server/hosts/servo_host.py

# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.
#
# Expects to be run in an environment with sudo and no interactive password
# prompt, such as within the Chromium OS development chroot.


"""This file provides core logic for servo verify/repair process."""


import logging
import os
import re
import tarfile
import time
import traceback
import xmlrpclib

from autotest_lib.client.bin import utils
from autotest_lib.client.common_lib import error
from autotest_lib.client.common_lib import hosts
from autotest_lib.client.common_lib import lsbrelease_utils
from autotest_lib.client.common_lib.cros import retry
from autotest_lib.client.common_lib.cros.network import ping_runner
from autotest_lib.server.cros.servo import servo
from autotest_lib.server.hosts import servo_repair
from autotest_lib.server.hosts import base_servohost
from autotest_lib.server.hosts import servo_constants
from autotest_lib.server.cros.faft.utils import config
from autotest_lib.client.common_lib import global_config

_CONFIG = global_config.global_config


class ServoHost(base_servohost.BaseServoHost):
    """Host class for a servo host(e.g. beaglebone, labstation)
     that with a servo instance for a specific port.

     @type _servo: servo.Servo | None
     """

    DEFAULT_PORT = int(os.getenv('SERVOD_PORT', '9999'))

    # Timeout for initializing servo signals.
    INITIALIZE_SERVO_TIMEOUT_SECS = 60

    # Ready test function
    SERVO_READY_METHOD = 'get_version'

    # Directory prefix on the servo host where the servod logs are stored.
    SERVOD_LOG_PREFIX = '/var/log/servod'

    # Exit code to use when symlinks for servod logs are not found.
    NO_SYMLINKS_CODE = 9

    # Directory in the job's results directory to dump the logs into.
    LOG_DIR = 'servod'

    # Prefix for joint loglevel files in the logs.
    JOINT_LOG_PREFIX = 'log'

    # Regex group to extract timestamp from logfile name.
    TS_GROUP = 'ts'

    # This regex is used to extract the timestamp from servod logs.
             # files always start with log.
    TS_RE = (r'log.'
             # The timestamp is of format %Y-%m-%d--%H-%M-%S.MS
             r'(?P<%s>\d{4}(\-\d{2}){2}\-(-\d{2}){3}.\d{3})'
             # The loglevel is optional depending on labstation version.
             r'(.(INFO|DEBUG|WARNING))?' % TS_GROUP)
    TS_EXTRACTOR = re.compile(TS_RE)

    # Regex group to extract MCU name from logline in servod logs.
    MCU_GROUP = 'mcu'

    # Regex group to extract logline from MCU logline in servod logs.
    LINE_GROUP = 'line'

    # This regex is used to extract the mcu and the line content from an
    # MCU logline in servod logs. e.g. EC or servo_v4 console logs.
    # Here is an example log-line:
    #
    # 2020-01-23 13:15:12,223 - servo_v4 - EC3PO.Console - DEBUG -
    # console.py:219:LogConsoleOutput - /dev/pts/9 - cc polarity: cc1
    #
    # Here is conceptually how they are formatted:
    #
    #  <time> - <MCU> - EC3PO.Console - <LVL> - <file:line:func> - <pts> -
    #  <output>
    #
              # The log format starts with a timestamp
    MCU_RE = (r'[\d\-]+ [\d:,]+ '
              # The mcu that is logging this is next.
              r'- (?P<%s>\w+) - '
              # Next, we have more log outputs before the actual line.
              # Information about the file line, logging function etc.
              # Anchor on EC3PO Console, LogConsoleOutput and dev/pts.
              # NOTE: if the log format changes, this regex needs to be
              # adjusted.
              r'EC3PO\.Console[\s\-\w\d:.]+LogConsoleOutput - /dev/pts/\d+ - '
              # Lastly, we get the MCU's console line.
              r'(?P<%s>.+$)' % (MCU_GROUP, LINE_GROUP))
    MCU_EXTRACTOR = re.compile(MCU_RE)

    # Suffix to identify compressed logfiles.
    COMPRESSION_SUFFIX = '.tbz2'

    # A suffix to mark servod log directories that came from instance that
    # ran during this servo_host, but are not the last one running e.g. when
    # an instance (on purpose, or due to a bug) restarted in the middle of the
    # run.
    OLD_LOG_SUFFIX = 'old'

    def _init_attributes(self):
        self._servo_state = None
        self.servo_port = None
        self.servo_board = None
        self.servo_model = None
        self.servo_serial = None
        # The flag that indicate if a servo is connected to a smart usbhub.
        # TODO(xianuowang@) remove this flag once all usbhubs in the lab
        # get replaced.
        self.smart_usbhub = None
        self._servo = None
        self._servod_server_proxy = None
        self._initial_instance_ts = None
        # Flag to make sure that multiple calls to close do not result in the
        # logic executing multiple times.
        self._closed = False

    def _initialize(self, servo_host='localhost',
                    servo_port=DEFAULT_PORT, servo_board=None,
                    servo_model=None, servo_serial=None, is_in_lab=None,
                    *args, **dargs):
        """Initialize a ServoHost instance.

        A ServoHost instance represents a host that controls a servo.

        @param servo_host: Name of the host where the servod process
                           is running.
        @param servo_port: Port the servod process is listening on. Defaults
                           to the SERVOD_PORT environment variable if set,
                           otherwise 9999.
        @param servo_board: Board that the servo is connected to.
        @param servo_model: Model that the servo is connected to.
        @param is_in_lab: True if the servo host is in Cros Lab. Default is set
                          to None, for which utils.host_is_in_lab_zone will be
                          called to check if the servo host is in Cros lab.

