test/indexedby.test

# 2008 October 4
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#
# $Id: indexedby.test,v 1.5 2009/03/22 20:36:19 drh Exp $

set testdir [file dirname $argv0]
source $testdir/tester.tcl

# Create a schema with some indexes.
#
do_test indexedby-1.1 {
  execsql {
    CREATE TABLE t1(a, b);
    CREATE INDEX i1 ON t1(a);
    CREATE INDEX i2 ON t1(b);

    CREATE TABLE t2(c, d);
    CREATE INDEX i3 ON t2(c);
    CREATE INDEX i4 ON t2(d);

    CREATE TABLE t3(e PRIMARY KEY, f);

    CREATE VIEW v1 AS SELECT * FROM t1;
  }
} {}

# Explain Query Plan
#
proc EQP {sql} {
  uplevel "execsql {EXPLAIN QUERY PLAN $sql}"
}

# These tests are to check that "EXPLAIN QUERY PLAN" is working as expected.
#
do_execsql_test indexedby-1.2 {
  EXPLAIN QUERY PLAN select * from t1 WHERE a = 10; 
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a=?) (~10 rows)}}
do_execsql_test indexedby-1.3 {
  EXPLAIN QUERY PLAN select * from t1 ; 
} {0 0 0 {SCAN TABLE t1 (~1000000 rows)}}
do_execsql_test indexedby-1.4 {
  EXPLAIN QUERY PLAN select * from t1, t2 WHERE c = 10; 
} {
  0 0 1 {SEARCH TABLE t2 USING INDEX i3 (c=?) (~10 rows)} 
  0 1 0 {SCAN TABLE t1 (~1000000 rows)}
}

# Parser tests. Test that an INDEXED BY or NOT INDEX clause can be 
# attached to a table in the FROM clause, but not to a sub-select or
# SQL view. Also test that specifying an index that does not exist or
# is attached to a different table is detected as an error.
# 
do_test indexedby-2.1 {
  execsql { SELECT * FROM t1 NOT INDEXED WHERE a = 'one' AND b = 'two'}
} {}
do_test indexedby-2.2 {
  execsql { SELECT * FROM t1 INDEXED BY i1 WHERE a = 'one' AND b = 'two'}
} {}
do_test indexedby-2.3 {
  execsql { SELECT * FROM t1 INDEXED BY i2 WHERE a = 'one' AND b = 'two'}
} {}

do_test indexedby-2.4 {
  catchsql { SELECT * FROM t1 INDEXED BY i3 WHERE a = 'one' AND b = 'two'}
} {1 {no such index: i3}}
do_test indexedby-2.5 {
  catchsql { SELECT * FROM t1 INDEXED BY i5 WHERE a = 'one' AND b = 'two'}
} {1 {no such index: i5}}
do_test indexedby-2.6 {
  catchsql { SELECT * FROM t1 INDEXED BY WHERE a = 'one' AND b = 'two'}
} {1 {near "WHERE": syntax error}}
do_test indexedby-2.7 {
  catchsql { SELECT * FROM v1 INDEXED BY i1 WHERE a = 'one' }
} {1 {no such index: i1}}

# Tests for single table cases.
#
do_execsql_test indexedby-3.1 {
  EXPLAIN QUERY PLAN SELECT * FROM t1 NOT INDEXED WHERE a = 'one' AND b = 'two'
} {0 0 0 {SCAN TABLE t1 (~10000 rows)}}
do_execsql_test indexedby-3.2 {
  EXPLAIN QUERY PLAN 
  SELECT * FROM t1 INDEXED BY i1 WHERE a = 'one' AND b = 'two'
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a=?) (~2 rows)}}
do_execsql_test indexedby-3.3 {
  EXPLAIN QUERY PLAN 
  SELECT * FROM t1 INDEXED BY i2 WHERE a = 'one' AND b = 'two'
} {0 0 0 {SEARCH TABLE t1 USING INDEX i2 (b=?) (~2 rows)}}
do_test indexedby-3.4 {
  catchsql { SELECT * FROM t1 INDEXED BY i2 WHERE a = 'one' }
} {1 {cannot use index: i2}}
do_test indexedby-3.5 {
  catchsql { SELECT * FROM t1 INDEXED BY i2 ORDER BY a }
} {1 {cannot use index: i2}}
do_test indexedby-3.6 {
  catchsql { SELECT * FROM t1 INDEXED BY i1 WHERE a = 'one' }
} {0 {}}
do_test indexedby-3.7 {
  catchsql { SELECT * FROM t1 INDEXED BY i1 ORDER BY a }
} {0 {}}

