Makefile.msc

#
# nmake Makefile for SQLite
#
###############################################################################
############################## START OF OPTIONS ###############################
###############################################################################

# The toplevel directory of the source tree.  This is the directory
# that contains this "Makefile.msc".
#
TOP = .

# <<mark>>
# Set this non-0 to create and use the SQLite amalgamation file.
#
!IFNDEF USE_AMALGAMATION
USE_AMALGAMATION = 1
!ENDIF
# <</mark>>

# Set this non-0 to enable full warnings (-W4, etc) when compiling.
#
!IFNDEF USE_FULLWARN
USE_FULLWARN = 1
!ENDIF

# Set this non-0 to enable treating warnings as errors (-WX, etc) when
# compiling.
#
!IFNDEF USE_FATAL_WARN
USE_FATAL_WARN = 0
!ENDIF

# Set this non-0 to enable full runtime error checks (-RTC1, etc).  This
# has no effect if (any) optimizations are enabled.
#
!IFNDEF USE_RUNTIME_CHECKS
USE_RUNTIME_CHECKS = 0
!ENDIF

# Set this non-0 to create a SQLite amalgamation file that excludes the
# various built-in extensions.
#
!IFNDEF MINIMAL_AMALGAMATION
MINIMAL_AMALGAMATION = 0
!ENDIF

# Set this non-0 to use "stdcall" calling convention for the core library
# and shell executable.
#
!IFNDEF USE_STDCALL
USE_STDCALL = 0
!ENDIF

# Set this non-0 to have the shell executable link against the core dynamic
# link library.
#
!IFNDEF DYNAMIC_SHELL
DYNAMIC_SHELL = 0
!ENDIF

# Set this non-0 to enable extra code that attempts to detect misuse of the
# SQLite API.
#
!IFNDEF API_ARMOR
API_ARMOR = 0
!ENDIF

# If necessary, create a list of harmless compiler warnings to disable when
# compiling the various tools.  For the SQLite source code itself, warnings,
# if any, will be disabled from within it.
#
!IFNDEF NO_WARN
!IF $(USE_FULLWARN)!=0
NO_WARN = -wd4054 -wd4055 -wd4100 -wd4127 -wd4130 -wd4152 -wd4189 -wd4206
NO_WARN = $(NO_WARN) -wd4210 -wd4232 -wd4244 -wd4305 -wd4306 -wd4702 -wd4706
!ENDIF
!ENDIF

# Set this non-0 to use the library paths and other options necessary for
# Windows Phone 8.1.
#
!IFNDEF USE_WP81_OPTS
USE_WP81_OPTS = 0
!ENDIF

# Set this non-0 to split the SQLite amalgamation file into chunks to
# be used for debugging with Visual Studio.
#
!IFNDEF SPLIT_AMALGAMATION
SPLIT_AMALGAMATION = 0
!ENDIF

# <<mark>>
# Set this non-0 to have this makefile assume the Tcl shell executable
# (tclsh*.exe) is available in the PATH.  By default, this is disabled
# for compatibility with older build environments.  This setting only
# applies if TCLSH_CMD is not set manually.
#
!IFNDEF USE_TCLSH_IN_PATH
USE_TCLSH_IN_PATH = 0
!ENDIF

# Set this non-0 to use zlib, possibly compiling it from source code.
#
!IFNDEF USE_ZLIB
USE_ZLIB = 0
!ENDIF

# Set this non-0 to build zlib from source code.  This is enabled by
# default and in that case it will be assumed that the ZLIBDIR macro
# points to the top-level source code directory for zlib.
#
!IFNDEF BUILD_ZLIB
BUILD_ZLIB = 1
!ENDIF

# Set this non-0 to use the International Components for Unicode (ICU).
#
!IFNDEF USE_ICU
USE_ICU = 0
!ENDIF
# <</mark>>

# Set this non-0 to dynamically link to the MSVC runtime library.
#
!IFNDEF USE_CRT_DLL
USE_CRT_DLL = 0
!ENDIF

# Set this non-0 to link to the RPCRT4 library.
#
!IFNDEF USE_RPCRT4_LIB
USE_RPCRT4_LIB = 0
!ENDIF

# Set this non-0 to generate assembly code listings for the source code
# files.
#
!IFNDEF USE_LISTINGS
USE_LISTINGS = 0
!ENDIF

# Set this non-0 to attempt setting the native compiler automatically
# for cross-compiling the command line tools needed during the compilation
# process.
#
!IFNDEF XCOMPILE
XCOMPILE = 0
!ENDIF

# Set this non-0 to use the native libraries paths for cross-compiling
# the command line tools needed during the compilation process.
#
!IFNDEF USE_NATIVE_LIBPATHS
USE_NATIVE_LIBPATHS = 0
!ENDIF

# Set this 0 to skip the compiling and embedding of version resources.
#
!IFNDEF USE_RC
USE_RC = 1
!ENDIF

# Set this non-0 to compile binaries suitable for the WinRT environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
#
!IFNDEF FOR_WINRT
FOR_WINRT = 0
!ENDIF

# Set this non-0 to compile binaries suitable for the UWP environment.
# This setting does not apply to any binaries that require Tcl to operate
# properly (i.e. the text fixture, etc).
#
!IFNDEF FOR_UWP
FOR_UWP = 0
!ENDIF

# Set this non-0 to compile binaries suitable for the Windows 10 platform.
#
!IFNDEF FOR_WIN10
FOR_WIN10 = 0
!ENDIF

# <<mark>>
# Set this non-0 to skip attempting to look for and/or link with the Tcl
# runtime library.
#
!IFNDEF NO_TCL
NO_TCL = 0
!ENDIF
# <</mark>>

# Set this to non-0 to create and use PDBs.
#
!IFNDEF SYMBOLS
SYMBOLS = 1
!ENDIF

# Set this to non-0 to use the SQLite debugging heap subsystem.
#
!IFNDEF MEMDEBUG
MEMDEBUG = 0
!ENDIF

# Set this to non-0 to use the Win32 native heap subsystem.
#
!IFNDEF WIN32HEAP
WIN32HEAP = 0
!ENDIF

# Set this to non-0 to enable OSTRACE() macros, which can be useful when
# debugging.
#
!IFNDEF OSTRACE
OSTRACE = 0
!ENDIF

# Set this to one of the following values to enable various debugging
# features.  Each level includes the debugging options from the previous
# levels.  Currently, the recognized values for DEBUG are:
#
# 0 == NDEBUG: Disables assert() and other runtime diagnostics.
# 1 == SQLITE_ENABLE_API_ARMOR: extra attempts to detect misuse of the API.
# 2 == Disables NDEBUG and all optimizations and then enables PDBs.
# 3 == SQLITE_DEBUG: Enables various diagnostics messages and code.
# 4 == SQLITE_WIN32_MALLOC_VALIDATE: Validate the Win32 native heap per call.
# 5 == SQLITE_DEBUG_OS_TRACE: Enables output from the OSTRACE() macros.
# 6 == SQLITE_ENABLE_IOTRACE: Enables output from the IOTRACE() macros.
#
!IFNDEF DEBUG
DEBUG = 0
!ENDIF

# <<mark>>
# By default, use --linemacros=1 argument to the mksqlite3c.tcl tool, which
# is used to build the amalgamation. This can be turned off to ease debug
# of the amalgamation away from the source tree.
#
!IFNDEF NO_LINEMACROS
NO_LINEMACROS = 0
!ENDIF
# <</mark>>

# Enable use of available compiler optimizations?  Normally, this should be
# non-zero.  Setting this to zero, thus disabling all compiler optimizations,
# can be useful for testing.
#
!IFNDEF OPTIMIZATIONS
OPTIMIZATIONS = 2
!ENDIF

# Set this to non-0 to enable support for the session extension.
#
!IFNDEF SESSION
SESSION = 0
!ENDIF

# Set this to non-0 to enable support for the rbu extension.
#
!IFNDEF RBU
RBU = 0
!ENDIF

# Set the source code file to be used by executables and libraries when
# they need the amalgamation.
#
!IFNDEF SQLITE3C
!IF $(SPLIT_AMALGAMATION)!=0
SQLITE3C = sqlite3-all.c
!ELSE
SQLITE3C = sqlite3.c
!ENDIF
!ENDIF

# Set the include code file to be used by executables and libraries when
# they need SQLite.
#
!IFNDEF SQLITE3H
SQLITE3H = sqlite3.h
!ENDIF

# This is the name to use for the SQLite dynamic link library (DLL).
#
!IFNDEF SQLITE3DLL
!IF $(FOR_WIN10)!=0
SQLITE3DLL = winsqlite3.dll
!ELSE
SQLITE3DLL = sqlite3.dll
!ENDIF
!ENDIF

# This is the name to use for the SQLite import library (LIB).
#
!IFNDEF SQLITE3LIB
!IF $(FOR_WIN10)!=0
SQLITE3LIB = winsqlite3.lib
!ELSE
SQLITE3LIB = sqlite3.lib
!ENDIF
!ENDIF

# This is the name to use for the SQLite shell executable (EXE).
#
!IFNDEF SQLITE3EXE
!IF $(FOR_WIN10)!=0
SQLITE3EXE = winsqlite3shell.exe
!ELSE
SQLITE3EXE = sqlite3.exe
!ENDIF
!ENDIF

# This is the argument used to set the program database (PDB) file for the
# SQLite shell executable (EXE).
#
!IFNDEF SQLITE3EXEPDB
!IF $(FOR_WIN10)!=0
SQLITE3EXEPDB =
!ELSE
SQLITE3EXEPDB = /pdb:sqlite3sh.pdb
!ENDIF
!ENDIF

# <<mark>>
# These are the names of the customized Tcl header files used by various parts
# of this makefile when the stdcall calling convention is in use.  It is not
# used for any other purpose.
#
!IFNDEF SQLITETCLH
SQLITETCLH = sqlite_tcl.h
!ENDIF

!IFNDEF SQLITETCLDECLSH
SQLITETCLDECLSH = sqlite_tclDecls.h
!ENDIF

# This is the name to use for the dynamic link library (DLL) containing the
# Tcl bindings for SQLite.
#
!IFNDEF SQLITE3TCLDLL
SQLITE3TCLDLL = tclsqlite3.dll
!ENDIF

# These are the additional targets that the targets that integrate with the
# Tcl library should depend on when compiling, etc.
#
!IFNDEF SQLITE_TCL_DEP
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
SQLITE_TCL_DEP = $(SQLITETCLDECLSH) $(SQLITETCLH)
!ELSE
SQLITE_TCL_DEP =
!ENDIF
!ENDIF
# <</mark>>

# These are the "standard" SQLite compilation options used when compiling for
# the Windows platform.
#
!IFNDEF OPT_FEATURE_FLAGS
!IF $(MINIMAL_AMALGAMATION)==0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_BYTECODE_VTAB=1
!ENDIF
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1
!ENDIF

# Should the session extension be enabled?  If so, add compilation options
# to enable it.
#
!IF $(SESSION)!=0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_SESSION=1
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_PREUPDATE_HOOK=1
!ENDIF

# Always enable math functions on Windows
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_MATH_FUNCTIONS

# Should the rbu extension be enabled?  If so, add compilation options
# to enable it.
#
!IF $(RBU)!=0
OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RBU=1
!ENDIF

# These are the "extended" SQLite compilation options used when compiling for
# the Windows 10 platform.
#
!IFNDEF EXT_FEATURE_FLAGS
!IF $(FOR_WIN10)!=0
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS4=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_SYSTEM_MALLOC=1
EXT_FEATURE_FLAGS = $(EXT_FEATURE_FLAGS) -DSQLITE_OMIT_LOCALTIME=1
!ELSE
EXT_FEATURE_FLAGS =
!ENDIF
!ENDIF

###############################################################################
############################### END OF OPTIONS ################################
###############################################################################

# When compiling for the Windows 10 platform, the PLATFORM macro must be set
# to an appropriate value (e.g. x86, x64, arm, arm64, etc).
#
!IF $(FOR_WIN10)!=0
!IFNDEF PLATFORM
!ERROR Using the FOR_WIN10 option requires a value for PLATFORM.
!ENDIF
!ENDIF

# This assumes that MSVC is always installed in 32-bit Program Files directory
# and sets the variable for use in locating other 32-bit installs accordingly.
#
PROGRAMFILES_X86 = $(VCINSTALLDIR)\..\..
PROGRAMFILES_X86 = $(PROGRAMFILES_X86:\\=\)

# Check for the predefined command macro CC.  This should point to the compiler
# binary for the target platform.  If it is not defined, simply define it to
# the legacy default value 'cl.exe'.
#
!IFNDEF CC
CC = cl.exe
!ENDIF

