test/fts4merge.test

# 2012 March 06
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#*************************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing the incremental merge function.
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/fts3_common.tcl

# If SQLITE_ENABLE_FTS3 is defined, omit this file.
ifcapable !fts3 {
  finish_test
  return
}

proc fts3_integrity_check {tbl} {
  db eval "INSERT INTO $tbl ($tbl) VALUES('integrity-check')"
  return "ok"
}

foreach mod {fts3 fts4} {
  set ::testprefix fts4merge-$mod
  reset_db

  #-------------------------------------------------------------------------
  # Test cases 1.*
  #
  do_test 1.0 { fts3_build_db_1 -module $mod 1004 } {}
  do_test 1.1 { fts3_integrity_check t1 } {ok}
  do_execsql_test 1.1 { 
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level 
  } {
    0 {0 1 2 3 4 5 6 7 8 9 10 11} 
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12 13}
    2 {0 1 2}
  }
  
  for {set i 0} {$i<20} {incr i} {
    do_execsql_test 1.2.$i.1 { INSERT INTO t1(t1) VALUES('merge=1') }
    do_test 1.2.$i.2 { fts3_integrity_check t1 } ok
    do_execsql_test 1.2.$i.3 { 
      SELECT docid FROM t1 WHERE t1 MATCH 'zero one two three'
    } {123 132 213 231 312 321}
  }
  
  do_execsql_test 1.3 { 
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level 
  } {
    0 {0 1 2 3} 
    1 {0 1 2 3 4 5 6} 
    2 {0 1 2 3}
  }
  
  for {set i 0} {$i<100} {incr i} {
    do_execsql_test 1.4.$i { INSERT INTO t1(t1) VALUES('merge=1,4') }
    do_test 1.4.$i.2 { fts3_integrity_check t1 } ok
    do_execsql_test 1.4.$i.3 { 
      SELECT docid FROM t1 WHERE t1 MATCH 'zero one two three'
    } {123 132 213 231 312 321}
  }
  
  do_execsql_test 1.5 { 
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level 
  } {
    2 {0 1}
    3 0
  }
  
  #-------------------------------------------------------------------------
  # Test cases 2.* test that errors in the xxx part of the 'merge=xxx' are
  # handled correctly.
  #
  do_execsql_test 2.0 "CREATE VIRTUAL TABLE t2 USING $mod"
  
  foreach {tn arg} {
    1   {merge=abc}
    2   {merge=%%%}
    3   {merge=,}
    4   {merge=5,}
    5   {merge=6,%}
    6   {merge=6,six}
    7   {merge=6,1}
    8   {merge=6,0}
  } {
    do_catchsql_test 2.$tn { 
      INSERT INTO t2(t2) VALUES($arg);
    } {1 {SQL logic error or missing database}}
  }
  
  #-------------------------------------------------------------------------
  # Test cases 3.*
  #
  do_test 3.0 { 
    reset_db
    execsql { PRAGMA page_size = 512 }
    fts3_build_db_2 -module $mod 30040 
  } {}
  do_test 3.1 { fts3_integrity_check t2 } {ok}
  
  do_execsql_test 3.2 { 
    SELECT level, group_concat(idx, ' ') FROM t2_segdir GROUP BY level 
  } {
    0 {0 1 2 3 4 5 6} 
    1 {0 1 2 3 4} 
    2 {0 1 2 3 4} 
    3 {0 1 2 3 4 5 6}
  }
  
  do_execsql_test 3.3 { 
    INSERT INTO t2(t2) VALUES('merge=1000000,2');
    SELECT level, group_concat(idx, ' ') FROM t2_segdir GROUP BY level 
  } {
    0 0 
    2 0
    3 0 
    4 0
    6 0
  }
  
  #-------------------------------------------------------------------------
  # Test cases 4.*
  #
  reset_db
  do_execsql_test 4.1 "
    PRAGMA page_size = 512;
    CREATE VIRTUAL TABLE t4 USING $mod;
    PRAGMA main.page_size;
  " {512}
  
  do_test 4.2 {
    foreach x {a c b d e f g h i j k l m n o p} {
      execsql "INSERT INTO t4 VALUES('[string repeat $x 600]')"
    }
    execsql {SELECT level, group_concat(idx, ' ') FROM t4_segdir GROUP BY level}
  } {0 {0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15}}
  
  foreach {tn expect} {
    1  "0 {0 1 2 3 4 5 6 7 8 9 10 11 12 13} 1 0"
    2  "0 {0 1 2 3 4 5 6 7 8 9 10 11 12}    1 0"
    3  "0 {0 1 2 3 4 5 6 7 8 9 10 11}       1 0"
    4  "0 {0 1 2 3 4 5 6 7 8 9 10}          1 0"
    5  "0 {0 1 2 3 4 5 6 7 8 9}             1 0"
    6  "0 {0 1 2 3 4 5 6 7 8}               1 0"
    7  "0 {0 1 2 3 4 5 6 7}                 1 0"
    8  "0 {0 1 2 3 4 5 6}                   1 0"
    9  "0 {0 1 2 3 4 5}                     1 0"
  } {
    do_execsql_test 4.3.$tn {
      INSERT INTO t4(t4) VALUES('merge=1,16');
      SELECT level, group_concat(idx, ' ') FROM t4_segdir GROUP BY level;
    } $expect
  }
  
  do_execsql_test 4.4.1 {
    SELECT quote(value) FROM t4_stat WHERE rowid=1
  } {X'0006'}
  
  do_execsql_test 4.4.2 {
    DELETE FROM t4_stat WHERE rowid=1;
    INSERT INTO t4(t4) VALUES('merge=1,12');
    SELECT level, group_concat(idx, ' ') FROM t4_segdir GROUP BY level;
  } "0 {0 1 2 3 4 5}                     1 0"
  
