hardware/ikalogic-scanalogic2/api.c

/*
 * This file is part of the libsigrok project.
 *
 * Copyright (C) 2013 Marc Schink <sigrok-dev@marcschink.de>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "protocol.h"

static const int hwcaps[] = {
	SR_CONF_LOGIC_ANALYZER,
	SR_CONF_SAMPLERATE,
	SR_CONF_LIMIT_SAMPLES,
	SR_CONF_TRIGGER_TYPE,
	SR_CONF_CAPTURE_RATIO,
};

SR_PRIV const uint64_t ikalogic_scanalogic2_samplerates[NUM_SAMPLERATES] = {
	SR_KHZ(1.25),
	SR_KHZ(10),
	SR_KHZ(50),
	SR_KHZ(100),
	SR_KHZ(250),
	SR_KHZ(500),
	SR_MHZ(1),
	SR_MHZ(2.5),
	SR_MHZ(5),
	SR_MHZ(10),
	SR_MHZ(20),
};

static const char *probe_names[NUM_PROBES + 1] = {
	"0", "1", "2", "3",
	NULL,
};

SR_PRIV struct sr_dev_driver ikalogic_scanalogic2_driver_info;
static struct sr_dev_driver *di = &ikalogic_scanalogic2_driver_info;

static int init(struct sr_context *sr_ctx)
{
	return std_init(sr_ctx, di, LOG_PREFIX);
}

static GSList *scan(GSList *options)
{
	GSList *usb_devices, *devices, *l;
	struct drv_context *drvc;
	struct sr_dev_inst *sdi;
	struct sr_probe *probe;
	struct dev_context *devc;
	struct sr_usb_dev_inst *usb;
	struct device_info dev_info;
	int ret, device_index, i;
	char *fw_ver_str;

	(void)options;

	devices = NULL;
	drvc = di->priv;
	drvc->instances = NULL;
	device_index = 0;

	usb_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, USB_VID_PID);

	if (usb_devices == NULL)
		return NULL;

	for (l = usb_devices; l; l = l->next) {
		usb = l->data;

		ret = ikalogic_scanalogic2_get_device_info(*usb, &dev_info);
		if (ret != SR_OK) {
			sr_warn("Failed to get device information.");
			sr_usb_dev_inst_free(usb);
			continue;
		}

		if (!(devc = g_try_malloc(sizeof(struct dev_context)))) {
			sr_err("Device instance malloc failed.");
			sr_usb_dev_inst_free(usb);
			continue;
		}

		if (!(devc->xfer_in = libusb_alloc_transfer(0))) {
			sr_err("Transfer malloc failed.");
			sr_usb_dev_inst_free(usb);
			g_free(devc);
			continue;
		}

		if (!(devc->xfer_out = libusb_alloc_transfer(0))) {
			sr_err("Transfer malloc failed.");
			sr_usb_dev_inst_free(usb);
			libusb_free_transfer(devc->xfer_in);
			g_free(devc);
			continue;
		}

		fw_ver_str = g_strdup_printf("%u.%u", dev_info.fw_ver_major,
			dev_info.fw_ver_minor);
		if (!fw_ver_str) {
			sr_err("Firmware string malloc failed.");
			sr_usb_dev_inst_free(usb);
			libusb_free_transfer(devc->xfer_in);
			libusb_free_transfer(devc->xfer_out);
			g_free(devc);
			continue;
		}

		sdi = sr_dev_inst_new(device_index, SR_ST_INACTIVE, VENDOR_NAME,
			MODEL_NAME, fw_ver_str);
		g_free(fw_ver_str);
		if (!sdi) {
			sr_err("sr_dev_inst_new failed.");
			sr_usb_dev_inst_free(usb);
			libusb_free_transfer(devc->xfer_in);
			libusb_free_transfer(devc->xfer_out);
			g_free(devc);
			continue;
		}

		sdi->priv = devc;
		sdi->driver = di;
		sdi->inst_type = SR_INST_USB;
		sdi->conn = usb;

		for (i = 0; probe_names[i]; i++) {
			probe = sr_probe_new(i, SR_PROBE_LOGIC, TRUE,
				probe_names[i]);
			sdi->probes = g_slist_append(sdi->probes, probe);
			devc->probes[i] = probe;
		}

		devc->state = STATE_IDLE;
		devc->next_state = STATE_IDLE;