# Check for the predefined command macro CSC.  This should point to a working
# C Sharp compiler binary.  If it is not defined, simply define it to the
# legacy default value 'csc.exe'.
#
!IFNDEF CSC
CSC = csc.exe
!ENDIF

# Check for the command macro LD.  This should point to the linker binary for
# the target platform.  If it is not defined, simply define it to the legacy
# default value 'link.exe'.
#
!IFNDEF LD
LD = link.exe
!ENDIF

# Check for the predefined command macro RC.  This should point to the resource
# compiler binary for the target platform.  If it is not defined, simply define
# it to the legacy default value 'rc.exe'.
#
!IFNDEF RC
RC = rc.exe
!ENDIF

# Check for the MSVC runtime library path macro.  Otherwise, this value will
# default to the 'lib' directory underneath the MSVC installation directory.
#
!IFNDEF CRTLIBPATH
CRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

CRTLIBPATH = $(CRTLIBPATH:\\=\)

# Check for the command macro NCC.  This should point to the compiler binary
# for the platform the compilation process is taking place on.  If it is not
# defined, simply define it to have the same value as the CC macro.  When
# cross-compiling, it is suggested that this macro be modified via the command
# line (since nmake itself does not provide a built-in method to guess it).
# For example, to use the x86 compiler when cross-compiling for x64, a command
# line similar to the following could be used (all on one line):
#
#     nmake /f Makefile.msc sqlite3.dll
#           XCOMPILE=1 USE_NATIVE_LIBPATHS=1
#
# Alternatively, the full path and file name to the compiler binary for the
# platform the compilation process is taking place may be specified (all on
# one line):
#
#     nmake /f Makefile.msc sqlite3.dll
#           "NCC=""%VCINSTALLDIR%\bin\cl.exe"""
#           USE_NATIVE_LIBPATHS=1
#
!IFDEF NCC
NCC = $(NCC:\\=\)
!ELSEIF $(XCOMPILE)!=0
NCC = "$(VCINSTALLDIR)\bin\$(CC)"
NCC = $(NCC:\\=\)
!ELSE
NCC = $(CC)
!ENDIF

# Check for the MSVC native runtime library path macro.  Otherwise,
# this value will default to the 'lib' directory underneath the MSVC
# installation directory.
#
!IFNDEF NCRTLIBPATH
NCRTLIBPATH = $(VCINSTALLDIR)\lib
!ENDIF

NCRTLIBPATH = $(NCRTLIBPATH:\\=\)

# Check for the Platform SDK library path macro.  Otherwise, this
# value will default to the 'lib' directory underneath the Windows
# SDK installation directory (the environment variable used appears
# to be available when using Visual C++ 2008 or later via the
# command line).
#
!IFNDEF NSDKLIBPATH
NSDKLIBPATH = $(WINDOWSSDKDIR)\lib
!ENDIF

NSDKLIBPATH = $(NSDKLIBPATH:\\=\)

# Check for the UCRT library path macro.  Otherwise, this value will
# default to the version-specific, platform-specific 'lib' directory
# underneath the Windows SDK installation directory.
#
!IFNDEF UCRTLIBPATH
UCRTLIBPATH = $(WINDOWSSDKDIR)\lib\$(WINDOWSSDKLIBVERSION)\ucrt\$(PLATFORM)
!ENDIF

UCRTLIBPATH = $(UCRTLIBPATH:\\=\)

# C compiler and options for use in building executables that
# will run on the platform that is doing the build.
#
!IF $(USE_FULLWARN)!=0
BCC = $(NCC) -nologo -W4 -Fd$*.pdb $(CCOPTS) $(BCCOPTS)
!ELSE
BCC = $(NCC) -nologo -W3 -Fd$*.pdb $(CCOPTS) $(BCCOPTS)
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
BCC = $(BCC) -FAcs
!ENDIF

# Check if the native library paths should be used when compiling
# the command line tools used during the compilation process.  If
# so, set the necessary macro now.
#
!IF $(USE_NATIVE_LIBPATHS)!=0
NLTLIBPATHS = "/LIBPATH:$(NCRTLIBPATH)" "/LIBPATH:$(NSDKLIBPATH)"

!IFDEF NUCRTLIBPATH
NUCRTLIBPATH = $(NUCRTLIBPATH:\\=\)
NLTLIBPATHS = $(NLTLIBPATHS) "/LIBPATH:$(NUCRTLIBPATH)"
!ENDIF
!ENDIF

# C compiler and options for use in building executables that
# will run on the target platform.  (BCC and TCC are usually the
# same unless your are cross-compiling.)
#
!IF $(USE_FULLWARN)!=0
TCC = $(CC) -nologo -W4 -DINCLUDE_MSVC_H=1 $(CCOPTS) $(TCCOPTS)
!ELSE
TCC = $(CC) -nologo -W3 $(CCOPTS) $(TCCOPTS)
!ENDIF

# Check if warnings should be treated as errors when compiling.
#
!IF $(USE_FATAL_WARN)!=0
TCC = $(TCC) -WX
!ENDIF

TCC = $(TCC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src -fp:precise
RCC = $(RC) -DSQLITE_OS_WIN=1 -I. -I$(TOP) -I$(TOP)\src $(RCOPTS) $(RCCOPTS)

# Check if we want to use the "stdcall" calling convention when compiling.
# This is not supported by the compilers for non-x86 platforms.  It should
# also be noted here that building any target with these "stdcall" options
# will most likely fail if the Tcl library is also required.  This is due
# to how the Tcl library functions are declared and exported (i.e. without
# an explicit calling convention, which results in "cdecl").
#
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
!IF "$(PLATFORM)"=="x86"
CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
# <<mark>>
TEST_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl
# <</mark>>
!ELSE
!IFNDEF PLATFORM
CORE_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
SHELL_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall
# <<mark>>
TEST_CCONV_OPTS = -Gz -guard:cf -DSQLITE_CDECL=__cdecl -DSQLITE_APICALL=__stdcall -DSQLITE_CALLBACK=__stdcall -DSQLITE_SYSAPI=__stdcall -DINCLUDE_SQLITE_TCL_H=1 -DSQLITE_TCLAPI=__cdecl
# <</mark>>
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
# <<mark>>
TEST_CCONV_OPTS =
# <</mark>>
!ENDIF
!ENDIF
!ELSE
CORE_CCONV_OPTS =
SHELL_CCONV_OPTS =
# <<mark>>
TEST_CCONV_OPTS =
# <</mark>>
!ENDIF

# These are additional compiler options used for the core library.
#
!IFNDEF CORE_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS) -DSQLITE_API=__declspec(dllexport)
!ELSE
CORE_COMPILE_OPTS = $(CORE_CCONV_OPTS)
!ENDIF
!ENDIF

# These are the additional targets that the core library should depend on
# when linking.
#
!IFNDEF CORE_LINK_DEP
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_DEP =
!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
CORE_LINK_DEP = sqlite3.def
!ELSE
CORE_LINK_DEP =
!ENDIF
!ENDIF

# These are additional linker options used for the core library.
#
!IFNDEF CORE_LINK_OPTS
!IF $(DYNAMIC_SHELL)!=0
CORE_LINK_OPTS =
!ELSEIF $(FOR_WIN10)==0 || "$(PLATFORM)"=="x86"
CORE_LINK_OPTS = /DEF:sqlite3.def
!ELSE
CORE_LINK_OPTS =
!ENDIF
!ENDIF

# These are additional compiler options used for the shell executable.
#
!IFNDEF SHELL_COMPILE_OPTS
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS) -DSQLITE_API=__declspec(dllimport)
!ELSE
SHELL_COMPILE_OPTS = $(SHELL_CCONV_OPTS)
!ENDIF
!ENDIF

# This is the source code that the shell executable should be compiled
# with.
#
!IFNDEF SHELL_CORE_SRC
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_SRC =
# <<mark>>
!ELSEIF $(USE_AMALGAMATION)==0
SHELL_CORE_SRC =
# <</mark>>
!ELSE
SHELL_CORE_SRC = $(SQLITE3C)
!ENDIF
!ENDIF

# This is the core library that the shell executable should depend on.
#
!IFNDEF SHELL_CORE_DEP
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_DEP = $(SQLITE3DLL)
# <<mark>>
!ELSEIF $(USE_AMALGAMATION)==0
SHELL_CORE_DEP = libsqlite3.lib
# <</mark>>
!ELSE
SHELL_CORE_DEP =
!ENDIF
!ENDIF

# <<mark>>
# If zlib support is enabled, add the dependencies for it.
#
!IF $(USE_ZLIB)!=0 && $(BUILD_ZLIB)!=0
SHELL_CORE_DEP = zlib $(SHELL_CORE_DEP)
TESTFIXTURE_DEP = zlib $(TESTFIXTURE_DEP)
!ENDIF
# <</mark>>

# This is the core library that the shell executable should link with.
#
!IFNDEF SHELL_CORE_LIB
!IF $(DYNAMIC_SHELL)!=0 || $(FOR_WIN10)!=0
SHELL_CORE_LIB = $(SQLITE3LIB)
# <<mark>>
!ELSEIF $(USE_AMALGAMATION)==0
SHELL_CORE_LIB = libsqlite3.lib
# <</mark>>
!ELSE
SHELL_CORE_LIB =
!ENDIF
!ENDIF

# These are additional linker options used for the shell executable.
#
!IFNDEF SHELL_LINK_OPTS
SHELL_LINK_OPTS = $(SHELL_CORE_LIB)
!ENDIF

# Check if assembly code listings should be generated for the source
# code files to be compiled.
#
!IF $(USE_LISTINGS)!=0
TCC = $(TCC) -FAcs
!ENDIF

# When compiling the library for use in the WinRT environment,
# the following compile-time options must be used as well to
# disable use of Win32 APIs that are not available and to enable
# use of Win32 APIs that are specific to Windows 8 and/or WinRT.
#
!IF $(FOR_WINRT)!=0
TCC = $(TCC) -DSQLITE_OS_WINRT=1
RCC = $(RCC) -DSQLITE_OS_WINRT=1
TCC = $(TCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
RCC = $(RCC) -DWINAPI_FAMILY=WINAPI_FAMILY_APP
!ENDIF

# C compiler options for the Windows 10 platform (needs MSVC 2015).
#
!IF $(FOR_WIN10)!=0
TCC = $(TCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
BCC = $(BCC) /d2guard4 -D_ARM_WINAPI_PARTITION_DESKTOP_SDK_AVAILABLE
!ENDIF

# Also, we need to dynamically link to the correct MSVC runtime
# when compiling for WinRT (e.g. debug or release) OR if the
# USE_CRT_DLL option is set to force dynamically linking to the
# MSVC runtime library.
#
!IF $(FOR_WINRT)!=0 || $(USE_CRT_DLL)!=0
!IF $(DEBUG)>1
TCC = $(TCC) -MDd
BCC = $(BCC) -MDd
!ELSE
TCC = $(TCC) -MD
BCC = $(BCC) -MD
!ENDIF
!ELSE
!IF $(DEBUG)>1
TCC = $(TCC) -MTd
BCC = $(BCC) -MTd
!ELSE
TCC = $(TCC) -MT
BCC = $(BCC) -MT
!ENDIF
!ENDIF

# <<mark>>
# The mksqlite3c.tcl and mksqlite3h.tcl scripts will pull in
# any extension header files by default.  For non-amalgamation
# builds, we need to make sure the compiler can find these.
#
!IF $(USE_AMALGAMATION)==0
TCC = $(TCC) -I$(TOP)\ext\fts3
RCC = $(RCC) -I$(TOP)\ext\fts3
TCC = $(TCC) -I$(TOP)\ext\rtree
RCC = $(RCC) -I$(TOP)\ext\rtree
TCC = $(TCC) -I$(TOP)\ext\session
RCC = $(RCC) -I$(TOP)\ext\session
!ENDIF

# The mksqlite3c.tcl script accepts some options on the command
# line.  When compiling with debugging enabled, some of these
# options are necessary in order to allow debugging symbols to
# work correctly with Visual Studio when using the amalgamation.
#
!IFNDEF MKSQLITE3C_TOOL
!IF $(MINIMAL_AMALGAMATION)!=0
MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c-noext.tcl
!ELSE
MKSQLITE3C_TOOL = $(TOP)\tool\mksqlite3c.tcl
!ENDIF
!ENDIF

!IFNDEF MKSQLITE3C_ARGS
!IF $(DEBUG)>1 && $(NO_LINEMACROS)==0
MKSQLITE3C_ARGS = --linemacros=1
!ELSE
MKSQLITE3C_ARGS = --linemacros=0
!ENDIF
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
MKSQLITE3C_ARGS = $(MKSQLITE3C_ARGS) --useapicall
!ENDIF
!ENDIF

