test/pagerfault.test

# 2010 June 15
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#***********************************************************************
#

set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/lock_common.tcl
source $testdir/malloc_common.tcl

set a_string_counter 1
proc a_string {n} {
  global a_string_counter
  incr a_string_counter
  string range [string repeat "${a_string_counter}." $n] 1 $n
}
db func a_string a_string

if 1 {

#-------------------------------------------------------------------------
# Test fault-injection while rolling back a hot-journal file.
#
do_test pagerfault-1-pre1 {
  execsql {
    PRAGMA journal_mode = DELETE;
    PRAGMA cache_size = 10;
    CREATE TABLE t1(a UNIQUE, b UNIQUE);
    INSERT INTO t1 VALUES(a_string(200), a_string(300));
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
    BEGIN;
      INSERT INTO t1 SELECT a_string(201), a_string(301) FROM t1;
      INSERT INTO t1 SELECT a_string(202), a_string(302) FROM t1;
      INSERT INTO t1 SELECT a_string(203), a_string(303) FROM t1;
      INSERT INTO t1 SELECT a_string(204), a_string(304) FROM t1;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-1 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { SELECT count(*) FROM t1 }
} -test {
  faultsim_test_result {0 4}
  faultsim_integrity_check
  if {[db one { SELECT count(*) FROM t1 }] != 4} {
    error "Database content appears incorrect"
  }
}

#-------------------------------------------------------------------------
# Test fault-injection while rolling back a hot-journal file with a 
# page-size different from the current value stored on page 1 of the
# database file.
#
do_test pagerfault-2-pre1 {
  testvfs tv -default 1
  tv filter xSync
  tv script xSyncCb
  proc xSyncCb {filename args} {
    if {[string match *journal filename]==0} faultsim_save
  }
  faultsim_delete_and_reopen
  execsql {
    PRAGMA page_size = 4096;
    BEGIN;
      CREATE TABLE abc(a, b, c);
      INSERT INTO abc VALUES('o', 't', 't'); 
      INSERT INTO abc VALUES('f', 'f', 's'); 
      INSERT INTO abc SELECT * FROM abc; -- 4
      INSERT INTO abc SELECT * FROM abc; -- 8
      INSERT INTO abc SELECT * FROM abc; -- 16
      INSERT INTO abc SELECT * FROM abc; -- 32
      INSERT INTO abc SELECT * FROM abc; -- 64
      INSERT INTO abc SELECT * FROM abc; -- 128
      INSERT INTO abc SELECT * FROM abc; -- 256
    COMMIT;
    PRAGMA page_size = 1024;
    VACUUM;
  }
  db close
  tv delete
} {}
do_faultsim_test pagerfault-2 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { SELECT * FROM abc }
} -test {
  set answer [split [string repeat "ottffs" 128] ""]
  faultsim_test_result [list 0 $answer]
  faultsim_integrity_check
  set res [db eval { SELECT * FROM abc }]
  if {$res != $answer} { error "Database content appears incorrect ($res)" }
} 

#-------------------------------------------------------------------------
# Test fault-injection while rolling back hot-journals that were created
# as part of a multi-file transaction.
#
do_test pagerfault-3-pre1 {
  testvfs tstvfs -default 1
  tstvfs filter xDelete
  tstvfs script xDeleteCallback

  proc xDeleteCallback {method file args} {
    set file [file tail $file]
    if { [string match *mj* $file] } { faultsim_save }
  }

  faultsim_delete_and_reopen
  db func a_string a_string

  execsql {
    ATTACH 'test.db2' AS aux;
    PRAGMA journal_mode = DELETE;
    PRAGMA main.cache_size = 10;
    PRAGMA aux.cache_size = 10;

    CREATE TABLE t1(a UNIQUE, b UNIQUE);
    CREATE TABLE aux.t2(a UNIQUE, b UNIQUE);
    INSERT INTO t1 VALUES(a_string(200), a_string(300));
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
    INSERT INTO t2 SELECT * FROM t1;

