 160) || (enc_frameSize == 320) ||
(enc_frameSize == 480)) {
} else {
- printf(
- "\nError - GSM FR must have a multiple of 160 enc_frameSize\n");
+ printf("\nError - GSM FR must have a multiple of 160 "
+ "enc_frameSize\n");
exit(0);
}
WebRtcGSMFR_EncoderInit(GSMFRenc_inst[k], 0);