		/* Set default samplerate. */
		ikalogic_scanalogic2_set_samplerate(sdi, DEFAULT_SAMPLERATE);

		/* Set default capture ratio. */
		devc->capture_ratio = 0;

		/* Set default after trigger delay. */
		devc->after_trigger_delay = 0;

		memset(devc->xfer_buf_in, 0, LIBUSB_CONTROL_SETUP_SIZE +
			PACKET_LENGTH);
		memset(devc->xfer_buf_out, 0, LIBUSB_CONTROL_SETUP_SIZE +
			PACKET_LENGTH);

		libusb_fill_control_setup(devc->xfer_buf_in,
			USB_REQUEST_TYPE_IN, USB_HID_SET_REPORT,
			USB_HID_REPORT_TYPE_FEATURE, USB_INTERFACE,
			PACKET_LENGTH);
		libusb_fill_control_setup(devc->xfer_buf_out,
			USB_REQUEST_TYPE_OUT, USB_HID_SET_REPORT,
			USB_HID_REPORT_TYPE_FEATURE, USB_INTERFACE,
			PACKET_LENGTH);

		devc->xfer_data_in = devc->xfer_buf_in +
			LIBUSB_CONTROL_SETUP_SIZE;
		devc->xfer_data_out = devc->xfer_buf_out +
			LIBUSB_CONTROL_SETUP_SIZE;

		drvc->instances = g_slist_append(drvc->instances, sdi);
		devices = g_slist_append(devices, sdi);

		device_index++;
	}

	g_slist_free(usb_devices);

	return devices;
}

static GSList *dev_list(void)
{
	return ((struct drv_context *)(di->priv))->instances;
}

static void clear_dev_context(void *priv)
{
	struct dev_context *devc;

	devc = priv;

	sr_dbg("Device context cleared.");

	libusb_free_transfer(devc->xfer_in);
	libusb_free_transfer(devc->xfer_out);
	g_free(devc);
}

static int dev_clear(void)
{
	return std_dev_clear(di, &clear_dev_context);
}

static int dev_open(struct sr_dev_inst *sdi)
{
	struct drv_context *drvc;
	struct dev_context *devc;
	struct sr_usb_dev_inst *usb;
	uint8_t buffer[PACKET_LENGTH];
	int ret;

	if (!(drvc = di->priv)) {
		sr_err("Driver was not initialized.");
		return SR_ERR;
	}

	usb = sdi->conn;
	devc = sdi->priv;

	if (sr_usb_open(drvc->sr_ctx->libusb_ctx, usb) != SR_OK)
		return SR_ERR;

	/*
	 * Determine if a kernel driver is active on this interface and, if so,
	 * detach it.
	 */
	if (libusb_kernel_driver_active(usb->devhdl, USB_INTERFACE) == 1) {
		ret = libusb_detach_kernel_driver(usb->devhdl, USB_INTERFACE);
		if (ret < 0) {
			sr_err("Failed to detach kernel driver: %i.",
				libusb_error_name(ret));
			return SR_ERR;
		}
	}

	ret = libusb_claim_interface(usb->devhdl, USB_INTERFACE);
	if (ret) {
		sr_err("Failed to claim interface: %s.",
			libusb_error_name(ret));
		return SR_ERR;
	}

	libusb_fill_control_transfer(devc->xfer_in, usb->devhdl,
		devc->xfer_buf_in, ikalogic_scanalogic2_receive_transfer_in,
		sdi, USB_TIMEOUT);

	libusb_fill_control_transfer(devc->xfer_out, usb->devhdl,
		devc->xfer_buf_out, ikalogic_scanalogic2_receive_transfer_out,
		sdi, USB_TIMEOUT);

	memset(buffer, 0, sizeof(buffer));

	buffer[0] = CMD_RESET;
	ret = ikalogic_scanalogic2_transfer_out(usb->devhdl, buffer);
	if (ret != PACKET_LENGTH) {
		sr_err("Device reset failed: %s.", libusb_error_name(ret));
		return SR_ERR;
	}