    BEGIN;
      INSERT INTO t1 SELECT a_string(201), a_string(301) FROM t1;
      INSERT INTO t1 SELECT a_string(202), a_string(302) FROM t1;
      INSERT INTO t1 SELECT a_string(203), a_string(303) FROM t1;
      INSERT INTO t1 SELECT a_string(204), a_string(304) FROM t1;
      REPLACE INTO t2 SELECT * FROM t1;
    COMMIT;
  }

  db close
  tstvfs delete
} {}
do_faultsim_test pagerfault-3 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { 
    ATTACH 'test.db2' AS aux;
    SELECT count(*) FROM t2;
    SELECT count(*) FROM t1;
  }
} -test {
  faultsim_test_result {0 {4 4}} {1 {unable to open database: test.db2}}
  faultsim_integrity_check
  catchsql { ATTACH 'test.db2' AS aux }
  if {[db one { SELECT count(*) FROM t1 }] != 4
   || [db one { SELECT count(*) FROM t2 }] != 4
  } {
    error "Database content appears incorrect"
  }
}

#-------------------------------------------------------------------------
# Test fault-injection as part of a vanilla, no-transaction, INSERT
# statement.
#
do_faultsim_test pagerfault-4 -prep {
  faultsim_delete_and_reopen
} -body {
  execsql { 
    CREATE TABLE x(y);
    INSERT INTO x VALUES('z');
    SELECT * FROM x;
  }
} -test {
  faultsim_test_result {0 z}
  faultsim_integrity_check
}

#-------------------------------------------------------------------------
# Test fault-injection as part of a commit when using journal_mode=PERSIST.
# Three different cases:
#
#    pagerfault-5.1: With no journal_size_limit configured.
#    pagerfault-5.2: With a journal_size_limit configured.
#    pagerfault-5.4: Multi-file transaction. One connection has a 
#                    journal_size_limit of 0, the other has no limit.
#
do_test pagerfault-5-pre1 {
  faultsim_delete_and_reopen
  db func a_string a_string
  execsql {
    CREATE TABLE t1(a UNIQUE, b UNIQUE);
    INSERT INTO t1 VALUES(a_string(200), a_string(300));
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
    INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-5.1 -prep {
  faultsim_restore_and_reopen
  db func a_string a_string
  execsql { PRAGMA journal_mode = PERSIST }
} -body {
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}
do_faultsim_test pagerfault-5.2 -prep {
  faultsim_restore_and_reopen
  db func a_string a_string
  execsql { 
    PRAGMA journal_mode = PERSIST;
    PRAGMA journal_size_limit = 2048;
  }
} -body {
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}
do_faultsim_test pagerfault-5.3 -faults oom-transient -prep {
  faultsim_restore_and_reopen
  db func a_string a_string
  file delete -force test2.db test2.db-journal test2.db-wal
  execsql { 
    PRAGMA journal_mode = PERSIST;
    ATTACH 'test2.db' AS aux;
    PRAGMA aux.journal_mode = PERSIST;
    PRAGMA aux.journal_size_limit = 0;
  }
} -body {
  execsql {
    BEGIN;
      INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1;
      CREATE TABLE aux.t2 AS SELECT * FROM t1;
    COMMIT;
  }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check

  set res ""
  set rc [catch { set res [db one { PRAGMA aux.integrity_check }] }]
  if {$rc!=0 || $res != "ok"} {error "integrity-check problem:$rc $res"}
}

#-------------------------------------------------------------------------
# Test fault-injection as part of a commit when using 
# journal_mode=TRUNCATE.
#
do_test pagerfault-6-pre1 {
  faultsim_delete_and_reopen
  db func a_string a_string
  execsql {
    CREATE TABLE t1(a UNIQUE, b UNIQUE);
    INSERT INTO t1 VALUES(a_string(200), a_string(300));
  }
  faultsim_save_and_close
} {}

do_faultsim_test pagerfault-6.1 -prep {
  faultsim_restore_and_reopen
  db func a_string a_string
  execsql { PRAGMA journal_mode = TRUNCATE }
} -body {
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}