        """
        super(ServoHost, self)._initialize(hostname=servo_host,
                                           is_in_lab=is_in_lab, *args, **dargs)
        self._init_attributes()
        self.servo_port = int(servo_port)
        self.servo_board = servo_board
        self.servo_model = servo_model
        self.servo_serial = servo_serial

        # The location of the log files on the servo host for this instance.
        self.remote_log_dir = '%s_%s' % (self.SERVOD_LOG_PREFIX,
                                         self.servo_port)
        # Path of the servo host lock file.
        self._lock_file = (self.TEMP_FILE_DIR + str(self.servo_port)
                           + self.LOCK_FILE_POSTFIX)
        # File path to declare a reboot request.
        self._reboot_file = (self.TEMP_FILE_DIR + str(self.servo_port)
                             + self.REBOOT_FILE_POSTFIX)

        # Lock the servo host if it's an in-lab labstation to prevent other
        # task to reboot it until current task completes. We also wait and
        # make sure the labstation is up here, in the case of the labstation is
        # in the middle of reboot.
        self._is_locked = False
        if (self.wait_up(self.REBOOT_TIMEOUT) and self.is_in_lab()
            and self.is_labstation()):
            self._lock()

        self._repair_strategy = (
                servo_repair.create_servo_repair_strategy())

    def __str__(self):
        return "<%s '%s:%s'>" % (
                type(self).__name__, self.hostname, self.servo_port)

    def connect_servo(self):
        """Establish a connection to the servod server on this host.

        Initializes `self._servo` and then verifies that all network
        connections are working.  This will create an ssh tunnel if
        it's required.

        As a side effect of testing the connection, all signals on the
        target servo are reset to default values, and the USB stick is
        set to the neutral (off) position.
        """
        servo_obj = servo.Servo(servo_host=self, servo_serial=self.servo_serial)
        self._servo = servo_obj
        timeout, _ = retry.timeout(
                servo_obj.initialize_dut,
                timeout_sec=self.INITIALIZE_SERVO_TIMEOUT_SECS)
        if timeout:
            raise hosts.AutoservVerifyError(
                    'Servo initialize timed out.')


    def disconnect_servo(self):
        """Disconnect our servo if it exists.

        If we've previously successfully connected to our servo,
        disconnect any established ssh tunnel, and set `self._servo`
        back to `None`.
        """
        if self._servo:
            # N.B. This call is safe even without a tunnel:
            # rpc_server_tracker.disconnect() silently ignores
            # unknown ports.
            self.rpc_server_tracker.disconnect(self.servo_port)
            self._servo = None


    def _create_servod_server_proxy(self):
        """Create a proxy that can be used to communicate with servod server.

        @returns: An xmlrpclib.ServerProxy that is connected to the servod
                  server on the host.
        """
        if (servo_constants.ENABLE_SSH_TUNNEL_FOR_SERVO
                and not self.is_localhost()):
            return self.rpc_server_tracker.xmlrpc_connect(
                    None, self.servo_port,
                    ready_test_name=self.SERVO_READY_METHOD,
                    timeout_seconds=60,
                    request_timeout_seconds=3600,
                    server_desc=str(self))
        else:
            remote = 'http://%s:%s' % (self.hostname, self.servo_port)
            return xmlrpclib.ServerProxy(remote)


    def get_servod_server_proxy(self):
        """Return a cached proxy if exists; otherwise, create a new one.

        @returns: An xmlrpclib.ServerProxy that is connected to the servod
                  server on the host.
        """
        # Single-threaded execution, no race
        if self._servod_server_proxy is None:
            self._servod_server_proxy = self._create_servod_server_proxy()
        return self._servod_server_proxy


    def verify(self, silent=False):
        """Update the servo host and verify it's in a good state.

        @param silent   If true, suppress logging in `status.log`.
        """
        message = 'Beginning verify for servo host %s port %s serial %s'
        message %= (self.hostname, self.servo_port, self.servo_serial)
        self.record('INFO', None, None, message)
        try:
            self._repair_strategy.verify(self, silent)
            self._servo_state = servo_constants.SERVO_STATE_WORKING
            self.record('INFO', None, None,
                        'ServoHost verify set servo_state as WORKING')
        except Exception as e:
            self._servo_state = servo_constants.SERVO_STATE_BROKEN
            self.record('INFO', None, None,
                        'ServoHost verify set servo_state as BROKEN')
            if self._is_critical_error(e):
                raise


    def get_image_name_from_usbkey(self, usbkey_dev):
        """Mount usb drive and check ChromeOS image name on it if there is
        one. This method assumes the image_usbkey_direction is already set
        to servo side.

        @param: usbkey_dev  usbkey dev path(e.g. /dev/sdb).

        @returns: image_name on the usbkey, e.g. nami-release/R82.10138.0.0,
                  or empty string if no test image detected, or unexpected
                  error occurred.
        """
        logging.info('Checking ChromeOS image name on usbkey.')
        usb_mount_path = '/media/servo_usb/%s' % self.servo_port
        unmount_cmd = 'umount %s' % usb_mount_path
        # ChromeOS root fs is in /dev/sdx3
        mount_cmd = 'mount -o ro %s3 %s' % (usbkey_dev, usb_mount_path)
        # Unmount if there is an existing stale mount.
        self.run(unmount_cmd, ignore_status=True)
        # Create if the mount point is not existing.
        self.run('mkdir -p %s' % usb_mount_path)
        try:
            # Attempt to mount the usb drive.
            mount_result = self.run(mount_cmd, ignore_status=True)
            if mount_result.exit_status != 0:
                logging.error('Unexpected error occurred on mount usb drive.')
                return ''

            release_content = self.run(
                'cat %s/etc/lsb-release' % usb_mount_path,
                ignore_status=True).stdout.strip()

            if not re.search(r'RELEASE_TRACK=.*test', release_content):
                logging.info('The image on usbkey is not a test image')
                return ''

            return lsbrelease_utils.get_chromeos_release_builder_path(
                lsb_release_content=release_content)
        finally:
            logging.debug('Image check compeleted, unmounting the usb drive.')
            self.run(unmount_cmd, ignore_status=True)


    def _probe_and_validate_usb_dev(self):
        """This method probe the usb dev path by talking to servo, and then
        validate the dev path is valid block device to servohost.
        Possible output:
        1. Encounter error during probe usb dev, returns empty string.
        2. probe usb dev completed without error but cannot find usb dev,
           raise AutoservRepairError.
        3. probe usb dev find a usb dev path, but failed validation in this
           method, raise AutoservRepairError.