	/*
	 * Set the device to idle state. If the device is not in idle state it
	 * possibly will reset itself after a few seconds without being used
	 * and thereby close the connection.
	 */
	buffer[0] = CMD_IDLE;
	ret = ikalogic_scanalogic2_transfer_out(usb->devhdl, buffer);
	if (ret != PACKET_LENGTH) {
		sr_err("Failed to set device in idle state: %s.",
			libusb_error_name(ret));
		return SR_ERR;
	}

	sdi->status = SR_ST_ACTIVE;

	return SR_OK;
}

static int dev_close(struct sr_dev_inst *sdi)
{
	struct sr_usb_dev_inst *usb;

	if (!di->priv) {
		sr_err("Driver was not initialized.");
		return SR_ERR;
	}

	usb = sdi->conn;

	if (!usb->devhdl)
		return SR_OK;

	libusb_release_interface(usb->devhdl, USB_INTERFACE);
	libusb_close(usb->devhdl);

	usb->devhdl = NULL;
	sdi->status = SR_ST_INACTIVE;

	return SR_OK;
}

static int cleanup(void)
{
	return dev_clear();
}

static int config_get(int key, GVariant **data, const struct sr_dev_inst *sdi)
{
	struct dev_context *devc;
	int ret;

	ret = SR_OK;
	devc = sdi->priv;

	switch (key) {
	case SR_CONF_SAMPLERATE:
		*data = g_variant_new_uint64(devc->samplerate);
		break;
	case SR_CONF_CAPTURE_RATIO:
		*data = g_variant_new_uint64(devc->capture_ratio);
		break;
	default:
		return SR_ERR_NA;
	}

	return ret;
}

static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi)
{
	uint64_t samplerate, limit_samples, capture_ratio;
	int ret;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	ret = SR_OK;

	switch (key) {
	case SR_CONF_LIMIT_SAMPLES:
		limit_samples = g_variant_get_uint64(data);
		ret = ikalogic_scanalogic2_set_limit_samples(sdi,
			limit_samples);
		break;
	case SR_CONF_SAMPLERATE:
		samplerate = g_variant_get_uint64(data);
		ret = ikalogic_scanalogic2_set_samplerate(sdi, samplerate);
		break;
	case SR_CONF_CAPTURE_RATIO:
		capture_ratio = g_variant_get_uint64(data);
		ret = ikalogic_scanalogic2_set_capture_ratio(sdi,
			capture_ratio);
		break;
	default:
		return SR_ERR_NA;
	}

	return ret;
}

static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi)
{
	GVariant *gvar;
	GVariantBuilder gvb;
	int ret;

	(void)sdi;

	ret = SR_OK;

	switch (key) {
	case SR_CONF_DEVICE_OPTIONS:
		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32, hwcaps,
			ARRAY_SIZE(hwcaps), sizeof(int32_t));
		break;
	case SR_CONF_SAMPLERATE:
		g_variant_builder_init(&gvb, G_VARIANT_TYPE("a{sv}"));
		gvar = g_variant_new_fixed_array(G_VARIANT_TYPE("t"),
			ikalogic_scanalogic2_samplerates,
			ARRAY_SIZE(ikalogic_scanalogic2_samplerates),
			sizeof(uint64_t));
		g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
		*data = g_variant_builder_end(&gvb);
		break;
	case SR_CONF_TRIGGER_TYPE:
		*data = g_variant_new_string(TRIGGER_TYPES);
		break;
	default:
		return SR_ERR_NA;
	}

	return ret;
}

static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
	const struct libusb_pollfd **pfd;
	struct drv_context *drvc;
	struct dev_context *devc;
	uint16_t trigger_bytes, tmp;
	unsigned int i, j;
	int ret;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	devc = sdi->priv;
	drvc = di->priv;

	devc->cb_data = cb_data;
	devc->wait_data_ready_locked = TRUE;
	devc->stopping_in_progress = FALSE;
	devc->transfer_error = FALSE;
	devc->samples_processed = 0;
	devc->channel = 0;
	devc->sample_packet = 0;

	/*
	 * The trigger must be configured first because the calculation of the
	 * pre and post trigger samples depends on a configured trigger.
	 */
	ikalogic_scanalogic2_configure_trigger(sdi);
	ikalogic_scanalogic2_calculate_trigger_samples(sdi);

	trigger_bytes = devc->pre_trigger_bytes + devc->post_trigger_bytes;