# The unix vfs xAccess() method considers a file zero bytes in size to
# "not exist". This proc overrides that behaviour so that a zero length
# file is considered to exist.
#
proc xAccess {method filename op args} {
  if {$op != "SQLITE_ACCESS_EXISTS"} { return "" }
  return [file exists $filename]
}
do_faultsim_test pagerfault-6.2 -faults cantopen-* -prep {
  shmfault filter xAccess
  shmfault script xAccess

  faultsim_restore_and_reopen
  db func a_string a_string
  execsql { PRAGMA journal_mode = TRUNCATE }
} -body {
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
  execsql { INSERT INTO t1 SELECT a_string(200), a_string(300) FROM t1 }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}

# The following was an attempt to get a bitvec malloc to fail. Didn't work.
#
# do_test pagerfault-6-pre1 {
#   faultsim_delete_and_reopen
#   execsql {
#     CREATE TABLE t1(x, y, UNIQUE(x, y));
#     INSERT INTO t1 VALUES(1, randomblob(1501));
#     INSERT INTO t1 VALUES(2, randomblob(1502));
#     INSERT INTO t1 VALUES(3, randomblob(1503));
#     INSERT INTO t1 VALUES(4, randomblob(1504));
#     INSERT INTO t1 
#       SELECT x, randomblob(1500+oid+(SELECT max(oid) FROM t1)) FROM t1;
#     INSERT INTO t1 
#       SELECT x, randomblob(1500+oid+(SELECT max(oid) FROM t1)) FROM t1;
#     INSERT INTO t1 
#       SELECT x, randomblob(1500+oid+(SELECT max(oid) FROM t1)) FROM t1;
#     INSERT INTO t1 
#       SELECT x, randomblob(1500+oid+(SELECT max(oid) FROM t1)) FROM t1;
#   }
#   faultsim_save_and_close
# } {}
# do_faultsim_test pagerfault-6 -prep {
#   faultsim_restore_and_reopen
# } -body {
#   execsql { 
#     BEGIN;
#       UPDATE t1 SET x=x+4 WHERE x=1;
#       SAVEPOINT one;
#         UPDATE t1 SET x=x+4 WHERE x=2;
#         SAVEPOINT three;
#           UPDATE t1 SET x=x+4 WHERE x=3;
#           SAVEPOINT four;
#             UPDATE t1 SET x=x+4 WHERE x=4;
#         RELEASE three;
#     COMMIT;
#     SELECT DISTINCT x FROM t1;
#   }
# } -test {
#   faultsim_test_result {0 {5 6 7 8}}
#   faultsim_integrity_check
# }
#

# This is designed to provoke a special case in the pager code:
#
# If an error (specifically, a FULL or IOERR error) occurs while writing a
# dirty page to the file-system in order to free up memory, the pager enters
# the "error state". An IO error causes SQLite to roll back the current
# transaction (exiting the error state). A FULL error, however, may only
# rollback the current statement.
#
# This block tests that nothing goes wrong if a FULL error occurs while
# writing a dirty page out to free memory from within a statement that has
# opened a statement transaction.
#
do_test pagerfault-7-pre1 {
  faultsim_delete_and_reopen
  execsql {
    CREATE TABLE t2(a INTEGER PRIMARY KEY, b);
    BEGIN;
      INSERT INTO t2 VALUES(NULL, randomblob(1500));
      INSERT INTO t2 VALUES(NULL, randomblob(1500));
      INSERT INTO t2 SELECT NULL, randomblob(1500) FROM t2;    --  4
      INSERT INTO t2 SELECT NULL, randomblob(1500) FROM t2;    --  8
      INSERT INTO t2 SELECT NULL, randomblob(1500) FROM t2;    -- 16
      INSERT INTO t2 SELECT NULL, randomblob(1500) FROM t2;    -- 32
      INSERT INTO t2 SELECT NULL, randomblob(1500) FROM t2;    -- 64
    COMMIT;
    CREATE TABLE t1(a PRIMARY KEY, b);
    INSERT INTO t1 SELECT * FROM t2;
    DROP TABLE t2;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-7 -prep {
  faultsim_restore_and_reopen
  execsql { 
    PRAGMA cache_size = 10;
    BEGIN;
      UPDATE t1 SET b = randomblob(1500);
  }
} -body {
  execsql { UPDATE t1 SET a = 65, b = randomblob(1500) WHERE (a+1)>200 }
  execsql COMMIT
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}