        @returns: A string of usb dev path(e.g. '/dev/sdb'), or empty string
        if unexpected error occurred during probe.
        @raises: AutoservRepairError if servo couldn't probe the usb dev path
        (servo.probe_host_usb_dev() returns empty string), or the dev path is
        not valid block device to servohost.
        """
        logging.info('Validating image usbkey on servo.')
        try:
            usb_dev = self._servo.probe_host_usb_dev()
        except Exception as e:
            # We don't want any unexpected or transient servo communicating
            # failure block usb repair, so capture all errors here.
            logging.error(e, exc_info=True)
            logging.error('Unexpected error occurred on get usbkey dev path,'
                          ' skipping usbkey validation.')
            return ''

        if usb_dev:
            # probe_host_usb_dev() sometimes return stale record,
            # so we need to make sure the path exists in fdisk.
            validate_cmd = 'fdisk -l | grep %s' % usb_dev
            resp = self.run(validate_cmd, ignore_status=True)
            if resp.exit_status == 0:
                return usb_dev

            logging.error('%s is reported from "image_usbkey_dev" control but'
                          ' not detected from fdisk!', usb_dev)

        raise hosts.AutoservRepairError(
              'No usbkey detected on servo, the usbkey may be either missing'
              ' or broken. Please replace usbkey on the servo and retry.',
              'missing usbkey')


    def is_ec_supported(self):
        """Check if ec is supported on the servo_board"""
        if self.servo_board:
            try:
                frm_config = config.Config(self.servo_board, self.servo_model)
                return frm_config.chrome_ec
            except Exception as e:
                logging.error('Unexpected error when read from firmware'
                    ' configs; %s', str(e))
        return False

    def validate_image_usbkey(self):
        """This method first validate if there is a recover usbkey on servo
        that accessible to servohost, and second check if a ChromeOS image is
        already on the usb drive and return the image_name so we can avoid
        unnecessary download and flash to the recover usbkey on servo.

        Please note that, there is special error handling logic here:
        1. If unexpected error happens, we return empty string. So repair
           actions will not get blocked.
        2. If no working usbkey present on servo, but no errors, we'll raise
           AutoservRepairError here.

        @returns: image_name on the usbkey, e.g. nami-release/R82.10138.0.0,
                  or empty string if no test image detected, or unexpected
                  error occurred.
        @raises:  AutoservRepairError if the usbkey is not detected on servo.
        """
        usb_dev = self._probe_and_validate_usb_dev()
        if usb_dev:
            return self.get_image_name_from_usbkey(usb_dev)
        else:
            return ''


    def repair(self, silent=False):
        """Attempt to repair servo host.

        @param silent   If true, suppress logging in `status.log`.
        """
        message = 'Beginning repair for servo host %s port %s serial %s'
        message %= (self.hostname, self.servo_port, self.servo_serial)
        self.record('INFO', None, None, message)
        try:
            self._repair_strategy.repair(self, silent)
            self._servo_state = servo_constants.SERVO_STATE_WORKING
            self.record('INFO', None, None,
                        'ServoHost repair set servo_state as WORKING')
            # If target is a labstation then try to withdraw any existing
            # reboot request created by this servo because it passed repair.
            if self.is_labstation():
                self.withdraw_reboot_request()
        except Exception as e:
            self._servo_state = servo_constants.SERVO_STATE_BROKEN
            self.record('INFO', None, None,
                        'ServoHost repair set servo_state as BROKEN')
            if self._is_critical_error(e):
                self.disconnect_servo()
                self.stop_servod()
                raise


    def _is_critical_error(self, error):
        if (isinstance(error, hosts.AutoservVerifyDependencyError)
            and not error.is_critical()):
            logging.warning('Non-critical verify failure(s) detected during'
                            ' verify/repair servo, servo connection will'
                            ' still up but may not fully functional.'
                            ' Some repair actions and servo depended'
                            ' tests may not run.')
            return False
        logging.info('Critical verify failure(s) detected during repair/verify'
                     ' servo. Disconnecting servo and stop servod, all repair '
                     'action and tests that depends on servo will not run.')
        return True


    def get_servo(self):
        """Get the cached servo.Servo object.

        @return: a servo.Servo object.
        @rtype: autotest_lib.server.cros.servo.servo.Servo
        """
        return self._servo


    def request_reboot(self):
        """Request servohost to be rebooted when it's safe to by touch a file.
        """
        logging.debug('Request to reboot servohost %s has been created by '
                      'servo with port # %s', self.hostname, self.servo_port)
        self.run('touch %s' % self._reboot_file, ignore_status=True)


    def withdraw_reboot_request(self):
        """Withdraw a servohost reboot request if exists by remove the flag
        file.
        """
        logging.debug('Withdrawing request to reboot servohost %s that created'
                      ' by servo with port # %s if exists.',
                      self.hostname, self.servo_port)
        self.run('rm -f %s' % self._reboot_file, ignore_status=True)


    def start_servod(self, quick_startup=False):
        """Start the servod process on servohost.
        """
        # Skip if running on the localhost.(crbug.com/1038168)
        if self.is_localhost():
            logging.debug("Servohost is a localhost, skipping start servod.")
            return

        cmd = 'start servod'
        if self.servo_board:
            cmd += ' BOARD=%s' % self.servo_board
            if self.servo_model:
                cmd += ' MODEL=%s' % self.servo_model
        else:
            logging.warning('Board for DUT is unknown; starting servod'
                            ' assuming a pre-configured board.')

        cmd += ' PORT=%d' % self.servo_port
        if self.servo_serial:
            cmd += ' SERIAL=%s' % self.servo_serial

        # Start servod with dual_v4 if the DUT/servo from designated pools.
        dut_host_info = self.get_dut_host_info()
        if dut_host_info:
            if bool(dut_host_info.pools &
                    servo_constants.POOLS_SUPPORT_DUAL_V4):
                logging.debug('The DUT is detected in following designated'
                              ' pools %s,starting servod with DUAL_V4 option.',
                              servo_constants.POOLS_SUPPORT_DUAL_V4)
                cmd += ' DUAL_V4=1'

        # Remove the symbolic links from the logs. This helps ensure that
        # a failed servod instantiation does not cause us to grab old logs
        # by mistake.
        self.remove_latest_log_symlinks()
        self.run(cmd, timeout=60)

        # There's a lag between when `start servod` completes and when
        # the _ServodConnectionVerifier trigger can actually succeed.
        # The call to time.sleep() below gives time to make sure that
        # the trigger won't fail after we return.