# The mksqlite3h.tcl script accepts some options on the command line.
# When compiling with stdcall support, some of these options are
# necessary.
#
!IFNDEF MKSQLITE3H_ARGS
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
MKSQLITE3H_ARGS = --useapicall
!ELSE
MKSQLITE3H_ARGS =
!ENDIF
!ENDIF
# <</mark>>

# Define -DNDEBUG to compile without debugging (i.e., for production usage)
# Omitting the define will cause extra debugging code to be inserted and
# includes extra comments when "EXPLAIN stmt" is used.
#
!IF $(DEBUG)==0
TCC = $(TCC) -DNDEBUG
BCC = $(BCC) -DNDEBUG
RCC = $(RCC) -DNDEBUG
!ENDIF

!IF $(DEBUG)>0 || $(API_ARMOR)!=0 || $(FOR_WIN10)!=0
TCC = $(TCC) -DSQLITE_ENABLE_API_ARMOR=1
RCC = $(RCC) -DSQLITE_ENABLE_API_ARMOR=1
!ENDIF

!IF $(DEBUG)>2
TCC = $(TCC) -DSQLITE_DEBUG=1
RCC = $(RCC) -DSQLITE_DEBUG=1
!IF $(DYNAMIC_SHELL)==0
TCC = $(TCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
RCC = $(RCC) -DSQLITE_ENABLE_WHERETRACE -DSQLITE_ENABLE_SELECTTRACE
!ENDIF
!ENDIF

!IF $(DEBUG)>4 || $(OSTRACE)!=0
TCC = $(TCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
RCC = $(RCC) -DSQLITE_FORCE_OS_TRACE=1 -DSQLITE_DEBUG_OS_TRACE=1
!ENDIF

!IF $(DEBUG)>5
TCC = $(TCC) -DSQLITE_ENABLE_IOTRACE=1
RCC = $(RCC) -DSQLITE_ENABLE_IOTRACE=1
!ENDIF

# Prevent warnings about "insecure" MSVC runtime library functions
# being used.
#
TCC = $(TCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
BCC = $(BCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS
RCC = $(RCC) -D_CRT_SECURE_NO_DEPRECATE -D_CRT_SECURE_NO_WARNINGS

# Prevent warnings about "deprecated" POSIX functions being used.
#
TCC = $(TCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
BCC = $(BCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS
RCC = $(RCC) -D_CRT_NONSTDC_NO_DEPRECATE -D_CRT_NONSTDC_NO_WARNINGS

# Use the SQLite debugging heap subsystem?
#
!IF $(MEMDEBUG)!=0
TCC = $(TCC) -DSQLITE_MEMDEBUG=1
RCC = $(RCC) -DSQLITE_MEMDEBUG=1

# Use native Win32 heap subsystem instead of malloc/free?
#
!ELSEIF $(WIN32HEAP)!=0
TCC = $(TCC) -DSQLITE_WIN32_MALLOC=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC=1

# Validate the heap on every call into the native Win32 heap subsystem?
#
!IF $(DEBUG)>3
TCC = $(TCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
RCC = $(RCC) -DSQLITE_WIN32_MALLOC_VALIDATE=1
!ENDIF
!ENDIF

# <<mark>>
# The locations of the Tcl header and library files.  Also, the library that
# non-stubs enabled programs using Tcl must link against.  These variables
# (TCLINCDIR, TCLLIBDIR, and LIBTCL) may be overridden via the environment
# prior to running nmake in order to match the actual installed location and
# version on this machine.
#
!IFNDEF TCLVERSION
TCLVERSION = 86
!ENDIF

!IFNDEF TCLSUFFIX
TCLSUFFIX =
!ENDIF

!IFNDEF TCLDIR
TCLDIR = $(TOP)\compat\tcl
!ENDIF

!IFNDEF TCLINCDIR
TCLINCDIR = $(TCLDIR)\include
!ENDIF

!IFNDEF TCLLIBDIR
TCLLIBDIR = $(TCLDIR)\lib
!ENDIF

!IFNDEF LIBTCL
LIBTCL = tcl$(TCLVERSION)$(TCLSUFFIX).lib
!ENDIF

!IFNDEF LIBTCLSTUB
LIBTCLSTUB = tclstub$(TCLVERSION)$(TCLSUFFIX).lib
!ENDIF

!IFNDEF LIBTCLPATH
LIBTCLPATH = $(TCLDIR)\bin
!ENDIF

# The locations of the zlib header and library files.  These variables
# (ZLIBINCDIR, ZLIBLIBDIR, and ZLIBLIB) may be overridden via the environment
# prior to running nmake in order to match the actual installed (or source
# code) location on this machine.
#
!IFNDEF ZLIBDIR
ZLIBDIR = $(TOP)\compat\zlib
!ENDIF

!IFNDEF ZLIBINCDIR
ZLIBINCDIR = $(ZLIBDIR)
!ENDIF

!IFNDEF ZLIBLIBDIR
ZLIBLIBDIR = $(ZLIBDIR)
!ENDIF

!IFNDEF ZLIBLIB
!IF $(DYNAMIC_SHELL)!=0
ZLIBLIB = zdll.lib
!ELSE
ZLIBLIB = zlib.lib
!ENDIF
!ENDIF

# The locations of the ICU header and library files.  These variables
# (ICUINCDIR, ICULIBDIR, and LIBICU) may be overridden via the environment
# prior to running nmake in order to match the actual installed location on
# this machine.
#
!IFNDEF ICUDIR
ICUDIR = $(TOP)\compat\icu
!ENDIF

!IFNDEF ICUINCDIR
ICUINCDIR = $(ICUDIR)\include
!ENDIF

!IFNDEF ICULIBDIR
ICULIBDIR = $(ICUDIR)\lib
!ENDIF

!IFNDEF LIBICU
LIBICU = icuuc.lib icuin.lib
!ENDIF

# This is the command to use for tclsh - normally just "tclsh", but we may
# know the specific version we want to use.  This variable (TCLSH_CMD) may be
# overridden via the environment prior to running nmake in order to select a
# specific Tcl shell to use.
#
!IFNDEF TCLSH_CMD
!IF $(USE_TCLSH_IN_PATH)!=0 || !EXIST("$(TCLDIR)\bin\tclsh.exe")
TCLSH_CMD = tclsh
!ELSE
TCLSH_CMD = $(TCLDIR)\bin\tclsh.exe
!ENDIF
!ENDIF
# <</mark>>

# Compiler options needed for programs that use the readline() library.
#
!IFNDEF READLINE_FLAGS
READLINE_FLAGS = -DHAVE_READLINE=0
!ENDIF

# The library that programs using readline() must link against.
#
!IFNDEF LIBREADLINE
LIBREADLINE =
!ENDIF

# Should the database engine be compiled threadsafe
#
TCC = $(TCC) -DSQLITE_THREADSAFE=1
RCC = $(RCC) -DSQLITE_THREADSAFE=1

# Do threads override each others locks by default (1), or do we test (-1)
#
TCC = $(TCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1
RCC = $(RCC) -DSQLITE_THREAD_OVERRIDE_LOCK=-1

# Any target libraries which libsqlite must be linked against
#
!IFNDEF TLIBS
TLIBS =
!ENDIF

# Flags controlling use of the in memory btree implementation
#
# SQLITE_TEMP_STORE is 0 to force temporary tables to be in a file, 1 to
# default to file, 2 to default to memory, and 3 to force temporary
# tables to always be in memory.
#
TCC = $(TCC) -DSQLITE_TEMP_STORE=1
RCC = $(RCC) -DSQLITE_TEMP_STORE=1

# Enable/disable loadable extensions, and other optional features
# based on configuration. (-DSQLITE_OMIT*, -DSQLITE_ENABLE*).
# The same set of OMIT and ENABLE flags should be passed to the
# LEMON parser generator and the mkkeywordhash tool as well.

# These are the required SQLite compilation options used when compiling for
# the Windows platform.
#
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_MAX_TRIGGER_DEPTH=100

# If we are linking to the RPCRT4 library, enable features that need it.
#
!IF $(USE_RPCRT4_LIB)!=0
REQ_FEATURE_FLAGS = $(REQ_FEATURE_FLAGS) -DSQLITE_WIN32_USE_UUID=1
!ENDIF

# Add the required and optional SQLite compilation options into the command
# lines used to invoke the MSVC code and resource compilers.
#
TCC = $(TCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)
RCC = $(RCC) $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS)

# Add in any optional parameters specified on the commane line, e.g.
# nmake /f Makefile.msc all "OPTS=-DSQLITE_ENABLE_FOO=1 -DSQLITE_OMIT_FOO=1"
#
TCC = $(TCC) $(OPTS)
RCC = $(RCC) $(OPTS)

# If compiling for debugging, add some defines.
#
!IF $(DEBUG)>1
TCC = $(TCC) -D_DEBUG
BCC = $(BCC) -D_DEBUG
RCC = $(RCC) -D_DEBUG
!ENDIF

# If optimizations are enabled or disabled (either implicitly or
# explicitly), add the necessary flags.
#
!IF $(DEBUG)>1 || $(OPTIMIZATIONS)==0
TCC = $(TCC) -Od
BCC = $(BCC) -Od
!IF $(USE_RUNTIME_CHECKS)!=0
TCC = $(TCC) -RTC1
BCC = $(BCC) -RTC1
!ENDIF
!ELSEIF $(OPTIMIZATIONS)>=3
TCC = $(TCC) -Ox
BCC = $(BCC) -Ox
!ELSEIF $(OPTIMIZATIONS)==2
TCC = $(TCC) -O2
BCC = $(BCC) -O2
!ELSEIF $(OPTIMIZATIONS)==1
TCC = $(TCC) -O1
BCC = $(BCC) -O1
!ENDIF

# If symbols are enabled (or compiling for debugging), enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
TCC = $(TCC) -Zi
BCC = $(BCC) -Zi
!ENDIF

# <<mark>>
# If zlib support is enabled, add the compiler options for it.
#
!IF $(USE_ZLIB)!=0
TCC = $(TCC) -DSQLITE_HAVE_ZLIB=1
RCC = $(RCC) -DSQLITE_HAVE_ZLIB=1
TCC = $(TCC) -I$(ZLIBINCDIR)
RCC = $(RCC) -I$(ZLIBINCDIR)
!ENDIF

# If ICU support is enabled, add the compiler options for it.
#
!IF $(USE_ICU)!=0
TCC = $(TCC) -DSQLITE_ENABLE_ICU=1
RCC = $(RCC) -DSQLITE_ENABLE_ICU=1
TCC = $(TCC) -I$(TOP)\ext\icu
RCC = $(RCC) -I$(TOP)\ext\icu
TCC = $(TCC) -I$(ICUINCDIR)
RCC = $(RCC) -I$(ICUINCDIR)
!ENDIF
# <</mark>>

# Command line prefixes for compiling code, compiling resources,
# linking, etc.
#
LTCOMPILE = $(TCC) -Fo$@ -Fd$*.pdb
LTRCOMPILE = $(RCC) -r
LTLIB = lib.exe
LTLINK = $(TCC) -Fe$@

# If requested, link to the RPCRT4 library.
#
!IF $(USE_RPCRT4_LIB)!=0
LTLIBS = $(LTLIBS) rpcrt4.lib
!ENDIF

# If a platform was set, force the linker to target that.
# Note that the vcvars*.bat family of batch files typically
# set this for you.  Otherwise, the linker will attempt
# to deduce the binary type based on the object files.
!IFDEF PLATFORM
LTLINKOPTS = /NOLOGO /MACHINE:$(PLATFORM)
LTLIBOPTS = /NOLOGO /MACHINE:$(PLATFORM)
!ELSEIF "$(VISUALSTUDIOVERSION)"=="12.0" || \
        "$(VISUALSTUDIOVERSION)"=="14.0" || \
        "$(VISUALSTUDIOVERSION)"=="15.0"
LTLINKOPTS = /NOLOGO /MACHINE:x86
LTLIBOPTS = /NOLOGO /MACHINE:x86
!ELSE
LTLINKOPTS = /NOLOGO
LTLIBOPTS = /NOLOGO
!ENDIF