do_execsql_test indexedby-3.8 {
  EXPLAIN QUERY PLAN 
  SELECT * FROM t3 INDEXED BY sqlite_autoindex_t3_1 ORDER BY e 
} {0 0 0 {SCAN TABLE t3 USING INDEX sqlite_autoindex_t3_1 (~1000000 rows)}}
do_execsql_test indexedby-3.9 {
  EXPLAIN QUERY PLAN 
  SELECT * FROM t3 INDEXED BY sqlite_autoindex_t3_1 WHERE e = 10 
} {0 0 0 {SEARCH TABLE t3 USING INDEX sqlite_autoindex_t3_1 (e=?) (~1 rows)}}
do_test indexedby-3.10 {
  catchsql { SELECT * FROM t3 INDEXED BY sqlite_autoindex_t3_1 WHERE f = 10 }
} {1 {cannot use index: sqlite_autoindex_t3_1}}
do_test indexedby-3.11 {
  catchsql { SELECT * FROM t3 INDEXED BY sqlite_autoindex_t3_2 WHERE f = 10 }
} {1 {no such index: sqlite_autoindex_t3_2}}

# Tests for multiple table cases.
#
do_execsql_test indexedby-4.1 {
  EXPLAIN QUERY PLAN SELECT * FROM t1, t2 WHERE a = c 
} {
  0 0 0 {SCAN TABLE t1 (~1000000 rows)} 
  0 1 1 {SEARCH TABLE t2 USING INDEX i3 (c=?) (~10 rows)}
}
do_execsql_test indexedby-4.2 {
  EXPLAIN QUERY PLAN SELECT * FROM t1 INDEXED BY i1, t2 WHERE a = c 
} {
  0 0 1 {SCAN TABLE t2 (~1000000 rows)} 
  0 1 0 {SEARCH TABLE t1 USING INDEX i1 (a=?) (~10 rows)}
}
do_test indexedby-4.3 {
  catchsql {
    SELECT * FROM t1 INDEXED BY i1, t2 INDEXED BY i3 WHERE a=c
  }
} {1 {cannot use index: i1}}
do_test indexedby-4.4 {
  catchsql {
    SELECT * FROM t2 INDEXED BY i3, t1 INDEXED BY i1 WHERE a=c
  }
} {1 {cannot use index: i3}}

# Test embedding an INDEXED BY in a CREATE VIEW statement. This block
# also tests that nothing bad happens if an index refered to by
# a CREATE VIEW statement is dropped and recreated.
#
do_execsql_test indexedby-5.1 {
  CREATE VIEW v2 AS SELECT * FROM t1 INDEXED BY i1 WHERE a > 5;
  EXPLAIN QUERY PLAN SELECT * FROM v2 
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a>?) (~250000 rows)}}
do_execsql_test indexedby-5.2 {
  EXPLAIN QUERY PLAN SELECT * FROM v2 WHERE b = 10 
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a>?) (~25000 rows)}}
do_test indexedby-5.3 {
  execsql { DROP INDEX i1 }
  catchsql { SELECT * FROM v2 }
} {1 {no such index: i1}}
do_test indexedby-5.4 {
  # Recreate index i1 in such a way as it cannot be used by the view query.
  execsql { CREATE INDEX i1 ON t1(b) }
  catchsql { SELECT * FROM v2 }
} {1 {cannot use index: i1}}
do_test indexedby-5.5 {
  # Drop and recreate index i1 again. This time, create it so that it can
  # be used by the query.
  execsql { DROP INDEX i1 ; CREATE INDEX i1 ON t1(a) }
  catchsql { SELECT * FROM v2 }
} {0 {}}

# Test that "NOT INDEXED" may use the rowid index, but not others.
# 
do_execsql_test indexedby-6.1 {
  EXPLAIN QUERY PLAN SELECT * FROM t1 WHERE b = 10 ORDER BY rowid 
} {0 0 0 {SEARCH TABLE t1 USING INDEX i2 (b=?) (~10 rows)}}
do_execsql_test indexedby-6.2 {
  EXPLAIN QUERY PLAN SELECT * FROM t1 NOT INDEXED WHERE b = 10 ORDER BY rowid 
} {0 0 0 {SCAN TABLE t1 USING INTEGER PRIMARY KEY (~100000 rows)}}