        # Normally servod on servo_v3 and labstation take ~10 seconds to ready,
        # But in the rare case all servo on a labstation are in heavy use they
        # may take ~30 seconds. So the timeout value will double these value,
        # and we'll try quick start up when first time initialize servohost,
        # and use standard start up timeout in repair.
        if quick_startup:
            timeout = servo_constants.SERVOD_QUICK_STARTUP_TIMEOUT
        else:
            timeout = servo_constants.SERVOD_STARTUP_TIMEOUT
        logging.debug('Wait %s seconds for servod process fully up.', timeout)
        time.sleep(timeout)
        # Cache the initial instance timestamp to check against servod restarts
        self._initial_instance_ts = self.get_instance_logs_ts()


    def stop_servod(self):
        """Stop the servod process on servohost.
        """
        # Skip if running on the localhost.(crbug.com/1038168)
        if self.is_localhost():
            logging.debug("Servohost is a localhost, skipping stop servod.")
            return

        logging.debug('Stopping servod on port %s', self.servo_port)
        self.run('stop servod PORT=%d' % self.servo_port,
                 timeout=60, ignore_status=True)
        logging.debug('Wait %s seconds for servod process fully teardown.',
                      servo_constants.SERVOD_TEARDOWN_TIMEOUT)
        time.sleep(servo_constants.SERVOD_TEARDOWN_TIMEOUT)


    def restart_servod(self, quick_startup=False):
        """Restart the servod process on servohost.
        """
        self.stop_servod()
        self.start_servod(quick_startup)


    def _process_servodtool_error(self, response):
        """Helper function to handle non-zero servodtool response.
        """
        if re.search(servo_constants.ERROR_MESSAGE_USB_HUB_NOT_COMPATIBLE,
                     response.stderr):
            logging.error('The servo is not plugged on a usb hub that supports'
                          ' power-cycle!')
            # change the flag so we can update this label in later process.
            self.smart_usbhub = False
            return

        if re.search(servo_constants.ERROR_MESSAGE_DEVICE_NOT_FOUND %
                     self.servo_serial, response.stdout):
            logging.error('No servo with serial %s found!', self.servo_serial)
            return

        logging.error('Unexpected error occurred from usbhub control, please'
                      ' file a bug and inform chrome-fleet-software@ team!')


    def _get_servo_usb_devnum(self):
        """Helper function to collect current usb devnum of servo.
        """
        resp = self.run('servodtool device -s %s usb-path' % self.servo_serial,
                        ignore_status=True)
        if resp.exit_status != 0:
            self._process_servodtool_error(resp)
            return ''
        usb_path = resp.stdout.strip()
        logging.info('Usb path of servo %s is %s', self.servo_serial, usb_path)

        resp = self.run('cat %s/devnum' % usb_path,
                        ignore_status=True)
        if resp.exit_status != 0:
            self._process_servodtool_error(resp)
            return ''
        return resp.stdout.strip()


    def _reset_servo(self):
        logging.info('Resetting servo through smart usbhub.')
        resp = self.run('servodtool device -s %s power-cycle' %
                        self.servo_serial, ignore_status=True)
        if resp.exit_status != 0:
            self._process_servodtool_error(resp)
            return False

        logging.debug('Wait %s seconds for servo to come back from reset.',
                      servo_constants.SERVO_RESET_TIMEOUT_SECONDS)
        time.sleep(servo_constants.SERVO_RESET_TIMEOUT_SECONDS)
        # change the flag so we can update this label in later process.
        self.smart_usbhub = True
        return True


    def reset_servo(self):
        """Reset(power-cycle) the servo via smart usbhub.
        """
        if not self.is_labstation():
            logging.info('Servo reset is not applicable to servo_v3.')
            return

        pre_reset_devnum = self._get_servo_usb_devnum()
        logging.info('Servo usb devnum before reset: %s', pre_reset_devnum)
        result = self._reset_servo()
        if not result:
            message = ('Failed to reset servo with serial: %s'
                       % self.servo_serial)
            logging.warning(message)
            self.record('INFO', None, None, message)
            return

        post_reset_devnum = self._get_servo_usb_devnum()
        logging.info('Servo usb devnum after reset: %s', post_reset_devnum)
        if not (pre_reset_devnum and post_reset_devnum):
            message = ('Servo reset completed but unable to verify'
                       ' devnum change!')
        elif pre_reset_devnum != post_reset_devnum:
            message = ('Reset servo with serial %s completed successfully!'
                       % self.servo_serial)
        else:
            message = 'Servo reset completed but devnum is still not changed!'
        logging.info(message)
        self.record('INFO', None, None, message)


    def _extract_compressed_logs(self, logdir, relevant_files):
        """Decompress servod logs in |logdir|.

        @param logdir: directory containing compressed servod logs.
        @param relevant_files: list of files in |logdir| to consider.

        @returns: tuple, (tarfiles, files) where
                  tarfiles: list of the compressed filenames that have been
                            extracted and deleted
                  files:  list of the uncompressed files that were generated
        """
        # For all tar-files, first extract them to the directory, and
        # then let the common flow handle them.
        tarfiles = [cf for cf in relevant_files if
                    cf.endswith(self.COMPRESSION_SUFFIX)]
        files = []
        for f in tarfiles:
            norm_name = os.path.basename(f)[:-len(self.COMPRESSION_SUFFIX)]
            with tarfile.open(f) as tf:
                # Each tarfile has only one member, as
                # that's the compressed log.
                member = tf.members[0]
                # Manipulate so that it only extracts the basename, and not
                # the directories etc.
                member.name = norm_name
                files.append(os.path.join(logdir, member.name))
                tf.extract(member, logdir)
            # File has been extracted: remove the compressed file.
            os.remove(f)
        return tarfiles, files

    def _extract_mcu_logs(self, log_subdir):
        """Extract MCU (EC, Cr50, etc) console output from servod debug logs.