# When compiling for use in the WinRT environment, the following
# linker option must be used to mark the executable as runnable
# only in the context of an application container.
#
!IF $(FOR_WINRT)!=0
LTLINKOPTS = $(LTLINKOPTS) /APPCONTAINER
!IF "$(VISUALSTUDIOVERSION)"=="12.0" || "$(VISUALSTUDIOVERSION)"=="14.0"
!IFNDEF STORELIBPATH
!IF "$(PLATFORM)"=="x86"
STORELIBPATH = $(CRTLIBPATH)\store
!ELSEIF "$(PLATFORM)"=="x64"
STORELIBPATH = $(CRTLIBPATH)\store\amd64
!ELSEIF "$(PLATFORM)"=="ARM"
STORELIBPATH = $(CRTLIBPATH)\store\arm
!ELSE
STORELIBPATH = $(CRTLIBPATH)\store
!ENDIF
!ENDIF
STORELIBPATH = $(STORELIBPATH:\\=\)
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(STORELIBPATH)"
!ENDIF
!ENDIF

# When compiling for Windows Phone 8.1, an extra library path is
# required.
#
!IF $(USE_WP81_OPTS)!=0
!IFNDEF WP81LIBPATH
!IF "$(PLATFORM)"=="x86"
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86
!ELSEIF "$(PLATFORM)"=="ARM"
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\ARM
!ELSE
WP81LIBPATH = $(PROGRAMFILES_X86)\Windows Phone Kits\8.1\lib\x86
!ENDIF
!ENDIF
!ENDIF

# When compiling for Windows Phone 8.1, some extra linker options
# are also required.
#
!IF $(USE_WP81_OPTS)!=0
!IFDEF WP81LIBPATH
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(WP81LIBPATH)"
!ENDIF
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE
LTLINKOPTS = $(LTLINKOPTS) WindowsPhoneCore.lib RuntimeObject.lib PhoneAppModelHost.lib
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:kernel32.lib /NODEFAULTLIB:ole32.lib
!ENDIF

# When compiling for UWP or the Windows 10 platform, some extra linker
# options are also required.
#
!IF $(FOR_UWP)!=0 || $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) /DYNAMICBASE /NODEFAULTLIB:kernel32.lib
LTLINKOPTS = $(LTLINKOPTS) mincore.lib
!IFDEF PSDKLIBPATH
LTLINKOPTS = $(LTLINKOPTS) "/LIBPATH:$(PSDKLIBPATH)"
!ENDIF
!ENDIF

!IF $(FOR_WIN10)!=0
LTLINKOPTS = $(LTLINKOPTS) /guard:cf "/LIBPATH:$(UCRTLIBPATH)"
!IF $(DEBUG)>1
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrtd.lib /DEFAULTLIB:ucrtd.lib
!ELSE
LTLINKOPTS = $(LTLINKOPTS) /NODEFAULTLIB:libucrt.lib /DEFAULTLIB:ucrt.lib
!ENDIF
!ENDIF

# If either debugging or symbols are enabled, enable PDBs.
#
!IF $(DEBUG)>1 || $(SYMBOLS)!=0
LDFLAGS = /DEBUG $(LDOPTS)
!ELSE
LDFLAGS = $(LDOPTS)
!ENDIF

# <<mark>>
# Start with the Tcl related linker options.
#
!IF $(NO_TCL)==0
TCLLIBPATHS = $(TCLLIBPATHS) /LIBPATH:$(TCLLIBDIR)
TCLLIBS = $(TCLLIBS) $(LIBTCL)
!ENDIF

# If zlib support is enabled, add the linker options for it.
#
!IF $(USE_ZLIB)!=0
LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ZLIBLIBDIR)
LTLIBS = $(LTLIBS) $(ZLIBLIB)
!ENDIF

# If ICU support is enabled, add the linker options for it.
#
!IF $(USE_ICU)!=0
LTLIBPATHS = $(LTLIBPATHS) /LIBPATH:$(ICULIBDIR)
LTLIBS = $(LTLIBS) $(LIBICU)
!ENDIF
# <</mark>>

# You should not have to change anything below this line
###############################################################################

# <<mark>>
# Object files for the SQLite library (non-amalgamation).
#
LIBOBJS0 = vdbe.lo parse.lo alter.lo analyze.lo attach.lo auth.lo \
         backup.lo bitvec.lo btmutex.lo btree.lo build.lo \
         callback.lo complete.lo ctime.lo \
         date.lo dbpage.lo dbstat.lo delete.lo \
         expr.lo fault.lo fkey.lo \
         fts3.lo fts3_aux.lo fts3_expr.lo fts3_hash.lo fts3_icu.lo \
         fts3_porter.lo fts3_snippet.lo fts3_tokenizer.lo fts3_tokenizer1.lo \
         fts3_tokenize_vtab.lo fts3_unicode.lo fts3_unicode2.lo fts3_write.lo \
         fts5.lo \
         func.lo global.lo hash.lo \
         icu.lo insert.lo json.lo legacy.lo loadext.lo \
         main.lo malloc.lo mem0.lo mem1.lo mem2.lo mem3.lo mem5.lo \
         memdb.lo memjournal.lo \
         mutex.lo mutex_noop.lo mutex_unix.lo mutex_w32.lo \
         notify.lo opcodes.lo os.lo os_kv.lo os_unix.lo os_win.lo \
         pager.lo pcache.lo pcache1.lo pragma.lo prepare.lo printf.lo \
         random.lo resolve.lo rowset.lo rtree.lo \
         sqlite3session.lo select.lo sqlite3rbu.lo status.lo stmt.lo \
         table.lo threads.lo tokenize.lo treeview.lo trigger.lo \
         update.lo upsert.lo util.lo vacuum.lo \
         vdbeapi.lo vdbeaux.lo vdbeblob.lo vdbemem.lo vdbesort.lo \
         vdbetrace.lo vdbevtab.lo wal.lo walker.lo where.lo wherecode.lo \
         whereexpr.lo \
         window.lo utf.lo vtab.lo
# <</mark>>

# Object files for the amalgamation.
#
LIBOBJS1 = sqlite3.lo

# Determine the real value of LIBOBJ based on the 'configure' script
#
# <<mark>>
!IF $(USE_AMALGAMATION)==0
LIBOBJ = $(LIBOBJS0)
!ELSE
# <</mark>>
LIBOBJ = $(LIBOBJS1)
# <<mark>>
!ENDIF
# <</mark>>

# Determine if embedded resource compilation and usage are enabled.
#
!IF $(USE_RC)!=0
LIBRESOBJS = sqlite3res.lo
!ELSE
LIBRESOBJS =
!ENDIF

# <<mark>>
# Core source code files, part 1.
#
SRC00 = \
  $(TOP)\src\alter.c \
  $(TOP)\src\analyze.c \
  $(TOP)\src\attach.c \
  $(TOP)\src\auth.c \
  $(TOP)\src\backup.c \
  $(TOP)\src\bitvec.c \
  $(TOP)\src\btmutex.c \
  $(TOP)\src\btree.c \
  $(TOP)\src\build.c \
  $(TOP)\src\callback.c \
  $(TOP)\src\complete.c \
  $(TOP)\src\ctime.c \
  $(TOP)\src\date.c \
  $(TOP)\src\dbpage.c \
  $(TOP)\src\dbstat.c \
  $(TOP)\src\delete.c \
  $(TOP)\src\expr.c \
  $(TOP)\src\fault.c \
  $(TOP)\src\fkey.c \
  $(TOP)\src\func.c \
  $(TOP)\src\global.c \
  $(TOP)\src\hash.c \
  $(TOP)\src\insert.c \
  $(TOP)\src\json.c \
  $(TOP)\src\legacy.c \
  $(TOP)\src\loadext.c \
  $(TOP)\src\main.c \
  $(TOP)\src\malloc.c \
  $(TOP)\src\mem0.c \
  $(TOP)\src\mem1.c \
  $(TOP)\src\mem2.c \
  $(TOP)\src\mem3.c \
  $(TOP)\src\mem5.c \
  $(TOP)\src\memdb.c \
  $(TOP)\src\memjournal.c \
  $(TOP)\src\mutex.c \
  $(TOP)\src\mutex_noop.c \
  $(TOP)\src\mutex_unix.c \
  $(TOP)\src\mutex_w32.c \
  $(TOP)\src\notify.c \
  $(TOP)\src\os.c \
  $(TOP)\src\os_kv.c \
  $(TOP)\src\os_unix.c \
  $(TOP)\src\os_win.c

# Core source code files, part 2.
#
SRC01 = \
  $(TOP)\src\pager.c \
  $(TOP)\src\pcache.c \
  $(TOP)\src\pcache1.c \
  $(TOP)\src\pragma.c \
  $(TOP)\src\prepare.c \
  $(TOP)\src\printf.c \
  $(TOP)\src\random.c \
  $(TOP)\src\resolve.c \
  $(TOP)\src\rowset.c \
  $(TOP)\src\select.c \
  $(TOP)\src\status.c \
  $(TOP)\src\table.c \
  $(TOP)\src\threads.c \
  $(TOP)\src\tclsqlite.c \
  $(TOP)\src\tokenize.c \
  $(TOP)\src\treeview.c \
  $(TOP)\src\trigger.c \
  $(TOP)\src\utf.c \
  $(TOP)\src\update.c \
  $(TOP)\src\upsert.c \
  $(TOP)\src\util.c \
  $(TOP)\src\vacuum.c \
  $(TOP)\src\vdbe.c \
  $(TOP)\src\vdbeapi.c \
  $(TOP)\src\vdbeaux.c \
  $(TOP)\src\vdbeblob.c \
  $(TOP)\src\vdbemem.c \
  $(TOP)\src\vdbesort.c \
  $(TOP)\src\vdbetrace.c \
  $(TOP)\src\vdbevtab.c \
  $(TOP)\src\vtab.c \
  $(TOP)\src\wal.c \
  $(TOP)\src\walker.c \
  $(TOP)\src\where.c \
  $(TOP)\src\wherecode.c \
  $(TOP)\src\whereexpr.c \
  $(TOP)\src\window.c

# Core miscellaneous files.
#
SRC03 = \
  $(TOP)\src\parse.y

# Core header files, part 1.
#
SRC04 = \
  $(TOP)\src\btree.h \
  $(TOP)\src\btreeInt.h \
  $(TOP)\src\hash.h \
  $(TOP)\src\hwtime.h \
  $(TOP)\src\msvc.h \
  $(TOP)\src\mutex.h \
  $(TOP)\src\os.h \
  $(TOP)\src\os_common.h \
  $(TOP)\src\os_setup.h \
  $(TOP)\src\os_win.h

# Core header files, part 2.
#
SRC05 = \
  $(TOP)\src\pager.h \
  $(TOP)\src\pcache.h \
  $(TOP)\src\pragma.h \
  $(TOP)\src\sqlite.h.in \
  $(TOP)\src\sqlite3ext.h \
  $(TOP)\src\sqliteInt.h \
  $(TOP)\src\sqliteLimit.h \
  $(TOP)\src\vdbe.h \
  $(TOP)\src\vdbeInt.h \
  $(TOP)\src\vxworks.h \
  $(TOP)\src\wal.h \
  $(TOP)\src\whereInt.h

# Extension source code files, part 1.
#
SRC06 = \
  $(TOP)\ext\fts1\fts1.c \
  $(TOP)\ext\fts1\fts1_hash.c \
  $(TOP)\ext\fts1\fts1_porter.c \
  $(TOP)\ext\fts1\fts1_tokenizer1.c \
  $(TOP)\ext\fts2\fts2.c \
  $(TOP)\ext\fts2\fts2_hash.c \
  $(TOP)\ext\fts2\fts2_icu.c \
  $(TOP)\ext\fts2\fts2_porter.c \
  $(TOP)\ext\fts2\fts2_tokenizer.c \
  $(TOP)\ext\fts2\fts2_tokenizer1.c

# Extension source code files, part 2.
#
SRC07 = \
  $(TOP)\ext\fts3\fts3.c \
  $(TOP)\ext\fts3\fts3_aux.c \
  $(TOP)\ext\fts3\fts3_expr.c \
  $(TOP)\ext\fts3\fts3_hash.c \
  $(TOP)\ext\fts3\fts3_icu.c \
  $(TOP)\ext\fts3\fts3_porter.c \
  $(TOP)\ext\fts3\fts3_snippet.c \
  $(TOP)\ext\fts3\fts3_tokenizer.c \
  $(TOP)\ext\fts3\fts3_tokenizer1.c \
  $(TOP)\ext\fts3\fts3_tokenize_vtab.c \
  $(TOP)\ext\fts3\fts3_unicode.c \
  $(TOP)\ext\fts3\fts3_unicode2.c \
  $(TOP)\ext\fts3\fts3_write.c \
  $(TOP)\ext\icu\icu.c \
  $(TOP)\ext\rtree\rtree.c \
  $(TOP)\ext\session\sqlite3session.c \
  $(TOP)\ext\rbu\sqlite3rbu.c \
  $(TOP)\ext\misc\stmt.c