# Test that "INDEXED BY" can be used in a DELETE statement.
# 
do_execsql_test indexedby-7.1 {
  EXPLAIN QUERY PLAN DELETE FROM t1 WHERE a = 5 
} {0 0 0 {SEARCH TABLE t1 USING COVERING INDEX i1 (a=?) (~10 rows)}}
do_execsql_test indexedby-7.2 {
  EXPLAIN QUERY PLAN DELETE FROM t1 NOT INDEXED WHERE a = 5 
} {0 0 0 {SCAN TABLE t1 (~100000 rows)}}
do_execsql_test indexedby-7.3 {
  EXPLAIN QUERY PLAN DELETE FROM t1 INDEXED BY i1 WHERE a = 5 
} {0 0 0 {SEARCH TABLE t1 USING COVERING INDEX i1 (a=?) (~10 rows)}}
do_execsql_test indexedby-7.4 {
  EXPLAIN QUERY PLAN DELETE FROM t1 INDEXED BY i1 WHERE a = 5 AND b = 10
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a=?) (~2 rows)}}
do_execsql_test indexedby-7.5 {
  EXPLAIN QUERY PLAN DELETE FROM t1 INDEXED BY i2 WHERE a = 5 AND b = 10
} {0 0 0 {SEARCH TABLE t1 USING INDEX i2 (b=?) (~2 rows)}}
do_test indexedby-7.6 {
  catchsql { DELETE FROM t1 INDEXED BY i2 WHERE a = 5}
} {1 {cannot use index: i2}}

# Test that "INDEXED BY" can be used in an UPDATE statement.
# 
do_execsql_test indexedby-8.1 {
  EXPLAIN QUERY PLAN UPDATE t1 SET rowid=rowid+1 WHERE a = 5 
} {0 0 0 {SEARCH TABLE t1 USING COVERING INDEX i1 (a=?) (~10 rows)}}
do_execsql_test indexedby-8.2 {
  EXPLAIN QUERY PLAN UPDATE t1 NOT INDEXED SET rowid=rowid+1 WHERE a = 5 
} {0 0 0 {SCAN TABLE t1 (~100000 rows)}}
do_execsql_test indexedby-8.3 {
  EXPLAIN QUERY PLAN UPDATE t1 INDEXED BY i1 SET rowid=rowid+1 WHERE a = 5 
} {0 0 0 {SEARCH TABLE t1 USING COVERING INDEX i1 (a=?) (~10 rows)}}
do_execsql_test indexedby-8.4 {
  EXPLAIN QUERY PLAN 
  UPDATE t1 INDEXED BY i1 SET rowid=rowid+1 WHERE a = 5 AND b = 10
} {0 0 0 {SEARCH TABLE t1 USING INDEX i1 (a=?) (~2 rows)}}
do_execsql_test indexedby-8.5 {
  EXPLAIN QUERY PLAN 
  UPDATE t1 INDEXED BY i2 SET rowid=rowid+1 WHERE a = 5 AND b = 10
} {0 0 0 {SEARCH TABLE t1 USING INDEX i2 (b=?) (~2 rows)}}
do_test indexedby-8.6 {
  catchsql { UPDATE t1 INDEXED BY i2 SET rowid=rowid+1 WHERE a = 5}
} {1 {cannot use index: i2}}

# Test that bug #3560 is fixed.
#
do_test indexedby-9.1 {
  execsql {
    CREATE TABLE maintable( id integer);
    CREATE TABLE joinme(id_int integer, id_text text);
    CREATE INDEX joinme_id_text_idx on joinme(id_text);
    CREATE INDEX joinme_id_int_idx on joinme(id_int);
  }
} {}
do_test indexedby-9.2 {
  catchsql {
    select * from maintable as m inner join
    joinme as j indexed by joinme_id_text_idx
    on ( m.id  = j.id_int)
  }
} {1 {cannot use index: joinme_id_text_idx}}
do_test indexedby-9.3 {
  catchsql { select * from maintable, joinme INDEXED by joinme_id_text_idx }
} {1 {cannot use index: joinme_id_text_idx}}

# Make sure we can still create tables, indices, and columns whose name
# is "indexed".
#
do_test indexedby-10.1 {
  execsql {
    CREATE TABLE indexed(x,y);
    INSERT INTO indexed VALUES(1,2);
    SELECT * FROM indexed;
  }
} {1 2}
do_test indexedby-10.2 {
  execsql {
    CREATE INDEX i10 ON indexed(x);
    SELECT * FROM indexed indexed by i10 where x>0;
  }
} {1 2}
do_test indexedby-10.3 {
  execsql {
    DROP TABLE indexed;
    CREATE TABLE t10(indexed INTEGER);
    INSERT INTO t10 VALUES(1);
    CREATE INDEX indexed ON t10(indexed);
    SELECT * FROM t10 indexed by indexed WHERE indexed>0
  }
} {1}

finish_test