        Using the MCU_EXTRACTOR regex (above) extract and split out MCU console
        lines from the logs to generate invidiual console logs e.g. after
        this method, you can find an ec.txt and servo_v4.txt in |log_dir| if
        those MCUs had any console input/output.

        @param log_subdir: directory with log.DEBUG.txt main servod debug logs.
        """
        # Extract the MCU for each one. The MCU logs are only in the .DEBUG
        # files
        mcu_lines_file = os.path.join(log_subdir, 'log.DEBUG.txt')
        if not os.path.exists(mcu_lines_file):
            logging.info('No DEBUG logs found to extract MCU logs from.')
            return
        mcu_files = {}
        mcu_file_template = '%s.txt'
        with open(mcu_lines_file, 'r') as f:
            for line in f:
                match = self.MCU_EXTRACTOR.match(line)
                if match:
                    mcu = match.group(self.MCU_GROUP).lower()
                    line = match.group(self.LINE_GROUP)
                    if mcu not in mcu_files:
                        mcu_file = os.path.join(log_subdir,
                                                mcu_file_template % mcu)
                        mcu_files[mcu] = open(mcu_file, 'a')
                    fd = mcu_files[mcu]
                    fd.write(line + '\n')
        for f in mcu_files:
            mcu_files[f].close()


    def remove_latest_log_symlinks(self):
        """Remove the conveninence symlinks 'latest' servod logs."""
        symlink_wildcard = '%s/latest*' % self.remote_log_dir
        cmd = 'rm ' + symlink_wildcard
        self.run(cmd, stderr_tee=None, ignore_status=True)

    def probe_servod_restart(self, instance_ts, outdir):
        """Grab servod logs from previous instances if part of this session.

        If since the last time this host called start_servod() servod crashed
        and restarted, this helper finds those logs as well, and stores them
        with the |OLD_LOG_SUFFIX| to investigate if necessary.

        It also issues a panicinfo command to servo devices after the restart
        to try and collect reboot information for debugging.

        @param instance_ts: the log timestamp that the current instance uses
        @param outdir: directory to create a subdirectory into to place the
                       servod logs into.
        """
        if self._initial_instance_ts is None:
            logging.info('No log timestamp grabbed successfully on servod '
                         'startup. Cannot check device restarts. Ignoring.')
            return
        if instance_ts == self._initial_instance_ts:
            logging.debug('Servod appears to have run without restarting')
            return
        # Servod seems to have restarted (at least once). |_initial_instance_ts|
        # is the first timestamp, and instance_ts is the current timestamp. Find
        # all timestamps in between them, and grab the logs for each.
        tss = self._find_instance_timestamps_between(self._initial_instance_ts,
                                                     instance_ts)
        logging.info('Servod has restarted %d times between the start and the '
                     'end of this servo_host.', len(tss))
        logging.info('This might be an issue. Will extract all logs from each '
                     'instance.')
        logging.info('Logs that are not the currently running (about to turn '
                     'down) instance are maked with a .%s in their folder.',
                     self.OLD_LOG_SUFFIX)
        for ts in tss:
            self.get_instance_logs(ts, outdir, old=True)
        # Lastly, servod has restarted due to a potential issue. Try to get
        # panic information from servo micro and servo v4 for the current logs.
        # This can only happen if the |_servo| attribute is initialized.
        if self._servo:
            for mcu in ['servo_micro', 'servo_v4']:
                ctrl = '%s_uart_cmd' % mcu
                if self._servo.has_control(ctrl):
                    logging.info('Trying to retrieve %r panicinfo into logs',
                                 mcu)
                    try:
                        self._servo.set_nocheck(ctrl, 'panicinfo')
                    except error.TestFail as e:
                        logging.error('Failed to generate panicinfo for %r '
                                      'logs. %s', mcu, str(e))

    def _find_instance_timestamps_between(self, start_ts, end_ts):
        """Find all log timestamps between [start_ts, end_ts).

        @param start_ts: str, earliest log timestamp of interest
        @param end_ts: str, latest log timestamp of interest

        @returns: list, all timestamps between start_ts and end_ts, end_ts
                  exclusive, on the servo_host. An empty list on errors
        """
        # Simply get all timestamp, and then sort and remove
        cmd = 'ls %s' % self.remote_log_dir
        res = self.run(cmd, stderr_tee=None, ignore_status=True)
        if res.exit_status != 0:
            # Here we failed to find anything.
            logging.info('Failed to find remote servod logs. Ignoring.')
            return []
        logfiles = res.stdout.strip().split()
        timestamps = set()
        for logfile in logfiles:
            ts_match = self.TS_EXTRACTOR.match(logfile)
            if not ts_match:
                # Simply ignore files that fail the check. It might be the
                # 'latest' symlinks or random files.
                continue
            timestamps.add(ts_match.group(self.TS_GROUP))
        # At this point we have all unique timestamps.
        timestamps = sorted(timestamps)
        for ts in [start_ts, end_ts]:
            if ts not in timestamps:
                logging.error('Timestamp %r not in servod logs. Cannot query '
                              'for timestamps in between %r and %r', ts,
                              start_ts, end_ts)
                return []
        return timestamps[timestamps.index(start_ts):timestamps.index(end_ts)]

    def get_instance_logs_ts(self):
        """Retrieve the currently running servod instance's log timestamp