# Extension header files, part 1.
#
SRC08 = \
  $(TOP)\ext\fts1\fts1.h \
  $(TOP)\ext\fts1\fts1_hash.h \
  $(TOP)\ext\fts1\fts1_tokenizer.h \
  $(TOP)\ext\fts2\fts2.h \
  $(TOP)\ext\fts2\fts2_hash.h \
  $(TOP)\ext\fts2\fts2_tokenizer.h

# Extension header files, part 2.
#
SRC09 = \
  $(TOP)\ext\fts3\fts3.h \
  $(TOP)\ext\fts3\fts3Int.h \
  $(TOP)\ext\fts3\fts3_hash.h \
  $(TOP)\ext\fts3\fts3_tokenizer.h \
  $(TOP)\ext\icu\sqliteicu.h \
  $(TOP)\ext\rtree\rtree.h \
  $(TOP)\ext\rtree\geopoly.c \
  $(TOP)\ext\rbu\sqlite3rbu.h \
  $(TOP)\ext\session\sqlite3session.h

# Generated source code files
#
SRC10 = \
  opcodes.c \
  parse.c

# Generated header files
#
SRC11 = \
  keywordhash.h \
  opcodes.h \
  parse.h \
  shell.c \
  $(SQLITE3H)

# Generated Tcl header files
#
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
SRC12 = \
  $(SQLITETCLH) \
  $(SQLITETCLDECLSH)
!ELSE
SRC12 =
!ENDIF

# All source code files.
#
SRC = $(SRC00) $(SRC01) $(SRC03) $(SRC04) $(SRC05) $(SRC06) $(SRC07) $(SRC08) $(SRC09) $(SRC10) $(SRC11) $(SRC12)

# Source code to the test files.
#
TESTSRC = \
  $(TOP)\src\test1.c \
  $(TOP)\src\test2.c \
  $(TOP)\src\test3.c \
  $(TOP)\src\test4.c \
  $(TOP)\src\test5.c \
  $(TOP)\src\test6.c \
  $(TOP)\src\test7.c \
  $(TOP)\src\test8.c \
  $(TOP)\src\test9.c \
  $(TOP)\src\test_autoext.c \
  $(TOP)\src\test_async.c \
  $(TOP)\src\test_backup.c \
  $(TOP)\src\test_bestindex.c \
  $(TOP)\src\test_blob.c \
  $(TOP)\src\test_btree.c \
  $(TOP)\src\test_config.c \
  $(TOP)\src\test_delete.c \
  $(TOP)\src\test_demovfs.c \
  $(TOP)\src\test_devsym.c \
  $(TOP)\src\test_fs.c \
  $(TOP)\src\test_func.c \
  $(TOP)\src\test_hexio.c \
  $(TOP)\src\test_init.c \
  $(TOP)\src\test_intarray.c \
  $(TOP)\src\test_journal.c \
  $(TOP)\src\test_malloc.c \
  $(TOP)\src\test_md5.c \
  $(TOP)\src\test_multiplex.c \
  $(TOP)\src\test_mutex.c \
  $(TOP)\src\test_onefile.c \
  $(TOP)\src\test_osinst.c \
  $(TOP)\src\test_pcache.c \
  $(TOP)\src\test_quota.c \
  $(TOP)\src\test_rtree.c \
  $(TOP)\src\test_schema.c \
  $(TOP)\src\test_server.c \
  $(TOP)\src\test_superlock.c \
  $(TOP)\src\test_syscall.c \
  $(TOP)\src\test_tclsh.c \
  $(TOP)\src\test_tclvar.c \
  $(TOP)\src\test_thread.c \
  $(TOP)\src\test_vdbecov.c \
  $(TOP)\src\test_vfs.c \
  $(TOP)\src\test_windirent.c \
  $(TOP)\src\test_window.c \
  $(TOP)\src\test_wsd.c \
  $(TOP)\ext\fts3\fts3_term.c \
  $(TOP)\ext\fts3\fts3_test.c \
  $(TOP)\ext\rbu\test_rbu.c \
  $(TOP)\ext\session\test_session.c 

# Statically linked extensions.
#
TESTEXT = \
  $(TOP)\ext\expert\sqlite3expert.c \
  $(TOP)\ext\expert\test_expert.c \
  $(TOP)\ext\misc\amatch.c \
  $(TOP)\ext\misc\appendvfs.c \
  $(TOP)\ext\misc\carray.c \
  $(TOP)\ext\misc\cksumvfs.c \
  $(TOP)\ext\misc\closure.c \
  $(TOP)\ext\misc\csv.c \
  $(TOP)\ext\misc\decimal.c \
  $(TOP)\ext\misc\eval.c \
  $(TOP)\ext\misc\explain.c \
  $(TOP)\ext\misc\fileio.c \
  $(TOP)\ext\misc\fuzzer.c \
  $(TOP)\ext\fts5\fts5_tcl.c \
  $(TOP)\ext\fts5\fts5_test_mi.c \
  $(TOP)\ext\fts5\fts5_test_tok.c \
  $(TOP)\ext\misc\ieee754.c \
  $(TOP)\ext\misc\mmapwarm.c \
  $(TOP)\ext\misc\nextchar.c \
  $(TOP)\ext\misc\normalize.c \
  $(TOP)\ext\misc\percentile.c \
  $(TOP)\ext\misc\prefixes.c \
  $(TOP)\ext\misc\qpvtab.c \
  $(TOP)\ext\misc\regexp.c \
  $(TOP)\ext\misc\remember.c \
  $(TOP)\ext\misc\series.c \
  $(TOP)\ext\misc\spellfix.c \
  $(TOP)\ext\misc\totype.c \
  $(TOP)\ext\misc\unionvtab.c \
  $(TOP)\ext\misc\wholenumber.c \
  $(TOP)\ext\rtree\test_rtreedoc.c \
  $(TOP)\ext\recover\sqlite3recover.c \
  $(TOP)\ext\recover\test_recover.c \
  $(TOP)\ext\recover\dbdata.c \
  fts5.c

# If use of zlib is enabled, add the "zipfile.c" source file.
#
!IF $(USE_ZLIB)!=0
TESTEXT = $(TESTEXT) $(TOP)\ext\misc\zipfile.c
!ENDIF

# Source code to the library files needed by the test fixture
# (non-amalgamation)
#
TESTSRC2 = \
  $(SRC00) \
  $(SRC01) \
  $(SRC06) \
  $(SRC07) \
  $(SRC10) \
  $(TOP)\ext\async\sqlite3async.c

# Header files used by all library source files.
#
HDR = \
   $(TOP)\src\btree.h \
   $(TOP)\src\btreeInt.h \
   $(TOP)\src\hash.h \
   $(TOP)\src\hwtime.h \
   keywordhash.h \
   $(TOP)\src\msvc.h \
   $(TOP)\src\mutex.h \
   opcodes.h \
   $(TOP)\src\os.h \
   $(TOP)\src\os_common.h \
   $(TOP)\src\os_setup.h \
   $(TOP)\src\os_win.h \
   $(TOP)\src\pager.h \
   $(TOP)\src\pcache.h \
   parse.h \
   $(TOP)\src\pragma.h \
   $(SQLITE3H) \
   sqlite3ext.h \
   $(TOP)\src\sqliteInt.h \
   $(TOP)\src\sqliteLimit.h \
   $(TOP)\src\vdbe.h \
   $(TOP)\src\vdbeInt.h \
   $(TOP)\src\vxworks.h \
   $(TOP)\src\whereInt.h

# Header files used by extensions
#
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\fts1\fts1.h \
  $(TOP)\ext\fts1\fts1_hash.h \
  $(TOP)\ext\fts1\fts1_tokenizer.h
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\fts2\fts2.h \
  $(TOP)\ext\fts2\fts2_hash.h \
  $(TOP)\ext\fts2\fts2_tokenizer.h
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\fts3\fts3.h \
  $(TOP)\ext\fts3\fts3Int.h \
  $(TOP)\ext\fts3\fts3_hash.h \
  $(TOP)\ext\fts3\fts3_tokenizer.h
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\rtree\rtree.h \
  $(TOP)\ext\rtree\geopoly.c
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\icu\sqliteicu.h
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\rtree\sqlite3rtree.h
EXTHDR = $(EXTHDR) \
  $(TOP)\ext\session\sqlite3session.h

# executables needed for testing
#
TESTPROGS = \
  testfixture.exe \
  $(SQLITE3EXE) \
  sqlite3_analyzer.exe \
  sqlite3_checker.exe \
  sqldiff.exe \
  dbhash.exe \
  sqltclsh.exe

# Databases containing fuzzer test cases
#
FUZZDATA = \
  $(TOP)\test\fuzzdata1.db \
  $(TOP)\test\fuzzdata2.db \
  $(TOP)\test\fuzzdata3.db \
  $(TOP)\test\fuzzdata4.db \
  $(TOP)\test\fuzzdata5.db \
  $(TOP)\test\fuzzdata6.db \
  $(TOP)\test\fuzzdata7.db \
  $(TOP)\test\fuzzdata8.db
# <</mark>>

# Additional compiler options for the shell.  These are only effective
# when the shell is not being dynamically linked.
#
!IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_FTS4=1
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS=1
SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC=1
!ENDIF

# <<mark>>
# Extra compiler options for various test tools.
#
MPTESTER_COMPILE_OPTS = -DSQLITE_ENABLE_FTS5
FUZZERSHELL_COMPILE_OPTS =
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -I$(TOP)\test -I$(TOP)\ext\recover
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_MEMSYS5
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_OSS_FUZZ
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_MAX_MEMORY=50000000
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_PRINTF_PRECISION_LIMIT=1000
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS4
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_FTS5
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_RTREE
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_GEOPOLY
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_DBSTAT_VTAB
FUZZCHECK_OPTS = $(FUZZCHECK_OPTS) -DSQLITE_ENABLE_BYTECODE_VTAB
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\fuzzcheck.c
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\ossfuzz.c
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\fuzzinvariants.c
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\test\vt02.c
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\recover\dbdata.c
FUZZCHECK_SRC = $(FUZZCHECK_SRC) $(TOP)\ext\recover\sqlite3recover.c

OSSSHELL_SRC = $(TOP)\test\ossshell.c $(TOP)\test\ossfuzz.c
DBFUZZ_COMPILE_OPTS = -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION
KV_COMPILE_OPTS = -DSQLITE_THREADSAFE=0 -DSQLITE_DIRECT_OVERFLOW_READ
ST_COMPILE_OPTS = -DSQLITE_THREADSAFE=0

# Standard options to testfixture.
#
TESTOPTS = --verbose=file --output=test-out.txt

# Extra targets for the "all" target that require Tcl.
#
!IF $(NO_TCL)==0
ALL_TCL_TARGETS = $(SQLITE3TCLDLL)
!ELSE
ALL_TCL_TARGETS =
!ENDIF
# <</mark>>

# This is the default Makefile target.  The objects listed here
# are what get build when you type just "make" with no arguments.
#
core:	dll libsqlite3.lib shell

# Targets that require the Tcl library.
#
tcl:	$(ALL_TCL_TARGETS)

# This Makefile target builds all of the standard binaries.
#
all:	core tcl

# Dynamic link library section.
#
dll:	$(SQLITE3DLL)

# Shell executable.
#
shell:	$(SQLITE3EXE)

# <<mark>>
libsqlite3.lib:	$(LIBOBJ)
	$(LTLIB) $(LTLIBOPTS) /OUT:$@ $(LIBOBJ) $(TLIBS)

libtclsqlite3.lib:	tclsqlite.lo libsqlite3.lib
	$(LTLIB) $(LTLIBOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) /OUT:$@ tclsqlite.lo libsqlite3.lib $(LIBTCLSTUB) $(TLIBS)

tclsqlite3.def:	tclsqlite.lo
	echo EXPORTS > tclsqlite3.def
	dumpbin /all tclsqlite.lo \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl include "^\s+/EXPORT:_?((?:Sqlite3|Tclsqlite3)_[^@]*)(?:@\d+)?$$" \1 \
		| sort >> tclsqlite3.def

pkgIndex.tcl:	$(TOP)\VERSION
	for /F %%V in ('type "$(TOP)\VERSION"') do ( \
		echo package ifneeded sqlite3 @version@ [list load [file join $$dir $(SQLITE3TCLDLL)] sqlite3] \
			| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact @version@ %%V > pkgIndex.tcl \
	)

$(SQLITE3TCLDLL):	libtclsqlite3.lib $(LIBRESOBJS) tclsqlite3.def pkgIndex.tcl
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /DEF:tclsqlite3.def /OUT:$@ libtclsqlite3.lib $(LIBRESOBJS) $(LTLIBS) $(TLIBS)
# <</mark>>