do_test pagerfault-8-pre1 {
  faultsim_delete_and_reopen
  execsql {
    PRAGMA auto_vacuum = 1;
    CREATE TABLE t1(a INTEGER PRIMARY KEY, b);
    BEGIN;
      INSERT INTO t1 VALUES(NULL, randomblob(1500));
      INSERT INTO t1 VALUES(NULL, randomblob(1500));
      INSERT INTO t1 SELECT NULL, randomblob(1500) FROM t1;    --  4
      INSERT INTO t1 SELECT NULL, randomblob(1500) FROM t1;    --  8
      INSERT INTO t1 SELECT NULL, randomblob(1500) FROM t1;    -- 16
      INSERT INTO t1 SELECT NULL, randomblob(1500) FROM t1;    -- 32
      INSERT INTO t1 SELECT NULL, randomblob(1500) FROM t1;    -- 64
    COMMIT;
  }
  faultsim_save_and_close
  set filesize [file size test.db]
  set {} {}
} {}
do_test pagerfault-8-pre2 {
  faultsim_restore_and_reopen
  execsql { DELETE FROM t1 WHERE a>32 }
  expr {[file size test.db] < $filesize}
} {1}
do_faultsim_test pagerfault-8 -prep {
  faultsim_restore_and_reopen
  execsql { 
    BEGIN;
    DELETE FROM t1 WHERE a>32;
  }
} -body {
  execsql COMMIT
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}

#-------------------------------------------------------------------------
# This test case is specially designed so that during a savepoint 
# rollback, a new cache entry must be allocated (see comments surrounding
# the call to sqlite3PagerAcquire() from within pager_playback_one_page()
# for details). Test the effects of injecting an OOM at this point.
#
do_test pagerfault-9-pre1 {
  faultsim_delete_and_reopen
  execsql {
    PRAGMA auto_vacuum = incremental;
    CREATE TABLE t1(x);
    CREATE TABLE t2(y);
    CREATE TABLE t3(z);

    INSERT INTO t1 VALUES(randomblob(900));
    INSERT INTO t1 VALUES(randomblob(900));
    DELETE FROM t1;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-9.1 -prep {
  faultsim_restore_and_reopen
  execsql { 
    BEGIN;
      INSERT INTO t1 VALUES(randomblob(900));
      INSERT INTO t1 VALUES(randomblob(900));
      DROP TABLE t3;
      DROP TABLE t2;
      SAVEPOINT abc;
        PRAGMA incremental_vacuum;
  }
} -body {
  execsql {
    ROLLBACK TO abc;
    COMMIT;
    PRAGMA freelist_count
  }
} -test {
  faultsim_test_result {0 2}
  faultsim_integrity_check

  set sl [db one { SELECT COALESCE(sum(length(x)), 'null') FROM t1 }]
  if {$sl!="null" && $sl!=1800} { 
    error "Content looks no good... ($sl)" 
  }
}

#-------------------------------------------------------------------------
# Test fault injection with a temporary database file.
#
foreach v {a b} {
  do_faultsim_test pagerfault-10$v -prep {
    sqlite3 db ""
    db func a_string a_string;
    execsql {
      PRAGMA cache_size = 10;
      BEGIN;
        CREATE TABLE xx(a, b, UNIQUE(a, b));
        INSERT INTO xx VALUES(a_string(200), a_string(200));
        INSERT INTO xx SELECT a_string(200), a_string(200) FROM xx;
        INSERT INTO xx SELECT a_string(200), a_string(200) FROM xx;
        INSERT INTO xx SELECT a_string(200), a_string(200) FROM xx;
        INSERT INTO xx SELECT a_string(200), a_string(200) FROM xx;
      COMMIT;
    }
  } -body {
    execsql { UPDATE xx SET a = a_string(300) }
  } -test {
    faultsim_test_result {0 {}}
    if {$::v == "b"} { execsql { PRAGMA journal_mode = TRUNCATE } }
    faultsim_integrity_check
    faultsim_integrity_check
  }
}