        @returns: str, timestamp for current instance, or None on failure
        """
        # First, extract the timestamp. This cmd gives the real filename of
        # the latest aka current log file.
        cmd = ('if [ -f %(dir)s/latest.DEBUG ];'
               'then realpath %(dir)s/latest.DEBUG;'
               'elif [ -f %(dir)s/latest ];'
               'then realpath %(dir)s/latest;'
               'else exit %(code)d;'
               'fi' % {'dir': self.remote_log_dir,
                       'code': self.NO_SYMLINKS_CODE})
        res = self.run(cmd, stderr_tee=None, ignore_status=True)
        if res.exit_status != 0:
            if res.exit_status == self.NO_SYMLINKS_CODE:
                logging.warning('servod log latest symlinks not found. '
                                'This is likely due to an error starting up '
                                'servod. Ignoring..')
            else:
                logging.warning('Failed to find servod logs on servo host.')
                logging.warning(res.stderr.strip())
            return None
        fname = os.path.basename(res.stdout.strip())
        # From the fname, ought to extract the timestamp using the TS_EXTRACTOR
        ts_match = self.TS_EXTRACTOR.match(fname)
        if not ts_match:
            logging.warning('Failed to extract timestamp from servod log file '
                            '%r. Skipping. The servo host is using outdated '
                            'servod logging and needs to be updated.', fname)
            return None
        return ts_match.group(self.TS_GROUP)

    def get_instance_logs(self, instance_ts, outdir, old=False):
        """Collect all logs with |instance_ts| and dump into a dir in |outdir|

        This method first collects all logs on the servo_host side pertaining
        to this servod instance (port, instatiation). It glues them together
        into combined log.[level].txt files and extracts all available MCU
        console I/O from the logs into individual files e.g. servo_v4.txt

        All the output can be found in a directory inside |outdir| that
        this generates based on |LOG_DIR|, the servod port, and the instance
        timestamp on the servo_host side.

        @param instance_ts: log timestamp to grab logfiles for
        @param outdir: directory to create a subdirectory into to place the
                       servod logs into.
        @param old: bool, whether to append |OLD_LOG_SUFFIX| to output dir
        """
        # Create the local results log dir.
        log_dir = os.path.join(outdir, '%s_%s.%s' % (self.LOG_DIR,
                                                     str(self.servo_port),
                                                     instance_ts))
        if old:
          log_dir = '%s.%s' % (log_dir, self.OLD_LOG_SUFFIX)
        logging.info('Saving servod logs to %r.', log_dir)
        os.mkdir(log_dir)
        # Now, get all files with that timestamp.
        cmd = 'find %s -maxdepth 1 -name "log.%s*"' % (self.remote_log_dir,
                                                       instance_ts)
        res = self.run(cmd, stderr_tee=None, ignore_status=True)
        files = res.stdout.strip().split()
        try:
            self.get_file(files, log_dir, try_rsync=False)
            if not os.listdir(log_dir):
                logging.info('No servod logs retrieved. Ignoring, and removing '
                             '%r again.', log_dir)
                os.rmdir(log_dir)
                return
        except error.AutoservRunError as e:
            result = e.result_obj
            if result.exit_status != 0:
                stderr = result.stderr.strip()
                logging.warning("Couldn't retrieve servod logs. Ignoring: %s",
                                stderr or '\n%s' % result)
            # Remove the log_dir as nothing was added to it.
            os.rmdir(log_dir)
            return
        local_files = [os.path.join(log_dir, f) for f in os.listdir(log_dir)]
        # TODO(crrev.com/c/1793030): remove no-level case once CL is pushed
        for level_name in ('DEBUG', 'INFO', 'WARNING', ''):
            # Create the joint files for each loglevel. i.e log.DEBUG
            joint_file = self.JOINT_LOG_PREFIX
            if level_name:
                joint_file = '%s.%s' % (self.JOINT_LOG_PREFIX, level_name)
            # This helps with some online tools to avoid complaints about an
            # unknown filetype.
            joint_file = joint_file + '.txt'
            joint_path = os.path.join(log_dir, joint_file)
            files = [f for f in local_files if level_name in f]
            if not files:
                # TODO(crrev.com/c/1793030): remove no-level case once CL
                # is pushed
                continue
            # Extract compressed logs if any.
            compressed, extracted = self._extract_compressed_logs(log_dir,
                                                                  files)
            files = list(set(files) - set(compressed))
            files.extend(extracted)
            # Need to sort. As they all share the same timestamp, and
            # loglevel, the index itself is sufficient. The highest index
            # is the oldest file, therefore we need a descending sort.
            def sortkey(f, level=level_name):
                """Custom sortkey to sort based on rotation number int."""
                if f.endswith(level_name): return 0
                return int(f.split('.')[-1])

            files.sort(reverse=True, key=sortkey)
            # Just rename the first file rather than building from scratch.
            os.rename(files[0], joint_path)
            with open(joint_path, 'a') as joint_f:
                for logfile in files[1:]:
                    # Transfer the file to the joint file line by line.
                    with open(logfile, 'r') as log_f:
                        for line in log_f:
                            joint_f.write(line)
                    # File has been written over. Delete safely.
                    os.remove(logfile)
            # Need to remove all files form |local_files| so we don't
            # analyze them again.
            local_files = list(set(local_files) - set(files) - set(compressed))
        # Lastly, extract MCU logs from the joint logs.
        self._extract_mcu_logs(log_dir)

    def _lock(self):
        """lock servohost by touching a file.
        """
        logging.debug('Locking servohost %s by touching %s file',
                      self.hostname, self._lock_file)
        self.run('touch %s' % self._lock_file, ignore_status=True)
        self._is_locked = True


    def _unlock(self):
        """Unlock servohost by removing the lock file.
        """
        logging.debug('Unlocking servohost by removing %s file',
                      self._lock_file)
        self.run('rm %s' % self._lock_file, ignore_status=True)
        self._is_locked = False