$(SQLITE3DLL):	$(LIBOBJ) $(LIBRESOBJS) $(CORE_LINK_DEP)
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL $(CORE_LINK_OPTS) /OUT:$@ $(LIBOBJ) $(LIBRESOBJS) $(LTLIBS) $(TLIBS)

# <<block2>>
sqlite3.def:	libsqlite3.lib
	echo EXPORTS > sqlite3.def
	dumpbin /all libsqlite3.lib \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl include "^\s+1 _?(sqlite3(?:session|changeset|changegroup|rebaser|rbu)?_[^@]*)(?:@\d+)?$$" \1 \
		| sort >> sqlite3.def
# <</block2>>

$(SQLITE3EXE):	shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H)
	$(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) shell.c $(SHELL_CORE_SRC) \
		/link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS)

# <<mark>>
sqldiff.exe:	$(TOP)\tool\sqldiff.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(TOP)\tool\sqldiff.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

dbhash.exe:	$(TOP)\tool\dbhash.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(TOP)\tool\dbhash.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

scrub.exe:	$(TOP)\ext\misc\scrub.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSCRUB_STANDALONE=1 $(TOP)\ext\misc\scrub.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

srcck1.exe:	$(TOP)\tool\srcck1.c
	$(BCC) $(NO_WARN) -Fe$@ $(TOP)\tool\srcck1.c

sourcetest:	srcck1.exe $(SQLITE3C)
	srcck1.exe $(SQLITE3C)

fuzzershell.exe:	$(TOP)\tool\fuzzershell.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(FUZZERSHELL_COMPILE_OPTS) $(TOP)\tool\fuzzershell.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

dbfuzz.exe:	$(TOP)\test\dbfuzz.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(DBFUZZ_COMPILE_OPTS) $(TOP)\test\dbfuzz.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

fuzzcheck.exe:	$(FUZZCHECK_SRC) $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(FUZZCHECK_OPTS) $(FUZZCHECK_SRC) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

ossshell.exe:	$(OSSSHELL_SRC) $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(FUZZCHECK_OPTS) $(OSSSHELL_SRC) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

sessionfuzz.exe:	zlib $(TOP)\test\sessionfuzz.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -I$(ZLIBINCDIR) $(TOP)\test\sessionfuzz.c /link $(LDFLAGS) $(LTLINKOPTS) /LIBPATH:$(ZLIBLIBDIR) $(ZLIBLIB)

mptester.exe:	$(TOP)\mptest\mptest.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(MPTESTER_COMPILE_OPTS) $(TOP)\mptest\mptest.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

MPTEST1 = mptester mptest.db $(TOP)\mptest\crash01.test --repeat 20
MPTEST2 = mptester mptest.db $(TOP)\mptest\multiwrite01.test --repeat 20

mptest:	mptester.exe
	del /Q mptest.db 2>NUL
	$(MPTEST1) --journalmode DELETE
	$(MPTEST2) --journalmode WAL
	$(MPTEST1) --journalmode WAL
	$(MPTEST2) --journalmode PERSIST
	$(MPTEST1) --journalmode PERSIST
	$(MPTEST2) --journalmode TRUNCATE
	$(MPTEST1) --journalmode TRUNCATE
	$(MPTEST2) --journalmode DELETE

# This target creates a directory named "tsrc" and fills it with
# copies of all of the C source code and header files needed to
# build on the target system.  Some of the C source code and header
# files are automatically generated.  This target takes care of
# all that automatic generation.
#
.target_source:	$(SRC) $(TOP)\tool\vdbe-compress.tcl fts5.c $(SQLITE_TCL_DEP)
	-rmdir /Q/S tsrc 2>NUL
	-mkdir tsrc
	for %i in ($(SRC00)) do copy /Y %i tsrc
	for %i in ($(SRC01)) do copy /Y %i tsrc
	for %i in ($(SRC03)) do copy /Y %i tsrc
	for %i in ($(SRC04)) do copy /Y %i tsrc
	for %i in ($(SRC05)) do copy /Y %i tsrc
	for %i in ($(SRC06)) do copy /Y %i tsrc
	for %i in ($(SRC07)) do copy /Y %i tsrc
	for %i in ($(SRC08)) do copy /Y %i tsrc
	for %i in ($(SRC09)) do copy /Y %i tsrc
	for %i in ($(SRC10)) do copy /Y %i tsrc
	for %i in ($(SRC11)) do copy /Y %i tsrc
	for %i in ($(SRC12)) do copy /Y %i tsrc
	copy /Y fts5.c tsrc
	copy /B tsrc\fts5.c +,,
	copy /Y fts5.h tsrc
	copy /B tsrc\fts5.h +,,
	del /Q tsrc\sqlite.h.in tsrc\parse.y 2>NUL
	$(TCLSH_CMD) $(TOP)\tool\vdbe-compress.tcl $(OPTS) < tsrc\vdbe.c > vdbe.new
	move vdbe.new tsrc\vdbe.c
	echo > .target_source

sqlite3.c:	.target_source sqlite3ext.h sqlite3session.h $(MKSQLITE3C_TOOL)
	$(TCLSH_CMD) $(MKSQLITE3C_TOOL) $(MKSQLITE3C_ARGS)

sqlite3-all.c:	sqlite3.c $(TOP)\tool\split-sqlite3c.tcl
	$(TCLSH_CMD) $(TOP)\tool\split-sqlite3c.tcl
# <</mark>>

# Rule to build the amalgamation
#
sqlite3.lo:	$(SQLITE3C)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(SQLITE3C)

# <<mark>>
# Rules to build the LEMON compiler generator
#
lempar.c:	$(TOP)\tool\lempar.c
	copy /Y $(TOP)\tool\lempar.c .
	copy /B lempar.c +,,

lemon.exe:	$(TOP)\tool\lemon.c lempar.c
	$(BCC) $(NO_WARN) -Daccess=_access \
		-Fe$@ $(TOP)\tool\lemon.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS)

# <<mark>>
# Rules to build the source-id generator tool
#
mksourceid.exe:	$(TOP)\tool\mksourceid.c
	$(BCC) $(NO_WARN) -Fe$@ $(TOP)\tool\mksourceid.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS)

# Rules to build individual *.lo files from generated *.c files. This
# applies to:
#
#     parse.lo
#     opcodes.lo
#
parse.lo:	parse.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c parse.c

opcodes.lo:	opcodes.c
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c opcodes.c
# <</mark>>

# Rule to build the Win32 resources object file.
#
!IF $(USE_RC)!=0
# <<block1>>
$(LIBRESOBJS):	$(TOP)\src\sqlite3.rc $(SQLITE3H) $(TOP)\VERSION
	echo #ifndef SQLITE_RESOURCE_VERSION > sqlite3rc.h
	for /F %%V in ('type "$(TOP)\VERSION"') do ( \
		echo #define SQLITE_RESOURCE_VERSION %%V \
			| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact . ^, >> sqlite3rc.h \
	)
	echo #endif >> sqlite3rc.h
	$(LTRCOMPILE) -fo $(LIBRESOBJS) $(TOP)\src\sqlite3.rc
# <</block1>>
!ENDIF

# <<mark>>
# Rules to build individual *.lo files from files in the src directory.
#
alter.lo:	$(TOP)\src\alter.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\alter.c

analyze.lo:	$(TOP)\src\analyze.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\analyze.c

attach.lo:	$(TOP)\src\attach.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\attach.c

auth.lo:	$(TOP)\src\auth.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\auth.c

backup.lo:	$(TOP)\src\backup.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\backup.c

bitvec.lo:	$(TOP)\src\bitvec.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\bitvec.c

btmutex.lo:	$(TOP)\src\btmutex.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btmutex.c

btree.lo:	$(TOP)\src\btree.c $(HDR) $(TOP)\src\pager.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\btree.c

build.lo:	$(TOP)\src\build.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\build.c

callback.lo:	$(TOP)\src\callback.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\callback.c

complete.lo:	$(TOP)\src\complete.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\complete.c

ctime.lo:	$(TOP)\src\ctime.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\ctime.c

date.lo:	$(TOP)\src\date.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\date.c

dbpage.lo:	$(TOP)\src\dbpage.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\dbpage.c

dbstat.lo:	$(TOP)\src\dbstat.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\dbstat.c

delete.lo:	$(TOP)\src\delete.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\delete.c

expr.lo:	$(TOP)\src\expr.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\expr.c

fault.lo:	$(TOP)\src\fault.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fault.c

fkey.lo:	$(TOP)\src\fkey.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\fkey.c

func.lo:	$(TOP)\src\func.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\func.c

global.lo:	$(TOP)\src\global.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\global.c

hash.lo:	$(TOP)\src\hash.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\hash.c

insert.lo:	$(TOP)\src\insert.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\insert.c

json.lo:	$(TOP)\src\json.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\json.c

legacy.lo:	$(TOP)\src\legacy.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\legacy.c

loadext.lo:	$(TOP)\src\loadext.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\loadext.c

main.lo:	$(TOP)\src\main.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\main.c

malloc.lo:	$(TOP)\src\malloc.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\malloc.c

mem0.lo:	$(TOP)\src\mem0.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem0.c

mem1.lo:	$(TOP)\src\mem1.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem1.c

mem2.lo:	$(TOP)\src\mem2.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem2.c

mem3.lo:	$(TOP)\src\mem3.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem3.c

mem5.lo:	$(TOP)\src\mem5.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mem5.c

memdb.lo:	$(TOP)\src\memdb.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memdb.c

memjournal.lo:	$(TOP)\src\memjournal.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\memjournal.c

mutex.lo:	$(TOP)\src\mutex.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex.c

mutex_noop.lo:	$(TOP)\src\mutex_noop.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_noop.c

mutex_unix.lo:	$(TOP)\src\mutex_unix.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_unix.c

mutex_w32.lo:	$(TOP)\src\mutex_w32.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\mutex_w32.c

notify.lo:	$(TOP)\src\notify.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\notify.c

pager.lo:	$(TOP)\src\pager.c $(HDR) $(TOP)\src\pager.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pager.c

pcache.lo:	$(TOP)\src\pcache.c $(HDR) $(TOP)\src\pcache.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache.c

pcache1.lo:	$(TOP)\src\pcache1.c $(HDR) $(TOP)\src\pcache.h
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pcache1.c

os.lo:	$(TOP)\src\os.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os.c

os_kv.lo:	$(TOP)\src\os_kv.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_kv.c

os_unix.lo:	$(TOP)\src\os_unix.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_unix.c

os_win.lo:	$(TOP)\src\os_win.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\os_win.c

pragma.lo:	$(TOP)\src\pragma.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\pragma.c

prepare.lo:	$(TOP)\src\prepare.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\prepare.c

printf.lo:	$(TOP)\src\printf.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\printf.c

random.lo:	$(TOP)\src\random.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\random.c

resolve.lo:	$(TOP)\src\resolve.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\resolve.c

rowset.lo:	$(TOP)\src\rowset.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\rowset.c

select.lo:	$(TOP)\src\select.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\select.c

status.lo:	$(TOP)\src\status.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\status.c

table.lo:	$(TOP)\src\table.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\table.c

threads.lo:	$(TOP)\src\threads.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\threads.c

tokenize.lo:	$(TOP)\src\tokenize.c keywordhash.h $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\tokenize.c

treeview.lo:	$(TOP)\src\treeview.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\treeview.c

trigger.lo:	$(TOP)\src\trigger.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\trigger.c

update.lo:	$(TOP)\src\update.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\update.c

upsert.lo:	$(TOP)\src\upsert.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\upsert.c

utf.lo:	$(TOP)\src\utf.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\utf.c

util.lo:	$(TOP)\src\util.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\util.c

vacuum.lo:	$(TOP)\src\vacuum.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vacuum.c

vdbe.lo:	$(TOP)\src\vdbe.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbe.c

vdbeapi.lo:	$(TOP)\src\vdbeapi.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeapi.c

vdbeaux.lo:	$(TOP)\src\vdbeaux.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeaux.c

vdbeblob.lo:	$(TOP)\src\vdbeblob.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbeblob.c

vdbemem.lo:	$(TOP)\src\vdbemem.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbemem.c

vdbesort.lo:	$(TOP)\src\vdbesort.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbesort.c

vdbetrace.lo:	$(TOP)\src\vdbetrace.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbetrace.c

vdbevtab.lo:	$(TOP)\src\vdbevtab.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vdbevtab.c

vtab.lo:	$(TOP)\src\vtab.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\vtab.c

wal.lo:	$(TOP)\src\wal.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wal.c

walker.lo:	$(TOP)\src\walker.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\walker.c

where.lo:	$(TOP)\src\where.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\where.c

wherecode.lo:	$(TOP)\src\wherecode.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\wherecode.c

whereexpr.lo:	$(TOP)\src\whereexpr.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\whereexpr.c

window.lo:	$(TOP)\src\window.c $(HDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) -c $(TOP)\src\window.c

tclsqlite.lo:	$(TOP)\src\tclsqlite.c $(HDR) $(SQLITE_TCL_DEP)
	$(LTCOMPILE) $(NO_WARN) -DUSE_TCL_STUBS=1 -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c

tclsqlite-shell.lo:	$(TOP)\src\tclsqlite.c $(HDR) $(SQLITE_TCL_DEP)
	$(LTCOMPILE) $(NO_WARN) -DTCLSH -DBUILD_sqlite -I$(TCLINCDIR) -c $(TOP)\src\tclsqlite.c

tclsqlite3.exe:	tclsqlite-shell.lo $(SQLITE3C) $(SQLITE3H) $(LIBRESOBJS)
	$(LTLINK) $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) /OUT:$@ tclsqlite-shell.lo $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS)