  
  #-------------------------------------------------------------------------
  # Test cases 5.*
  #
  # Test that if a crisis-merge occurs that disrupts an ongoing incremental
  # merge, the next call to "merge=A,B" identifies this and starts a new
  # incremental merge. There are two scenarios:
  #
  #   * There are less segments on the input level that the disrupted
  #     incremental merge operated on, or
  #   
  #   * Sufficient segments exist on the input level but the segments 
  #     contain keys smaller than the largest key in the potential output 
  #     segment.
  # 
  do_test 5.1 {
    reset_db
    fts3_build_db_1 -module $mod 1000
  } {}
  
  do_execsql_test 5.2 {
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
  } {
    0 {0 1 2 3 4 5 6 7} 
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12 13} 
    2 {0 1 2}
  }
  
  do_execsql_test 5.3 {
    INSERT INTO t1(t1) VALUES('merge=1,5');
    INSERT INTO t1(t1) VALUES('merge=1,5');
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
  } {
    0 {0 1 2}
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12 13 14} 
    2 {0 1 2 3}
  }
  
  do_execsql_test 5.4 {SELECT quote(value) from t1_stat WHERE rowid=1} {X'0105'}
  do_test 5.5 {
    foreach docid [execsql {SELECT docid FROM t1}] {
      execsql {INSERT INTO t1 SELECT * FROM t1 WHERE docid=$docid}
    }
  } {}
  
  do_execsql_test 5.6 {SELECT quote(value) from t1_stat WHERE rowid=1} {X'0105'}
  
  do_execsql_test 5.7 {
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
    SELECT quote(value) from t1_stat WHERE rowid=1;
  } {
    0 {0 1 2 3 4 5 6 7 8 9 10} 
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12} 
    2 {0 1 2 3 4 5 6 7}
    X'0105'
  }
  
  do_execsql_test 5.8 {
    INSERT INTO t1(t1) VALUES('merge=1,6');
    INSERT INTO t1(t1) VALUES('merge=1,6');
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
    SELECT quote(value) from t1_stat WHERE rowid=1;
  } {
    0 {0 1 2 3 4} 
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12 13} 
    2 {0 1 2 3 4 5 6 7 8} X'0106'
  }
  
  do_test 5.8.1 { fts3_integrity_check t1 } ok
  
  do_test 5.9 {
    set L [expr 16*16*7 + 16*3 + 12]
    foreach docid [execsql {
        SELECT docid FROM t1 UNION ALL SELECT docid FROM t1 LIMIT $L
    }] {
      execsql {INSERT INTO t1 SELECT * FROM t1 WHERE docid=$docid}
    }
  } {}
  
  do_execsql_test 5.10 {
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
    SELECT quote(value) from t1_stat WHERE rowid=1;
  } {
    0 0 1 {0 1} 2 0 3 0 X'0106'
  }
  
  do_execsql_test 5.11 {
    INSERT INTO t1(t1) VALUES('merge=1,6');
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level;
    SELECT quote(value) from t1_stat WHERE rowid=1;
  } {
    0 0 1 {0 1} 2 0 3 0 X''
  }
  
  #-------------------------------------------------------------------------
  # Test cases 6.*
  #
  # At one point the following test caused an assert() to fail (because the
  # second 'merge=1,2' operation below actually "merges" a single input
  # segment, which was unexpected).
  #
  do_test 6.1 {
    reset_db
    set a [string repeat a 900]
    set b [string repeat b 900]
    set c [string repeat c 900]
    set d [string repeat d 900]

    execsql "CREATE VIRTUAL TABLE t1 USING $mod"
    execsql {
      BEGIN;
        INSERT INTO t1 VALUES($a);
        INSERT INTO t1 VALUES($b);
      COMMIT;
      BEGIN;
        INSERT INTO t1 VALUES($c);
        INSERT INTO t1 VALUES($d);
      COMMIT;
    }
  
    execsql {
      INSERT INTO t1(t1) VALUES('merge=1,2');
      INSERT INTO t1(t1) VALUES('merge=1,2');
    }
  } {}
  
  #-------------------------------------------------------------------------
  # Test cases 7.*
  #
  # Test that the value returned by sqlite3_total_changes() increases by
  # 1 following a no-op "merge=A,B", or by more than 1 if actual work is
  # performed.
  #
  do_test 7.0 {
    reset_db
    fts3_build_db_1 -module $mod 1000
  } {}
  
  do_execsql_test 7.1 {
    SELECT level, group_concat(idx, ' ') FROM t1_segdir GROUP BY level
  } {
    0 {0 1 2 3 4 5 6 7} 
    1 {0 1 2 3 4 5 6 7 8 9 10 11 12 13} 
    2 {0 1 2}
  }
  do_test 7.2 {
    set x [db total_changes]
    execsql { INSERT INTO t1(t1) VALUES('merge=2,10') }
    expr { ([db total_changes] - $x)>1 }
  } {1}
  do_test 7.3 {
    set x [db total_changes]
    execsql { INSERT INTO t1(t1) VALUES('merge=200,10') }
    expr { ([db total_changes] - $x)>1 }
  } {1}
  do_test 7.4 {
    set x [db total_changes]
    execsql { INSERT INTO t1(t1) VALUES('merge=200,10') }
    expr { ([db total_changes] - $x)>1 }
  } {0}
  do_test 7.5 {
    set x [db total_changes]
    execsql { INSERT INTO t1(t1) VALUES('merge=200,10') }
    expr { ([db total_changes] - $x)>1 }
  } {0}

}

finish_test