    def close(self):
        """Close the associated servo and the host object."""
        # NOTE: throughout this method there are multiple attempts to catch
        # all errors. This is WAI as log grabbing should not fail tests.
        # However, the goal is to catch and handle/process all errors, thus
        # we print the traceback and ask for a bug.
        if self._closed:
            logging.debug('ServoHost is already closed.')
            return
        instance_ts = self.get_instance_logs_ts()
        # TODO(crbug.com/1011516): once enabled, remove the check against
        # localhost and instead check against log-rotiation enablement.
        logs_available = (instance_ts is not None and
                          self.job and
                          not self.is_localhost())
        if logs_available:
            # Probe whether there was a servod restart, and grab those old
            # logs as well.
            try:
                self.probe_servod_restart(instance_ts, self.job.resultdir)
            except (error.AutoservRunError, error.TestFail) as e:
                logging.info('Failed to grab servo logs due to: %s. '
                             'This error is forgiven.', str(e))
            except Exception as e:
                logging.error('Unexpected error probing for old logs. %s. '
                              'Forgiven. Please file a bug and fix or catch '
                              'in log probing function', str(e),
                              exc_info=True)
        if self._servo:
            outdir = None if not self.job else self.job.resultdir
            # In some cases when we run as lab-tools, the job object is None.
            self._servo.close(outdir)

        if logs_available:
            # Grab current (not old like above) logs after the servo instance
            # was closed out.
            try:
                self.get_instance_logs(instance_ts, self.job.resultdir)
            except error.AutoservRunError as e:
                logging.info('Failed to grab servo logs due to: %s. '
                             'This error is forgiven.', str(e))
            except Exception as e:
                logging.error('Unexpected error grabbing servod logs. %s. '
                              'Forgiven. Please file a bug and fix or catch '
                              'in log grabbing function', str(e), exc_info=True)

        if self._is_locked:
            # Remove the lock if the servohost has been locked.
            try:
                self._unlock()
            except error.AutoservSSHTimeout:
                logging.error('Unlock servohost failed due to ssh timeout.'
                              ' It may caused by servohost went down during'
                              ' the task.')
        # We want always stop servod after task to minimum the impact of bad
        # servod process interfere other servods.(see crbug.com/1028665)
        try:
            self.stop_servod()
        except error.AutoservRunError as e:
            logging.info("Failed to stop servod due to:\n%s\n"
                         "This error is forgiven.", str(e))

        super(ServoHost, self).close()
        # Mark closed.
        self._closed = True


    def get_servo_state(self):
        if self._servo_state is None:
            return servo_constants.SERVO_STATE_UNKNOWN
        return self._servo_state


def make_servo_hostname(dut_hostname):
    """Given a DUT's hostname, return the hostname of its servo.

    @param dut_hostname: hostname of a DUT.

    @return hostname of the DUT's servo.

    """
    host_parts = dut_hostname.split('.')
    host_parts[0] = host_parts[0] + '-servo'
    return '.'.join(host_parts)


def servo_host_is_up(servo_hostname):
    """Given a servo host name, return if it's up or not.

    @param servo_hostname: hostname of the servo host.

    @return True if it's up, False otherwise
    """
    # Technically, this duplicates the SSH ping done early in the servo
    # proxy initialization code.  However, this ping ends in a couple
    # seconds when if fails, rather than the 60 seconds it takes to decide
    # that an SSH ping has timed out.  Specifically, that timeout happens
    # when our servo DNS name resolves, but there is no host at that IP.
    logging.info('Pinging servo host at %s', servo_hostname)
    ping_config = ping_runner.PingConfig(
            servo_hostname, count=3,
            ignore_result=True, ignore_status=True)
    return ping_runner.PingRunner().ping(ping_config).received > 0


def _map_afe_board_to_servo_board(afe_board):
    """Map a board we get from the AFE to a servo appropriate value.

    Many boards are identical to other boards for servo's purposes.
    This function makes that mapping.

    @param afe_board string board name received from AFE.
    @return board we expect servo to have.

    """
    KNOWN_SUFFIXES = ['-freon', '_freon', '_moblab', '-cheets']
    BOARD_MAP = {'gizmo': 'panther'}
    mapped_board = afe_board
    if afe_board in BOARD_MAP:
        mapped_board = BOARD_MAP[afe_board]
    else:
        for suffix in KNOWN_SUFFIXES:
            if afe_board.endswith(suffix):
                mapped_board = afe_board[0:-len(suffix)]
                break
    if mapped_board != afe_board:
        logging.info('Mapping AFE board=%s to %s', afe_board, mapped_board)
    return mapped_board


def get_servo_args_for_host(dut_host):
    """Return servo data associated with a given DUT.

    @param dut_host   Instance of `Host` on which to find the servo
                      attributes.
    @return `servo_args` dict with host and an optional port.
    """
    info = dut_host.host_info_store.get()
    servo_args = {k: v for k, v in info.attributes.iteritems()
                  if k in servo_constants.SERVO_ATTR_KEYS}

    if servo_constants.SERVO_PORT_ATTR in servo_args:
        try:
            servo_args[servo_constants.SERVO_PORT_ATTR] = int(
                servo_args[servo_constants.SERVO_PORT_ATTR])
        except ValueError:
            logging.error('servo port is not an int: %s',
                          servo_args[servo_constants.SERVO_PORT_ATTR])
            # Reset servo_args because we don't want to use an invalid port.
            servo_args.pop(servo_constants.SERVO_HOST_ATTR, None)

    if info.board:
        servo_board = _map_afe_board_to_servo_board(info.board)
        servo_args[servo_constants.SERVO_BOARD_ATTR] = servo_board
    if info.model:
        servo_args[servo_constants.SERVO_MODEL_ATTR] = info.model
    return servo_args if servo_constants.SERVO_HOST_ATTR in servo_args else None


def _tweak_args_for_ssp_moblab(servo_args):
    if (servo_args[servo_constants.SERVO_HOST_ATTR]
            in ['localhost', '127.0.0.1']):
        servo_args[servo_constants.SERVO_HOST_ATTR] = _CONFIG.get_config_value(
                'SSP', 'host_container_ip', type=str, default=None)


def create_servo_host(dut, servo_args, try_lab_servo=False,
                      try_servo_repair=False, dut_host_info=None):
    """Create a ServoHost object for a given DUT, if appropriate.