	/* Calculate the number of expected sample packets. */
	devc->num_sample_packets = trigger_bytes / PACKET_NUM_SAMPLE_BYTES;

	/* Round up the number of expected sample packets. */
	if (trigger_bytes % PACKET_NUM_SAMPLE_BYTES != 0)
		devc->num_sample_packets++;

	devc->num_enabled_probes = 0;

	/*
	 * Count the number of enabled probes and number them for a sequential
	 * access.
	 */
	for (i = 0, j = 0; i < NUM_PROBES; i++) {
		if (devc->probes[i]->enabled) {
			devc->num_enabled_probes++;
			devc->probe_map[j] = i;
			j++;
		}
	}

	sr_dbg("Number of enabled probes: %i.", devc->num_enabled_probes);

	/* Set up the transfer buffer for the acquisition. */
	devc->xfer_data_out[0] = CMD_SAMPLE;
	devc->xfer_data_out[1] = 0x00;

	tmp = GUINT16_TO_LE(devc->pre_trigger_bytes);
	memcpy(devc->xfer_data_out + 2, &tmp, sizeof(tmp));

	tmp = GUINT16_TO_LE(devc->post_trigger_bytes);
	memcpy(devc->xfer_data_out + 4, &tmp, sizeof(tmp));

	devc->xfer_data_out[6] = devc->samplerate_id;
	devc->xfer_data_out[7] = devc->trigger_type;
	devc->xfer_data_out[8] = devc->trigger_channel;
	devc->xfer_data_out[9] = 0x00;

	tmp = GUINT16_TO_LE(devc->after_trigger_delay);
	memcpy(devc->xfer_data_out + 10, &tmp, sizeof(tmp));

	if (!(pfd = libusb_get_pollfds(drvc->sr_ctx->libusb_ctx))) {
		sr_err("libusb_get_pollfds failed.");
		return SR_ERR;
	}

	/* Count the number of file descriptors. */
	for (devc->num_usbfd = 0; pfd[devc->num_usbfd]; devc->num_usbfd++);

	if (!(devc->usbfd = g_try_malloc(devc->num_usbfd * sizeof(int)))) {
		sr_err("File descriptor array malloc failed.");
		free(pfd);
		return SR_ERR_MALLOC;
	}

	if ((ret = libusb_submit_transfer(devc->xfer_out)) != 0) {
		sr_err("Submit transfer failed: %s.", libusb_error_name(ret));
		g_free(devc->usbfd);
		return SR_ERR;
	}

	for (i = 0; i < devc->num_usbfd; i++) {
		sr_source_add(pfd[i]->fd, pfd[i]->events, 100,
			ikalogic_scanalogic2_receive_data, (void *)sdi);

		devc->usbfd[i] = pfd[i]->fd;
	}

	free(pfd);

	sr_dbg("Acquisition started successfully.");

	/* Send header packet to the session bus. */
	std_session_send_df_header(cb_data, LOG_PREFIX);

	devc->next_state = STATE_SAMPLE;

	return SR_OK;
}

static int dev_acquisition_stop(struct sr_dev_inst *sdi, void *cb_data)
{
	(void)cb_data;

	if (sdi->status != SR_ST_ACTIVE)
		return SR_ERR_DEV_CLOSED;

	sr_dbg("Stopping acquisition.");

	sdi->status = SR_ST_STOPPING;

	return SR_OK;
}

SR_PRIV struct sr_dev_driver ikalogic_scanalogic2_driver_info = {
	.name = "ikalogic-scanalogic2",
	.longname = "IKALOGIC Scanalogic-2",
	.api_version = 1,
	.init = init,
	.cleanup = cleanup,
	.scan = scan,
	.dev_list = dev_list,
	.dev_clear = dev_clear,
	.config_get = config_get,
	.config_set = config_set,
	.config_list = config_list,
	.dev_open = dev_open,
	.dev_close = dev_close,
	.dev_acquisition_start = dev_acquisition_start,
	.dev_acquisition_stop = dev_acquisition_stop,
	.priv = NULL,
};