# Rules to build opcodes.c and opcodes.h
#
opcodes.c:	opcodes.h $(TOP)\tool\mkopcodec.tcl
	$(TCLSH_CMD) $(TOP)\tool\mkopcodec.tcl opcodes.h > opcodes.c

opcodes.h:	parse.h $(TOP)\src\vdbe.c $(TOP)\tool\mkopcodeh.tcl
	type parse.h $(TOP)\src\vdbe.c | $(TCLSH_CMD) $(TOP)\tool\mkopcodeh.tcl > opcodes.h

# Rules to build parse.c and parse.h - the outputs of lemon.
#
parse.h:	parse.c

parse.c:	$(TOP)\src\parse.y lemon.exe
	del /Q parse.y parse.h parse.h.temp 2>NUL
	copy /Y $(TOP)\src\parse.y .
	copy /B parse.y +,,
	.\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) -S parse.y

$(SQLITE3H):	$(TOP)\src\sqlite.h.in $(TOP)\manifest mksourceid.exe $(TOP)\VERSION
	$(TCLSH_CMD) $(TOP)\tool\mksqlite3h.tcl $(TOP:\=/) > $(SQLITE3H) $(MKSQLITE3H_ARGS)

sqlite3ext.h:	.target_source
!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
	type tsrc\sqlite3ext.h | $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*\)" "(SQLITE_CALLBACK *)" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*" "(SQLITE_APICALL *" > sqlite3ext.h
	copy /Y sqlite3ext.h tsrc\sqlite3ext.h
!ELSE
	copy /Y tsrc\sqlite3ext.h sqlite3ext.h
	copy /B sqlite3ext.h +,,
!ENDIF

sqlite3session.h:	$(TOP)\ext\session\sqlite3session.h
	copy /Y $(TOP)\ext\session\sqlite3session.h .
	copy /B sqlite3session.h +,,

mkkeywordhash.exe:	$(TOP)\tool\mkkeywordhash.c
	$(BCC) $(NO_WARN) -Fe$@ $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) \
		$(TOP)\tool\mkkeywordhash.c /link $(LDFLAGS) $(NLTLINKOPTS) $(NLTLIBPATHS)

keywordhash.h:	$(TOP)\tool\mkkeywordhash.c mkkeywordhash.exe
	.\mkkeywordhash.exe > keywordhash.h

# Source files that go into making shell.c
SHELL_SRC = \
	$(TOP)\src\shell.c.in \
	$(TOP)\ext\misc\appendvfs.c \
	$(TOP)\ext\misc\completion.c \
	$(TOP)\ext\misc\decimal.c \
	$(TOP)\ext\misc\fileio.c \
	$(TOP)\ext\misc\ieee754.c \
	$(TOP)\ext\misc\regexp.c \
	$(TOP)\ext\misc\series.c \
	$(TOP)\ext\misc\shathree.c \
	$(TOP)\ext\misc\uint.c \
	$(TOP)\ext\expert\sqlite3expert.c \
	$(TOP)\ext\expert\sqlite3expert.h \
	$(TOP)\ext\misc\memtrace.c \
	$(TOP)/ext/recover/dbdata.c \
	$(TOP)/ext/recover/sqlite3recover.c \
	$(TOP)/ext/recover/sqlite3recover.h \
	$(TOP)\src\test_windirent.c

# If use of zlib is enabled, add the "zipfile.c" source file.
#
!IF $(USE_ZLIB)!=0
SHELL_SRC = $(SHELL_SRC) $(TOP)\ext\misc\sqlar.c
SHELL_SRC = $(SHELL_SRC) $(TOP)\ext\misc\zipfile.c
!ENDIF

shell.c:	$(SHELL_SRC) $(TOP)\tool\mkshellc.tcl
	$(TCLSH_CMD) $(TOP)\tool\mkshellc.tcl > shell.c

zlib:
	pushd $(ZLIBDIR) && $(MAKE) /f win32\Makefile.msc clean $(ZLIBLIB) && popd

# Rules to build the extension objects.
#
icu.lo:	$(TOP)\ext\icu\icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\icu\icu.c

fts2.lo:	$(TOP)\ext\fts2\fts2.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2.c

fts2_hash.lo:	$(TOP)\ext\fts2\fts2_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_hash.c

fts2_icu.lo:	$(TOP)\ext\fts2\fts2_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_icu.c

fts2_porter.lo:	$(TOP)\ext\fts2\fts2_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_porter.c

fts2_tokenizer.lo:	$(TOP)\ext\fts2\fts2_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer.c

fts2_tokenizer1.lo:	$(TOP)\ext\fts2\fts2_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts2\fts2_tokenizer1.c

fts3.lo:	$(TOP)\ext\fts3\fts3.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3.c

fts3_aux.lo:	$(TOP)\ext\fts3\fts3_aux.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_aux.c

fts3_expr.lo:	$(TOP)\ext\fts3\fts3_expr.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_expr.c

fts3_hash.lo:	$(TOP)\ext\fts3\fts3_hash.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_hash.c

fts3_icu.lo:	$(TOP)\ext\fts3\fts3_icu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_icu.c

fts3_snippet.lo:	$(TOP)\ext\fts3\fts3_snippet.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_snippet.c

fts3_porter.lo:	$(TOP)\ext\fts3\fts3_porter.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_porter.c

fts3_tokenizer.lo:	$(TOP)\ext\fts3\fts3_tokenizer.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer.c

fts3_tokenizer1.lo:	$(TOP)\ext\fts3\fts3_tokenizer1.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenizer1.c

fts3_tokenize_vtab.lo:	$(TOP)\ext\fts3\fts3_tokenize_vtab.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_tokenize_vtab.c

fts3_unicode.lo:	$(TOP)\ext\fts3\fts3_unicode.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode.c

fts3_unicode2.lo:	$(TOP)\ext\fts3\fts3_unicode2.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_unicode2.c

fts3_write.lo:	$(TOP)\ext\fts3\fts3_write.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\fts3\fts3_write.c

stmt.lo:	$(TOP)\ext\misc\stmt.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\misc\stmt.c

rtree.lo:	$(TOP)\ext\rtree\rtree.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\rtree\rtree.c

sqlite3session.lo:	$(TOP)\ext\session\sqlite3session.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c $(TOP)\ext\session\sqlite3session.c

# FTS5 things
#
FTS5_SRC = \
   $(TOP)\ext\fts5\fts5.h \
   $(TOP)\ext\fts5\fts5Int.h \
   $(TOP)\ext\fts5\fts5_aux.c \
   $(TOP)\ext\fts5\fts5_buffer.c \
   $(TOP)\ext\fts5\fts5_main.c \
   $(TOP)\ext\fts5\fts5_config.c \
   $(TOP)\ext\fts5\fts5_expr.c \
   $(TOP)\ext\fts5\fts5_hash.c \
   $(TOP)\ext\fts5\fts5_index.c \
   fts5parse.c fts5parse.h \
   $(TOP)\ext\fts5\fts5_storage.c \
   $(TOP)\ext\fts5\fts5_tokenize.c \
   $(TOP)\ext\fts5\fts5_unicode2.c \
   $(TOP)\ext\fts5\fts5_varint.c \
   $(TOP)\ext\fts5\fts5_vocab.c

LSM1_SRC = \
   $(TOP)\ext\lsm1\lsm.h \
   $(TOP)\ext\lsm1\lsmInt.h \
   $(TOP)\ext\lsm1\lsm_ckpt.c \
   $(TOP)\ext\lsm1\lsm_file.c \
   $(TOP)\ext\lsm1\lsm_log.c \
   $(TOP)\ext\lsm1\lsm_main.c \
   $(TOP)\ext\lsm1\lsm_mem.c \
   $(TOP)\ext\lsm1\lsm_mutex.c \
   $(TOP)\ext\lsm1\lsm_shared.c \
   $(TOP)\ext\lsm1\lsm_sorted.c \
   $(TOP)\ext\lsm1\lsm_str.c \
   $(TOP)\ext\lsm1\lsm_tree.c \
   $(TOP)\ext\lsm1\lsm_unix.c \
   $(TOP)\ext\lsm1\lsm_varint.c \
   $(TOP)\ext\lsm1\lsm_vtab.c \
   $(TOP)\ext\lsm1\lsm_win32.c

fts5parse.c:	$(TOP)\ext\fts5\fts5parse.y lemon.exe
	copy /Y $(TOP)\ext\fts5\fts5parse.y .
	copy /B fts5parse.y +,,
	del /Q fts5parse.h 2>NUL
	.\lemon.exe $(REQ_FEATURE_FLAGS) $(OPT_FEATURE_FLAGS) $(EXT_FEATURE_FLAGS) $(OPTS) -S fts5parse.y

fts5parse.h:	fts5parse.c

fts5.c:	$(FTS5_SRC)
	$(TCLSH_CMD) $(TOP)\ext\fts5\tool\mkfts5c.tcl
	copy /Y $(TOP)\ext\fts5\fts5.h .
	copy /B fts5.h +,,

lsm1.c:	$(LSM1_SRC)
	$(TCLSH_CMD) $(TOP)\ext\lsm1\tool\mklsm1c.tcl
	copy /Y $(TOP)\ext\lsm1\lsm.h .
	copy /B lsm.h +,,

fts5.lo:	fts5.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(CORE_COMPILE_OPTS) $(NO_WARN) -DSQLITE_CORE -c fts5.c

fts5_ext.lo:	fts5.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) $(NO_WARN) -c fts5.c

fts5.dll:	fts5_ext.lo
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ fts5_ext.lo

sqlite3rbu.lo:	$(TOP)\ext\rbu\sqlite3rbu.c $(HDR) $(EXTHDR)
	$(LTCOMPILE) -DSQLITE_CORE -c $(TOP)\ext\rbu\sqlite3rbu.c

# Rules to build the 'testfixture' application.
#
# If using the amalgamation, use sqlite3.c directly to build the test
# fixture.  Otherwise link against libsqlite3.lib.  (This distinction is
# necessary because the test fixture requires non-API symbols which are
# hidden when the library is built via the amalgamation).
#
TESTFIXTURE_FLAGS = -DTCLSH_INIT_PROC=sqlite3TestInit -DSQLITE_TEST=1 -DSQLITE_CRASH_TEST=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERVER=1 -DSQLITE_PRIVATE=""
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CORE $(NO_WARN)
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_SERIES_CONSTRAINT_VERIFY=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_DEFAULT_PAGE_SIZE=1024
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_ENABLE_BYTECODE_VTAB=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) -DSQLITE_CKSUMVFS_STATIC=1
TESTFIXTURE_FLAGS = $(TESTFIXTURE_FLAGS) $(TEST_CCONV_OPTS)

TESTFIXTURE_SRC0 = $(TESTEXT) $(TESTSRC2)
TESTFIXTURE_SRC1 = $(TESTEXT) $(SQLITE3C)
!IF $(USE_AMALGAMATION)==0
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC0)
!ELSE
TESTFIXTURE_SRC = $(TESTSRC) $(TOP)\src\tclsqlite.c $(TESTFIXTURE_SRC1)
!ENDIF