    This function attempts to create and verify or repair a `ServoHost`
    object for a servo connected to the given `dut`, subject to various
    constraints imposed by the parameters:
      * When the `servo_args` parameter is not `None`, a servo
        host must be created, and must be checked with `repair()`.
      * Otherwise, if a servo exists in the lab and `try_lab_servo` is
        true:
          * If `try_servo_repair` is true, then create a servo host and
            check it with `repair()`.
          * Otherwise, if the servo responds to `ping` then create a
            servo host and check it with `verify()`.

    In cases where `servo_args` was not `None`, repair failure
    exceptions are passed back to the caller; otherwise, exceptions
    are logged and then discarded.  Note that this only happens in cases
    where we're called from a test (not special task) control file that
    has an explicit dependency on servo.  In that case, we require that
    repair not write to `status.log`, so as to avoid polluting test
    results.

    TODO(jrbarnette):  The special handling for servo in test control
    files is a thorn in my flesh; I dearly hope to see it cut out before
    my retirement.

    Parameters for a servo host consist of a host name, port number, and
    DUT board, and are determined from one of these sources, in order of
    priority:
      * Servo attributes from the `dut` parameter take precedence over
        all other sources of information.
      * If a DNS entry for the servo based on the DUT hostname exists in
        the CrOS lab network, that hostname is used with the default
        port and the DUT's board.
      * If no other options are found, the parameters will be taken
        from the `servo_args` dict passed in from the caller.

    @param dut            An instance of `Host` from which to take
                          servo parameters (if available).
    @param servo_args     A dictionary with servo parameters to use if
                          they can't be found from `dut`.  If this
                          argument is supplied, unrepaired exceptions
                          from `verify()` will be passed back to the
                          caller.
    @param try_lab_servo  If not true, servo host creation will be
                          skipped unless otherwise required by the
                          caller.
    @param try_servo_repair  If true, check a servo host with
                          `repair()` instead of `verify()`.

    @returns: A ServoHost object or None. See comments above.

    """
    servo_dependency = servo_args is not None
    if dut is not None and (try_lab_servo or servo_dependency):
        servo_args_override = get_servo_args_for_host(dut)
        if servo_args_override is not None:
            if utils.in_moblab_ssp():
                _tweak_args_for_ssp_moblab(servo_args_override)
            logging.debug(
                    'Overriding provided servo_args (%s) with arguments'
                    ' determined from the host (%s)',
                    servo_args,
                    servo_args_override,
            )
            servo_args = servo_args_override

    if servo_args is None:
        logging.debug('No servo_args provided, and failed to find overrides.')
        if try_lab_servo or servo_dependency:
            return None, servo_constants.SERVO_STATE_NOT_CONNECTED
        else:
            # For regular test case which not required the servo
            return None, None

    servo_hostname = servo_args.get(servo_constants.SERVO_HOST_ATTR)
    servo_port = servo_args.get(servo_constants.SERVO_PORT_ATTR)
    if not _is_servo_host_information_exist(servo_hostname, servo_port):
        logging.debug(
            'Servo connection info missed hostname: %s , port: %s',
            servo_hostname, servo_port)
        return None, servo_constants.SERVO_STATE_NOT_CONNECTED
    if not is_servo_host_information_valid(servo_hostname, servo_port):
        logging.debug(
            'Servo connection info is incorrect hostname: %s , port: %s',
            servo_hostname, servo_port)
        return None, servo_constants.SERVO_STATE_WRONG_CONFIG
    if (not servo_dependency and not try_servo_repair and
            not servo_host_is_up(servo_hostname)):
        logging.debug('ServoHost is not up.')
        return None, servo_constants.SERVO_STATE_BROKEN

    newhost = ServoHost(**servo_args)

    # Reset servo if the servo is locked, as we check if the servohost is up,
    # if the servohost is labstation and if the servohost is in lab inside the
    # locking logic. Also check try_servo_repair to make sure we only do this
    # in AdminRepair tasks.
    if newhost._is_locked and try_servo_repair:
        newhost.reset_servo()

    try:
        newhost.restart_servod(quick_startup=True)
    except error.AutoservSSHTimeout:
        logging.warning("Restart servod failed due ssh connection "
                        "to servohost timed out. This error is forgiven"
                        " here, we will retry in servo repair process.")
    except error.AutoservRunError as e:
        logging.warning("Restart servod failed due to:\n%s\n"
                        "This error is forgiven here, we will retry"
                        " in servo repair process.", str(e))

    # TODO(gregorynisbet): Clean all of this up.
    logging.debug('create_servo_host: attempt to set info store on '
                  'servo host')
    try:
        if dut_host_info is None:
            logging.debug('create_servo_host: dut_host_info is '
                          'None, skipping')
        else:
            newhost.set_dut_host_info(dut_host_info)
            logging.debug('create_servo_host: successfully set info '
                          'store')
    except Exception:
        logging.error("create_servo_host: (%s)", traceback.format_exc())

    # Note that the logic of repair() includes everything done
    # by verify().  It's sufficient to call one or the other;
    # we don't need both.
    if servo_dependency:
        newhost.repair(silent=True)
        return newhost, newhost.get_servo_state()

    if try_servo_repair:
        try:
            newhost.repair()
        except Exception:
            logging.exception('servo repair failed for %s', newhost.hostname)
    else:
        try:
            newhost.verify()
        except Exception:
            logging.exception('servo verify failed for %s', newhost.hostname)
    return newhost, newhost.get_servo_state()


def _is_servo_host_information_exist(hostname, port):
    if hostname is None or len(hostname.strip()) == 0:
        return False
    if port is None:
        return False
    if not type(port) is int:
        try:
            int(port)
        except ValueError:
            return False

    return True


def is_servo_host_information_valid(hostname, port):
    """Check if provided servo attributes are valid.

    @param hostname Hostname of the servohost.
    @param port     servo port number.

    @returns: A bool value to indicate if provided servo attribute valid.
    """
    if not _is_servo_host_information_exist(hostname, port):
        return False
    # checking range and correct of the port
    port_int = int(port)
    if port_int < 1 or port_int > 65000:
        return False
    # we expecting host contain only latters, digits and '-' or '_'
    if not re.match('[a-zA-Z0-9-_\.]*$', hostname) or len(hostname) < 5:
        return False
    return True