#-------------------------------------------------------------------------
# Test fault injection with transaction savepoints (savepoints created
# when a SAVEPOINT command is executed outside of any other savepoint
# or transaction context).
#
do_test pagerfault-9-pre1 {
  faultsim_delete_and_reopen
  db func a_string a_string;
  execsql {
    PRAGMA auto_vacuum = on;
    CREATE TABLE t1(x UNIQUE);
    CREATE TABLE t2(y UNIQUE);
    CREATE TABLE t3(z UNIQUE);
    BEGIN;
      INSERT INTO t1 VALUES(a_string(202));
      INSERT INTO t2 VALUES(a_string(203));
      INSERT INTO t3 VALUES(a_string(204));
      INSERT INTO t1 SELECT a_string(202) FROM t1;
      INSERT INTO t1 SELECT a_string(203) FROM t1;
      INSERT INTO t1 SELECT a_string(204) FROM t1;
      INSERT INTO t1 SELECT a_string(205) FROM t1;
      INSERT INTO t2 SELECT a_string(length(x)) FROM t1;
      INSERT INTO t3 SELECT a_string(length(x)) FROM t1;
    COMMIT;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-11 -prep {
  faultsim_restore_and_reopen
  execsql { PRAGMA cache_size = 10 }
} -body {
  execsql {
    SAVEPOINT trans;
      UPDATE t2 SET y = y||'2';
      INSERT INTO t3 SELECT * FROM t2;
      DELETE FROM t1;
    ROLLBACK TO trans;
    UPDATE t1 SET x = x||'3';
    INSERT INTO t2 SELECT * FROM t1;
    DELETE FROM t3;
    RELEASE trans;
  }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}

#-------------------------------------------------------------------------
# Test fault injection when writing to a database file that resides on
# a file-system with a sector-size larger than the database page-size.
#
do_test pagerfault-12-pre1 {
  testvfs ss_layer -default 1
  ss_layer sectorsize 4096
  faultsim_delete_and_reopen
  db func a_string a_string;

  execsql {
    PRAGMA page_size = 1024;
    PRAGMA journal_mode = PERSIST;
    PRAGMA cache_size = 10;
    BEGIN;
      CREATE TABLE t1(x, y UNIQUE);
      INSERT INTO t1 VALUES(a_string(333), a_string(444));
      INSERT INTO t1 SELECT a_string(333+rowid), a_string(444+rowid) FROM t1;
      INSERT INTO t1 SELECT a_string(333+rowid), a_string(444+rowid) FROM t1;
      INSERT INTO t1 SELECT a_string(333+rowid), a_string(444+rowid) FROM t1;
      INSERT INTO t1 SELECT a_string(333+rowid), a_string(444+rowid) FROM t1;
      INSERT INTO t1 SELECT a_string(44), a_string(55) FROM t1 LIMIT 13;
    COMMIT;
  }
  faultsim_save_and_close
} {}
do_faultsim_test pagerfault-12 -prep {
  faultsim_restore_and_reopen
  execsql { PRAGMA cache_size = 10 }
  db func a_string a_string;
} -body {
  execsql {
    UPDATE t1 SET x = a_string(length(x)), y = a_string(length(y));
  }
} -test {
  faultsim_test_result {0 {}}
  faultsim_integrity_check
}


#-------------------------------------------------------------------------
#
do_test pagerfault-13-pre1 {
  faultsim_delete_and_reopen
  db func a_string a_string;
  execsql {
    PRAGMA journal_mode = PERSIST;
    BEGIN;
      CREATE TABLE t1(x, y UNIQUE);
      INSERT INTO t1 VALUES(a_string(333), a_string(444));
    COMMIT;
  }
  db close
  file delete -force test.db
  faultsim_save
} {}
do_faultsim_test pagerfault-13 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { CREATE TABLE xx(a, b) }
} -test {
  faultsim_test_result {0 {}}
}

}


finish_test