!IF $(USE_STDCALL)!=0 || $(FOR_WIN10)!=0
sqlite_tclDecls.h:
	echo #ifndef SQLITE_TCLAPI > $(SQLITETCLDECLSH)
	echo #  define SQLITE_TCLAPI >> $(SQLITETCLDECLSH)
	echo #endif >> $(SQLITETCLDECLSH)
	type "$(TCLINCDIR)\tclDecls.h" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "^(EXTERN(?: CONST\d+?)?\s+?[^\(]*?\s+?)Tcl_" "\1 SQLITE_TCLAPI Tcl_" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "^(EXTERN\s+?(?:void|VOID)\s+?)TclFreeObj" "\1 SQLITE_TCLAPI TclFreeObj" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*tcl_" "(SQLITE_TCLAPI *tcl_" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*tclFreeObj" "(SQLITE_TCLAPI *tclFreeObj" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "\(\*" "(SQLITE_TCLAPI *" >> $(SQLITETCLDECLSH)

sqlite_tcl.h:
	type "$(TCLINCDIR)\tcl.h" | $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact tclDecls.h sqlite_tclDecls.h \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl regsub "typedef (.*?)\(Tcl_" "typedef \1 (SQLITE_TCLAPI Tcl_" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "void (*freeProc)" "void (SQLITE_TCLAPI *freeProc)" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "Tcl_HashEntry *(*findProc)" "Tcl_HashEntry *(SQLITE_TCLAPI *findProc)" \
		| $(TCLSH_CMD) $(TOP)\tool\replace.tcl exact "Tcl_HashEntry *(*createProc)" "Tcl_HashEntry *(SQLITE_TCLAPI *createProc)" >> $(SQLITETCLH)
!ENDIF

testfixture.exe:	$(TESTFIXTURE_SRC) $(TESTFIXTURE_DEP) $(SQLITE3H) $(LIBRESOBJS) $(HDR) $(SQLITE_TCL_DEP)
	$(LTLINK) -DSQLITE_NO_SYNC=1 $(TESTFIXTURE_FLAGS) \
		-DBUILD_sqlite -I$(TCLINCDIR) \
		$(TESTFIXTURE_SRC) \
		/link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS)

extensiontest:	testfixture.exe testloadext.dll
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\loadext.test $(TESTOPTS)

coretestprogs:	$(TESTPROGS)

testprogs:	coretestprogs srcck1.exe fuzzcheck.exe sessionfuzz.exe

fulltest:	alltest fuzztest

alltest:	$(TESTPROGS)
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\all.test $(TESTOPTS)

soaktest:	$(TESTPROGS)
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\all.test -soak=1 $(TESTOPTS)

fulltestonly:	$(TESTPROGS) fuzztest
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\full.test

queryplantest:	testfixture.exe shell
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\permutations.test queryplanner $(TESTOPTS)

fuzztest:	fuzzcheck.exe
	.\fuzzcheck.exe $(FUZZDATA)

# Minimal testing that runs in less than 3 minutes (on a fast machine)
#
quicktest:	testfixture.exe sourcetest
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\extraquick.test $(TESTOPTS)

# This is the common case.  Run many tests that do not take too long,
# including fuzzcheck, sqlite3_analyzer, and sqldiff tests.
#
test:	$(TESTPROGS) sourcetest fuzztest tcltest

# The veryquick.test TCL tests.
#
tcltest: testfixture.exe
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\veryquick.test $(TESTOPTS)

# Runs all the same tests cases as the "tcltest" target but uses
# the testrunner.tcl script to run them in multiple cores
# concurrently.
testrunner:	testfixture.exe
	.\testfixture.exe $(TOP)\test\testrunner.tcl

smoketest:	$(TESTPROGS)
	@set PATH=$(LIBTCLPATH);$(PATH)
	.\testfixture.exe $(TOP)\test\main.test $(TESTOPTS)

shelltest: $(TESTPROGS)
	.\testfixture.exe $(TOP)\test\permutations.test shell

sqlite3_analyzer.c:	$(SQLITE3C) $(SQLITE3H) $(TOP)\src\tclsqlite.c $(TOP)\tool\spaceanal.tcl $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqlite3_analyzer.c.in $(SQLITE_TCL_DEP)
	$(TCLSH_CMD) $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqlite3_analyzer.c.in > $@

sqlite3_analyzer.exe:	sqlite3_analyzer.c $(LIBRESOBJS)
	$(LTLINK) $(NO_WARN) -DBUILD_sqlite -I$(TCLINCDIR) sqlite3_analyzer.c \
		/link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS)

sqltclsh.c: sqlite3.c $(TOP)\src\tclsqlite.c $(TOP)\tool\sqltclsh.tcl $(TOP)\ext\misc\appendvfs.c $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqltclsh.c.in
	$(TCLSH_CMD) $(TOP)\tool\mkccode.tcl $(TOP)\tool\sqltclsh.c.in >sqltclsh.c

sqltclsh.exe: sqltclsh.c  $(SHELL_CORE_DEP) $(LIBRESOBJS)
	$(LTLINK) $(NO_WARN) -DBUILD_sqlite -I$(TCLINCDIR) sqltclsh.c \
		/link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS)

sqlite3_expert.exe: $(SQLITE3C) $(TOP)\ext\expert\sqlite3expert.h $(TOP)\ext\expert\sqlite3expert.c $(TOP)\ext\expert\expert.c
	$(LTLINK) $(NO_WARN)	$(TOP)\ext\expert\sqlite3expert.c $(TOP)\ext\expert\expert.c $(SQLITE3C) $(TLIBS)

CHECKER_DEPS =\
  $(TOP)/tool/mkccode.tcl \
  sqlite3.c \
  $(TOP)/src/tclsqlite.c \
  $(TOP)/ext/repair/sqlite3_checker.tcl \
  $(TOP)/ext/repair/checkindex.c \
  $(TOP)/ext/repair/checkfreelist.c \
  $(TOP)/ext/misc/btreeinfo.c \
  $(TOP)/ext/repair/sqlite3_checker.c.in

sqlite3_checker.c:	$(CHECKER_DEPS)
	$(TCLSH_CMD) $(TOP)\tool\mkccode.tcl $(TOP)\ext\repair\sqlite3_checker.c.in > $@

sqlite3_checker.exe:	sqlite3_checker.c $(LIBRESOBJS)
	$(LTLINK) $(NO_WARN) -DBUILD_sqlite -I$(TCLINCDIR) sqlite3_checker.c \
		/link $(LDFLAGS) $(LTLINKOPTS) $(TCLLIBPATHS) $(LTLIBPATHS) $(LIBRESOBJS) $(TCLLIBS) $(LTLIBS) $(TLIBS)

dbdump.exe:	$(TOP)\ext\misc\dbdump.c $(SQLITE3C) $(SQLITE3H) $(LIBRESOBJS)
	$(LTLINK) $(NO_WARN) -DDBDUMP_STANDALONE $(TOP)\ext\misc\dbdump.c $(SQLITE3C) \
		/link $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LTLIBS)

testloadext.lo:	$(TOP)\src\test_loadext.c $(SQLITE3H)
	$(LTCOMPILE) $(NO_WARN) -c $(TOP)\src\test_loadext.c

testloadext.dll:	testloadext.lo
	$(LD) $(LDFLAGS) $(LTLINKOPTS) $(LTLIBPATHS) /DLL /OUT:$@ testloadext.lo

dbtotxt.exe:	$(TOP)\tool\dbtotxt.c
	$(LTLINK) $(NO_WARN)	$(TOP)\tool\dbtotxt.c /link $(LDFLAGS) $(LTLINKOPTS)

showdb.exe:	$(TOP)\tool\showdb.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\showdb.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

showstat4.exe:	$(TOP)\tool\showstat4.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\showstat4.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

showjournal.exe:	$(TOP)\tool\showjournal.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\showjournal.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

showwal.exe:	$(TOP)\tool\showwal.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\showwal.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

showshm.exe:	$(TOP)\tool\showshm.c
	$(LTLINK) $(NO_WARN)	$(TOP)\tool\showshm.c /link $(LDFLAGS) $(LTLINKOPTS)

index_usage.exe: $(TOP)\tool\index_usage.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\index_usage.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

changeset.exe:	$(TOP)\ext\session\changeset.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		-DSQLITE_ENABLE_SESSION=1 -DSQLITE_ENABLE_PREUPDATE_HOOK=1 \
		$(TOP)\ext\session\changeset.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

changesetfuzz.exe:	$(TOP)\ext\session\changesetfuzz.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		-DSQLITE_ENABLE_SESSION=1 -DSQLITE_ENABLE_PREUPDATE_HOOK=1 \
		$(TOP)\ext\session\changesetfuzz.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

fts3view.exe:	$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\ext\fts3\tool\fts3view.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

rollback-test.exe:	$(TOP)\tool\rollback-test.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\tool\rollback-test.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

atrc.exe:	$(TOP)\test\atrc.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\test\atrc.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

LogEst.exe:	$(TOP)\tool\logest.c $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(TOP)\tool\LogEst.c /link $(LDFLAGS) $(LTLINKOPTS)

wordcount.exe:	$(TOP)\test\wordcount.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_THREADSAFE=0 -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\test\wordcount.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

speedtest1.exe:	$(TOP)\test\speedtest1.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(ST_COMPILE_OPTS) -DSQLITE_OMIT_LOAD_EXTENSION \
		$(TOP)\test\speedtest1.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

kvtest.exe:	$(TOP)\test\kvtest.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(KV_COMPILE_OPTS) \
		$(TOP)\test\kvtest.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

rbu.exe:	$(TOP)\ext\rbu\rbu.c $(TOP)\ext\rbu\sqlite3rbu.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) -DSQLITE_ENABLE_RBU \
		$(TOP)\ext\rbu\rbu.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

THREADTEST3_SRC = \
  $(TOP)\test\threadtest3.c \
  $(TOP)\test\tt3_checkpoint.c \
  $(TOP)\test\tt3_index.c \
  $(TOP)\test\tt3_vacuum.c \
  $(TOP)\test\tt3_stress.c \
  $(TOP)\test\tt3_lookaside1.c

threadtest3.exe: $(THREADTEST3_SRC) $(TOP)\src\test_multiplex.c $(SQLITE3C) $(SQLITE3H)
	$(LTLINK) $(NO_WARN) $(TOP)\test\threadtest3.c $(TOP)\src\test_multiplex.c $(SQLITE3C) /link $(LDFLAGS) $(LTLINKOPTS)

LSMDIR=$(TOP)\ext\lsm1
!INCLUDE $(LSMDIR)\Makefile.msc

moreclean:	clean
	del /Q $(SQLITE3C) $(SQLITE3H) 2>NUL
# <</mark>>

clean:
	del /Q *.exp *.lo *.ilk *.lib *.obj *.ncb *.pdb *.sdf *.suo 2>NUL
	del /Q *.bsc *.def *.cod *.da *.bb *.bbg *.vc gmon.out 2>NUL
	del /Q $(SQLITE3EXE) $(SQLITE3DLL) Replace.exe 2>NUL
# <<mark>>
	del /Q $(SQLITE3TCLDLL) pkgIndex.tcl 2>NUL
	del /Q opcodes.c opcodes.h 2>NUL
	del /Q lemon.* lempar.c parse.* 2>NUL
	del /Q mksourceid.* mkkeywordhash.* keywordhash.h 2>NUL
	del /Q notasharedlib.* 2>NUL
	-rmdir /Q/S .deps 2>NUL
	-rmdir /Q/S .libs 2>NUL
	-rmdir /Q/S tsrc 2>NUL
	del /Q .target_source 2>NUL
	del /Q tclsqlite3.exe $(SQLITETCLH) $(SQLITETCLDECLSH) 2>NUL
	del /Q lsm.dll lsmtest.exe 2>NUL
	del /Q atrc.exe changesetfuzz.exe dbtotxt.exe index_usage.exe 2>NUL
	del /Q testloadext.dll 2>NUL
	del /Q testfixture.exe test.db 2>NUL
	del /Q LogEst.exe fts3view.exe rollback-test.exe showdb.exe dbdump.exe 2>NUL
	del /Q changeset.exe 2>NUL
	del /Q showjournal.exe showstat4.exe showwal.exe speedtest1.exe 2>NUL
	del /Q mptester.exe wordcount.exe rbu.exe srcck1.exe 2>NUL
	del /Q sqlite3.c sqlite3-*.c sqlite3.h 2>NUL
	del /Q sqlite3rc.h 2>NUL
	del /Q shell.c sqlite3ext.h sqlite3session.h 2>NUL
	del /Q sqlite3_analyzer.exe sqlite3_analyzer.c 2>NUL
	del /Q sqlite-*-output.vsix 2>NUL
	del /Q fuzzershell.exe fuzzcheck.exe sqldiff.exe dbhash.exe 2>NUL
	del /Q sqltclsh.* 2>NUL
	del /Q dbfuzz.exe sessionfuzz.exe threadtest3.exe 2>NUL
	del /Q kvtest.exe ossshell.exe scrub.exe 2>NUL
	del /Q showshm.exe sqlite3_checker.* sqlite3_expert.exe 2>NUL
	del /Q fts5.* fts5parse.* 2>NUL
	del /Q lsm.h lsm1.c 2>NUL
# <</mark>>